Question about Kenmore Washing Machines

1 Answer

The spin cycle on my Kenmore 80 will not work. It wont spin at all. It washes and goes into rinse cycle but then wont spin at all.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,122 Answers

Lid switch or motor coupler is bad ,let me know what you find-mike

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore series 80 washer won't drain after wash cycle


Try the 'drain' portion of a few of the other cycles (heavy, perm. press, delicates) and see if it will drain/spin there. You can also try advancing the timer slowly through the 'spin' portion to see if it kicks in anywhere.

If it will rinse and spin in the other cycles, you most likely have a bad timer.

Hope this helps.

Sep 25, 2011 | Kenmore 22422 Top Load Washer

1 Answer

Rinse cycle do not disengaged


does it drain?did you check the lid switch?

May 17, 2009 | Kenmore Washing Machines

1 Answer

Won't complete cycle, stops at rinse. and can't get hot water.


Are you on well water? turn off the cold water to the washer and clean the screen filter out. do not leave filter out.
the machine probably has a cold only final rinse so it won't work properly.

Mar 22, 2009 | Kenmore 24032\24036 Top Load Washer

2 Answers

Kenmore 80 Series - machine won't rinse or spin


Manually move the timer to the SPIN mode and turn it on.
If nothing happens, replace the lid switch.
With a model number I could be more specific.

Feb 27, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

GOES TO SPIN CYCLE THEN STOPS SUDDENLY AND REFILLS WATER IN TUB


Are you sure you don't have a second rinse button that is selected.

Jan 11, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore washer series 80, Clothes still soapy


If you are getting no water spray during the rinse cycle that would cause the soapy clothes issue.

Are you getting cold water during the wash/rinse cycles? If you have the machine set to warm/warm you may only be getting hot water while the final spin is calling for cold.

If you have cold water available then the timer is not calling for the water spray. The problem is either in the mixing valve or the timer.

Jan 10, 2009 | Kenmore 23822 Top Load Washer

1 Answer

I also need the answer...


where is the lint trap located

Dec 06, 2007 | Washing Machines

1 Answer

80 SERIES NOT SPINNING


It wont be the capacitor or the motor wouldnt work on the wash cycle. It could be the lid switch, & yes you could bypass the switch to prove if it is open circuit, you may even find a burned out wire to the switch. TURN THE POWER OFF FIRST THOUGH!!

Oct 22, 2007 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...