Question about Baumatic B187 Electric Single Oven

1 Answer

Cleaning error E1 F5

I was doing the self cleaning on my oven and this error came on. My oven has been off for 24 hours and is still locked. The keypad is also locked. Any suggestions?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

The E1- F5 error is a door lock error.

The control (TIMER) has likely failed in this instance - BUT...

Sometimes when you disconnect power to a range and reconnect it the electronic range control gets confused.
You should disconnect power again for 15 seconds and reconnect and see if that helps.

If it doesn't cure the E1- F5 error hold the bake button in until E0- F2 appears in the display.
This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.

Sometimes these work, but if the control has failed it won't make any difference.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Oct 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What can I do for F5-E1 situation


F5 E1 Door latch not operating
1. Verify error code by pressing and holding CANCEL/OFF key for 5 seconds. Momentarily (less than 5 sec.)
press CANCEL/OFF key again to remove error code display.
2. If the door is not latched (locked), ensure that it is completely closed. Press CLEAN then START/ENTER.
Verify that the latch motor is operating.
3. Unplug range or disconnect power.
4. If motor did operate, check integrity of latch mechanism from cam/eccentric, through actuating rod, to latch
pawl and door slot. Ensure that pawl aligns with the door slot. Correct any mechanical malfunction.
Go to step 6.
5. If motor did not operate, check continuity of the latch motor and of electrical connections between oven
control and motor. If continuity is present, replace control.
6. Plug in range or reconnect power.
7. Put range into CLEAN mode to verify proper operation.


Read more: http://www.justanswer.com/appliance/1x8z5-erroe-code-f5e1-self-clean-oven-whirpool-supercapacity.html#ixzz3OCGodxiV

Jan 08, 2015 | Ovens

1 Answer

My whirlpool oven locke with F5 E1 what to do


The E1- F5 error is a door lock error.

The control (TIMER) has likely failed in this instance - BUT...

Sometimes when you disconnect power to a range and reconnect it the electronic range control gets confused.
You should disconnect power again for 15 seconds and reconnect and see if that helps.

If it doesn't cure the E1- F5 error hold the bake button in until E0- F2 appears in the display.
This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.

Sometimes these work, but if the control has failed it won't make any difference.

Thanks

Oct 05, 2011 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

I was using the Self Clean on the oven after a couple of hours I got an error message E1 and F5 - and the oven door is locked. I have no idea what that means or how to get the door open again. I tried...


Hello there and thank you for choosing fixya
Ok before i get into the error codes just a few words here about the self cleaning feature
This the feature that is the most harsh on these ovens due to the extremly high temperatures that is produced then this can and will cause serious problems if not done correctly
I know that people like this feature but i highly suggest that if you are going to use it please try to get the oven as clean as possiable before using this feature this helps the cleaning cycle tremendously ok?
Now for the error code
the e1 error dode is due to the door being locked so to repair this you need to unplug the oven and leave it sit for at least 1 hour this allows for the internal reset feature to reset the oven controle
after the hour is over plug it back in and in 1 to 5 min you may hear a audiable beep or click if so simply press the cancel button and attempt to open the door if so great you should be ok
Now for the bad one
The F5 code is due to the oven control sensing the extreem heat during self cleaning
and sensing that the controls are not controlling the temperature during cleaning which is a bad thing this can and will cause the control board to fail and once again due to the excessive heat
So hopefully once the oven has been unplugged for the hour and reset you should be allright but if not than you do have a bigger problem meaning that your controle board is shot ok?
Please keep me posted on how this is going so i can send you more information on this
Best regards Mike

Feb 18, 2011 | Whirlpool Ovens

1 Answer

Whirlpool Gold Self-Cleaning Oven Error Message: E1 F5. What does it mean and can I fix it?


E1-F5 means the self clean latch will not lock.

Try pressing down any key and hold for 1 minute, see if this clears it. If not you will most likely need the latch switch replacing.

Dec 20, 2010 | Ovens

1 Answer

Self cleaning cycle doesnt work. I keep getting an E1 F5 error. How do I get the self cleaning cycle o work?


The E1- F5 error is a door lock error.

The control (TIMER) has likely failed in this instance - BUT...

Sometimes when you disconnect power to a range and reconnect it the electronic range control gets confused.
You should disconnect power again for 15 seconds and reconnect and see if that helps.

If it doesn't cure the E1- F5 error hold the bake button in until E0- F2 appears in the display.
This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.

Sometimes these work, but if the control has failed it won't make any difference.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.!$WR

Sep 24, 2010 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

Trying to get gas self clean/oven to start. Getting error E1 F5.


E1 F5 is bad door lock assembly. Only way to repair is to replace the locking assembly completly. Sorry. Hope this helps.

Mar 06, 2010 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

Self cleaning feature


The E1- F5 error is a door lock error.

The control (TIMER) has likely failed in this instance - BUT...

Sometimes when you disconnect power to a range and reconnect it the electronic range control gets confused.
You should disconnect power again for 15 seconds and reconnect and see if that helps.

If it doesn't cure the E1- F5 error hold the bake button in until E0- F2 appears in the display.
This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.

Sometimes these work, but if the control has failed it won't make any difference.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.FGRT%$^

Jan 15, 2010 | Whirlpool 30" Self-Cleaning Freestanding...

2 Answers

I have a whirlpool/kenmore plus range that came with our house when we purchased it. Former owners did not leave a manual for it. The numbers on it are 95779890 and serial RJ3516457. I wanted to "auto...


The E1- F5 error is a door lock error.

The control (TIMER) has likely failed in this instance - BUT...

Sometimes when you disconnect power to a range and reconnect it the electronic range control gets confused.
You should disconnect power again for 15 seconds and reconnect and see if that helps.

If it doesn't cure the E1- F5 error hold the bake button in until E0- F2 appears in the display.
This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.

Sometimes these work, but if the control has failed it won't make any difference.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.@#$TERGD

Feb 26, 2009 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

E1 F5 error message when try to activate the self clean


The E1- F5 error is a door lock error.

The control (TIMER) has likely failed in this instance - BUT...

Sometimes when you disconnect power to a range and reconnect it the electronic range control gets confused.
You should disconnect power again for 15 seconds and reconnect and see if that helps.

If it doesn't cure the E1- F5 error hold the bake button in until E0- F2 appears in the display.
This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.

Sometimes these work, but if the control has failed it won't make any difference.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Dec 07, 2008 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

KEMORE OVEN SELF CLEANING


The E1- F5 error is a door lock error.

The control (TIMER) has likely failed in this instance - BUT...

Sometimes when you disconnect power to a range and reconnect it the electronic range control gets confused.
You should disconnect power again for 15 seconds and reconnect and see if that helps.

If it doesn't cure the E1- F5 error hold the bake button in until E0- F2 appears in the display.
This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.

Sometimes these work, but if the control has failed it won't make any difference.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Aug 12, 2008 | Kenmore 40494 / 40495 / 40499 Electric...

Not finding what you are looking for?
Baumatic B187 Electric Single Oven Logo

Related Topics:

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baumatic Ovens Experts

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1029 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

electric app

Level 1 Expert

16 Answers

Are you a Baumatic Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...