Question about Televison & Video

1 Answer

Menu on remote will not work

There is a white square on top left side of screen and all of the words are printing up on screen remote is hitachi clu-432UG when I push menu button menu options come up picture,sound ,set up. At bottom of screen it says press enter, there is no enter button or ok button and when you push menu button again menu program disapears. I bought a universal remote today but it will not bring up menu from tv. Do not know how to take square and text of tv can I get a new remote somewhere perferably a used one. This tv is not new

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers

If you are saying the white square is coming up when you are viewing TV it sounds like the closed caption is on, try o turn that off first. If that is not what you are describing then I am lost as to how an original remote does not have the funtions on it that are required to navigate the system

Posted on Feb 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fid the message icon to put back on home screen ?


After unlocking your HTC One, look right above the HTC logo on the bottom center of the phone face. Right above it is a square of nine white squares. Touch that square. Now, you'll see a list of ALL applications installed. That list can be sorted in multiple ways. To sort alphabetically, touch and hold anywhere on that screen of icons and pull down a bit. A menu will appear on the screen allowing you to select to sort alphabetically.. Once that's done, look for the Messages icon. 3112a4d4-3eeb-4c5b-9d46-d1057184e632.jpg
Touch and hold the icon. At the top of the screen a new menu will appear. While still holding the icon, drag it up to the word :Shortcut". The menu will disappear and your desktop will be available to drop the icon onto. If there is room, it'll now be on your desktop (once you let go). If there isn't room, while still holding, drag it to the left or right side to change desktop pages. Locate a page that has room, and let go. The icon will then be on that page. If you have no room, then you'll have to create a new page. If you do need more pages, repost for that instruction.

May 21, 2014 | HTC Mobile Phone One S Black

1 Answer

Big black square in middle of screen picture top to bottom about 36 " wide good audio and picture 6" on right and left side displaying.


If you have tried using different input devices, looked for loose contacts
in power outlet, RC Jack, cable and connectors, the TV might need service.

Aug 26, 2012 | Hitachi 55HDS69 55 in. Plasma Television

2 Answers

In the game hidden secrets their is a segment on matchsticks puzzle you have to move 3 matches and make 4 squares you cannot go to the side or down but can go up.the puzzle looks like a grid of 9 squares...


Matchstick puzzle, 4 squares moving 3 sticks. Move the left side matchstick from the top square that is on the left side of your screen. Place it on top of the square you just took it from. Move top and side stick on the square that is on the right top of your screen. Place them on top of the top square that is on the left side of your screen. You should see 4 squares

May 05, 2011 | Computers & Internet

1 Answer

I used to be able to select the draft option when printing, but this seems to have disappeared. I am using an Epson stylus TX100 printer and my document is in Word 7. How do I get draft back?


You can set the option to print in Draft mode while in Word. Follow the steps below and see if it works for you.

1. Go to the MS Office button in Word at the top left of the screen.
2. Then click on Word Options button located to the bottom right of the Office Menu.
3. Select the Advanced Options at the left of the screen.
4. Scroll down and look for the Print Advanced Options
5. Choose "Use Draft Quality"

You can also set your printer's properties to print in Draft mode. If you've tried that and it doesn't work I would suggest updating or reloading your printer's drivers. The print drivers may have become corrupted.

I hope that helps.








Apr 12, 2011 | Office Equipment & Supplies

1 Answer

My Hitachi 51S500 is showing a black screen


Did you unplug the set from the wall and wait 5 min. replug and try. Cusult your owner manual regarding parental Locks?

Sep 17, 2009 | Hitachi 51S500 51" Rear Projection...

1 Answer

Covergence out of alignment on 1/4 Vertical left side of screen


You need to manually adjust the alignment:
On remote, press Menu to get to the main menu
Then arrow down to "ADVANCED FEATURES"
Then press "enter"
Then Arrow down to "CONVERGENCE" and press "enter"
"Red Convergence" should be highlighted
Press "enter"
You now have Green, Red, and Blue overlapping crosses.
If Red is out of whack, use arrows to align
To toggle to blue (and back to red), press "VIDEO"
Then align blue cross
Once the crosses look aligned, and nice and white, press "AUDIO"
This will bring up the Advanced Convergence screen
This is a grid of the same overlapping colors
You have control over the Red and Blue
If Green is very out of whack, you'll need a repairman…
While the "target" is flashing, you can move it around the screen with the arrows
Place it over an intersection to adjust, then press "enter"
Now the "target" is steady (not flashing), and you can use the arrows move your color
When it's aligned, press "enter" again
Now "target is flashing, and you can go to the next square.
You cannot adjust every intersection.
Some areas need to be adjusted via the adjacent intersection
When you're happy with color you're working on,
Press "video" while target is flashing to change to the other color
Repeat the above (blue is much harder to see and adjust for me…)
When you're happy with the entire grid, start hitting "Menu"
Each press brings you back out one menu level, until you are out of them
Once you're used to the process, it should take no more than a minute or two.

Mar 02, 2009 | Mitsubishi WT-46805 46" Rear Projection...

1 Answer

Picture behind a square


The problem is the close caption turn it off again and when the square leave turn the set off.

Aug 13, 2008 | Philips 60PP9202 60" Rear Projection...

2 Answers

Shadowing


GOOD DAY ND GOOD LUCK;

TRY THIS, IT WILL CORRECT CONCERN:

50V500 ONLY
GHOST: May be described as "Out of Convergence" but ghost is still attached to main image.
CONDITION:
A "ghost image" appearing to the left or right of images in the picture. Can be varying shades of a primary color (red, green, or blue) as well as gray. Can easily be seen in the 4 x 3 mode, at the edges of the picture.
CORRECTION:

To correct the problem, please do as follows:
  1. Access I2C Menu. (See page 57 of the Service Manual).
  1. To enter the I2C Service Menu, with power off, (on the front control panel) press and hold the INPUT button. Then press the POWER button for two seconds. The following Service Menu will appear.
03b_ghost_image01.gif Figure 1
  1. BEFORE CONTINUING: CONFIRM THAT THE R, G and B DRIVE ARE SET AT 40.
  • Be sure to press SELECT after each change to SAVE the new Data.


  1. Using the Remote Control joy stick, scroll down to next page (see Figure 2) until LCD ADJUST is highlighted.
03b_ghost_image02.gif Figure 2
  1. Move the joy stick to the right to cursor right once. The next page will appear with the word GHOST highlighted.
  2. Cursor right again, and a white screen will appear with a BLACK SQUARE in the center, as in Figure 3. You will see LCD ADJUST, followed by “SHP” and a number (value).
03b_ghost_image03.gif
Figure 3

  1. If the unit is out of adjustment, you will see a gray ghost on either side of the black square. Move the joystick to the right or to the left until the ghost disappears. The number values will change up or down.
    • If the ghost adjustment is off with a lower value, there will be a ghost to the left of the square.
    • If the ghost adjustment is off with a higher value, there will be a ghost to the right of the square.
  2. Once you get the square to look good without ghosts, press "SELECT" to save any data values that have been changed.
  3. Press the "EXIT" button three times to return to normal picture.
  4. Adjustment is completed
  5. I HOPE THIS WAS HELPFUL, big IRISH.




Jul 26, 2008 | Hitachi 50V500 50 in. HD-Ready LCD...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73474 Answers

Cindy Wells

Level 3 Expert

5023 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...