Question about Televison & Video

3 Answers

Remote codes I'm trying to find universal remote codes for me vcr to put on my one for all ...remote controller

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 57 Answers

Http://www.oneforall.com

Hope this helps.
Len

Posted on Feb 27, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Quoting from the Samsung VR8559 Users Manual:
Controlling a Compatible TV

You can program your VCR remote to control some functions of a connected TV:
1. Turn the TV on and point the VCR remote at the TV.
2 Press and hold down the "TV" button on the remote control. At the same time press the appropriate number buttons according to the chart below. When the TV turns off, programming is completed.

The remote now controls the TV functions show in the chart below.

This remote will not operate all TV's made by the manufacturers listed below. If your TV does not respond to any of the button combinations, the TV probably cannot be controlled by this remote control.

BRAND Samsung Sharp Sony Magnavox Sanyo Goldstar(new)
CODE 01 02 03 04 05 06

BRAND RCA/GE Goldstar(old) Toshiba Hitachi JVC
CODE 07 08 09 10 11


BRAND Panasonic1 Mitsubishi Samsung(new) Samsung(latin)
CODE 12 13 14 15


BRAND Sharp Zenith Goldstar(latin) Daewoo Sanyo Emerson
CODE 16 17 18 19 20 21


BRAND Sharp Samsung(latin) Panasonic2
CODE 22 23 24

Posted on Apr 02, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

REMOTE CONTROL MISSING

Posted on May 12, 2009

3 Suggested Answers

  • 1 Answer

SOURCE: oneforall codes

i need a tv code 4 scott

Posted on Dec 26, 2008

  • 1 Answer

SOURCE: Remote control code for Philips VCR & DVD player DVP3340V/17

If you have Dish Network and I suspect if you have Direct TV or a cable providers, you can use your remote for that service provider to find your VCR code. For the Dish you can look in the user's guide on pages 9 and 19 to see how to do a "Device Code Scan" and "Check Device Code".
To Scan: #1: Turn on the device you wish to scan for a code, #2 Press and hold down the button on your Dish remote for that device until all the buttons light up and the specific device button is flashing, #3 Press the blank power button, #4 press the up or down button until until your VCR tuns off, #5 Press the POUND ( # ) key to store the code number and #6 Press the blank power key to turn the device back on.
To Check the Device Code: #1 Press and hold down the device key until all buttons light up and the device button is flashing, next press the POUND ( # ) key TWICE ! The Mode button will flash to code number with a pause between each number, i.e. 5 flashes, pause 3 flaskes, pause one quick flash is 530. Write down this number and you are rady to go !

Posted on Jan 21, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to match up a triantianyong TV-139F universal tv remote to this LCD TV DVD combo.


Search Results

    Universal Remote Controls - Encompass Parts

    https://www.encompassparts.com/staticlist/Universal_Remote_Controls
    TVs made since 1988. Works Mitsibushi . TVs only. Will not operate. TV/VCR or DVD Combo units. ... fully operate yout TV. Full function replacement remote for ToshibaTVs made since 1988. ... 2004-2005 LCD TV's. ON/OFF, CHANNEL +/-, ...

    Universal TV Remote ' eBay

    www.ebay.com/bhp/universal-tv-remote

    eBayUniversal Remote Controller 6 IN 1 TV DVD VCR Satellite Receiver Cable Box Audio... control for Samsung LED/LCD TV is the lastest product, easy to operate and ...damaged or needs to be substituted, or when you dxxire to have a combi.

    Codes For Universal Remotes ' Universal Remote Control ...

    codesforuniversalremotes.com/

Feb 05, 2016 | Universal Televison & Video

3 Answers

I have two RCA remotes. 1st RCU 310 5538P. 2nd RCU 400 2420BB.


Remote Control Support - RCA ' Made for Moments

www.rca.com/support-remotes

RCARemote Control Support. Select your Type of Remote. Remote Code Finder ...RemoteProgramming. Cable/Satellite Receiver Codes. Select Your Provider.

RCA Universal Remote Control- Target Programming ...

www.thompsontv.com/rcarc.html
RCA Universal Remote Control-Programming Codes. ... Universal Remote. The remotemay already be set up to operate your brand of TV, VCR, or Cable Box.

