Question about Epson Stylus Photo R300 InkJet Printer

1 Answer

Service ink reset error epson R265

I have the error on my EPSON R265 printer saying "Parts inside your printer
are at the end of their service life. Contact your dealer for replacement."
I have got the SSC reset application, but i cant get anything to even start
as the green light wont come on. All i have are the ink and the paper,
buttons both flashing RED. I have removed most of the old waste ink with a
large syringe, so no danger of overflowing (hopefully ?) How can i get the
green light backon to try the reset application ?
regards
Doc

Posted by on

  • reetax Feb 28, 2009

    I already did that, all i got was this reply



    "Epson does not consider our inkjet printers to be user serviceable, due to the specific knowledge and training required to successfully disassemble, repair and reassemble the products"

  • reetax Feb 28, 2009

    I already tried that. All i got was this stock reply from epson

    " Epson does not consider our inkjet printers to be user serviceable, due to the specific knowledge and training required to successfully disassemble, repair and reassemble the products"

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 54 Answers

Try to find out how to completely reset your machine through your manufacturer

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got end or service life error for parts. Replaced waste ink pads. Used Ink Reset Utility from Epson website. Still getting error.


You may need to use the reset utility again. there are other reset utilities for Epson "end of service life" issues, search on google.

Oct 07, 2015 | Epson Stylus Photo RX580 All-In-One...

1 Answer

My Epson R265 is sending a message saying that it


If the lights are flashing alternately and slowly (with the power light off), then the waste ink absorbers are full.

The pads are near the bottom of the printer and can either be replaced (call the service department for the parts) or rinsed clean under running water. The hard part is usually extracting them (you need to disassemble the printer most of the time). Then (if reusing the pads, wait until they are dry) reinstall them and reset the waste ink counter. The reset requires a program such as the one available here: http://inkjetprinterhelp.us/epsonSSC.html . Do not run this utility until the pads are replaced, the ink will smear everywhere. Epson used to have a link for their own reset tool but I do not see it for this printer.

However, the printer is designed that under normally usage, the waste ink absorber will be full at the expected end of life of the printer. Thus additional failures may be coming.

I hope this helps.

Cindy Wells

May 04, 2010 | Epson Stylus R265 InkJet Photo Printer

2 Answers

Epson Stylus C66 PRINTER KEEPS ON FLASHING RED LIGHTS ON THE INK BUTTON AND PAPER BUTTON


Check the status monitor on the PC, this will tell you the error. If service error it need the wast ink pad counter resetting

Mar 13, 2010 | Epson Stylus R265 InkJet Photo Printer

2 Answers

Parts inside your printer are coming to the end of their life


It could be the Waste Ink Pad. Call Epson tech support for the correct answer. If it is the pad go to the site below and get a Waste Ink Container. It sits outside the computer. Lood at the CISS, it will save you Tons of money.

http://www.inkproducts.com/ink-store/

Aug 04, 2009 | Epson Stylus Photo® R800 InkJet Printer

1 Answer

2 red lights are flashing on my printer epson R265(END OF LIFE TIME SERVICE)


U can find resetter (SSC Utility or R265 Adjusment) at indoreset.blogspot.com. Reset the waste ink counter.Good luck.

May 29, 2009 | Epson Stylus R265 InkJet Photo Printer

1 Answer

Epson r265 needs service


If the error says, parts inside your printer are at the end of their service life, the ink pad on your printer needs to be replaced. Then log on to epson.com/ipr to get the ink pad reset utility software. The software runs on win xp and win vista.

May 01, 2009 | Epson Stylus R265 InkJet Photo Printer

1 Answer

EPSON R265


You need to reset the printer with a program that i can email you.. contact me at anthonyashworth@live.co.uk

Jul 11, 2008 | Epson Stylus R265 InkJet Photo Printer

3 Answers

Epson Stylus CX1500


epson cx1500 reset porgram:

pop up for epson advises:

Parts inside your printer are at the end of their service life.

Feb 11, 2008 | Epson Stylus CX1500v Printer

Not finding what you are looking for?
Epson Stylus Photo R300 InkJet Printer Logo

522 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...