Program an RCA Universal Remote Without a "Code Search ...

www.wikihow.com > ... > TV and Home Audio > Television

wikiHowHow to Program an RCA Universal Remote Without a "Code Search" Button. Do you have an older RCA universal remote that you want to use, but it lacks a ...

Jan 23, 2016 | RCA Televison & Video

2 Answers

I need code for philip s remote for a sayno ty


Philips rca universal remote codes sayno vcr dvd combo ...

www.fixya.com > ... > Remote Controls
Universal Philips Magnavox remote for a Sanyodvd vcr combo ? I have a cableremote and need to program my Magnavox vcr/dvd combo into it i have 2 dvds ...

How to Reprogram a Philips Universal Remote Controller ...

science.opposingviews.com > Computers

Dec 21, 2015 | Philips Televison & Video

1 Answer

My Sony VCR Model SLV-662HF will not accept cassettes. I am using a universal remote control. The VCR's display shows APC 71501 and 81508. Do these APC codes refer to the VCR or the All In One universal...


The codes are to program the universal remote control to communicate with the Sony VCR. Try programming the universal remote using one of these: 60000 60032 60033 60035
The acceptance of the cassettes may not be related to the use of a universal remote control. If the URC doesn't have the "equivalent" functionality of the VCR's original remote control, you may not be able to use the URC to perform the functions of the original remote control.

Dec 13, 2013 | Sony Slv-662hf 14" Vcr Plus Rmt-v266...

2 Answers

I need code for URC-3220 Universal remote control for toshiba tv/vcr in one.


I can help you reprogram your URC-3220 Universal Remote for your Toshiba TV/VCR Combo.

The Toshiba TV/VCR Combo codes are 1145 & 0845.

Please review my Fixya Tip posts for:

TV/VCR/DVD Combo Codes
Searching for the proper codes, or
Downloading the URC-3220 users manual / owners guide.

I hope that helps.

Apr 07, 2010 | Universal Remote Control Remote Control

1 Answer

How can i get the code for a ge universal remote?


press your code search button until it blinks red light then press vcr button make sure vcr is turned on. After pressing vcr button press power button on remote repeatedly until power on vcr turns off then press enter on remote should be set for you

Sep 22, 2009 | Universal Remote Control GE174Universal...

1 Answer

I have a GE universal remote and a Toshiba VCR...I need the code. Anyone?


Code should be in the userguide or something that was delivered with your Toshiba VCR, otherwhise a code should be in a guide of the universal remote, if not, then try finding the code by using google like this : 'universal remote code for Toshiba VCR *type here the specific vcr type* '
That should work;)

Jun 22, 2009 | Universal Remote Control NspireGear MP3...

2 Answers

Cannot find remote code for panasonic TV/VCR combo for RCA remote


Here is a list of codes for your remote. Please follow any of the links below to get your codes.
Results 1 - 10 of about 324,000 for rca universal remote codes. (0.26 seconds)
Search Results
  1. RCA Universal Remote Control-Programming Codes RCA Universal Remote Control-Programming Codes. ... The remote may already be set up to operate your brand of TV, VCR, or Cable Box. ...
    www.thompsontv.com/rcarc.html - 33k - Cached - Similar pages -
  2. How to Program an RCA Universal Remote Without a "Code Search ... wikiHow article about How to Program an RCA Universal Remote Without a.
    www.wikihow.com/Program-an-RCA-Universal-Remote-Without-a-%22Code-Search%22-Button - 42k - Cached - Similar pages -
  3. Universal Remote Control Codes Codes and links for a number of universal remote controls, including Sony, RCA, Memorex, Radio Shack, One For All and more.
    www.xdiv.com/remotes/ - 73k - Cached - Similar pages -

May 05, 2009 | RCA Universal Remote 3 Device Remote...

2 Answers

Code for remote control; vcr cmv61001


Most universal remotes provide some method of scanning through all the VCR codes 1 at a time, when you see the vcr go off you would then store that code. Read the book...

Geno

Feb 09, 2008 | Curtis CMV61001 VCR

6 Answers

Remote control code for magnavox dvd/vcr combo


I need codes for my Universal Philips Magnavox remote for a Sanyodvd vcr combo ?

Sep 07, 2007 | Philips Magnavox Learning Universal Remote

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

1,359 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72601 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...