Question about Pioneer Elite PRO-1140HD 50 in. Plasma HDTV

1 Answer

Hello there, Just hooked up the 60 inch Kuro, was watching a movie and accidentally hit "VIDEO SELECT." Now the screen is black, but I can still here the audio. Don't know how to get the picture back! Please help!! Thanks

Posted by on

  • 4 more comments 
  • beccablush Feb 27, 2009

    Ok thanks. I'll go try it now.



    Rebecca

  • beccablush Feb 27, 2009

    Hey Rik,



    Okay, so the input is on 1, which is what I need it on, but the screen is still blank. I accidentally hit that button on the Blu Ray remote...any idea's?



    Rebecca

  • beccablush Feb 27, 2009

    I did :( and it didn't work

  • beccablush Feb 27, 2009

    nope...no av select on the blu ray remote. I'll try what you last said: press video select till it switches back to hdmi (yes i am using the hdmi connection)



    Thanks for your help Rik!!

  • beccablush Feb 27, 2009

    sorry to bother you again. I read in the instructions that if you hit "video select" it may take a while for video to be seen. So I keep pressing it, hoping to get back to the hdmi connection. Do you know how long I should wait (too see if it's the right connection) before pressing it again? Should I be waiting 5 seconds, or 5 minutes?

  • beccablush Feb 27, 2009

    Thanks for the help Rik. It's working now :)

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 77 Answers

Hiya

press the av button ar input and select the input you need

Rik

Posted on Feb 27, 2009

  • 2 more comments 
  • Richard Ray Feb 27, 2009

    bex press that button again and shud go bk to wot it was

  • Richard Ray Feb 27, 2009

    is therea av select on the blu ray remote ?

  • Richard Ray Feb 27, 2009

    oh yeah if you press that it will change it from hdmi output to scart so its a matter of pressing it till it switches back to hdmi i assume ur using the hdmi connection

    Rik


  • Richard Ray Feb 27, 2009

    hiya bex


    5 secs is normally fine shudnt take much more then that

    Rik


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tv image goes off while watching tv,I do have audio but no image.


LG 42LS5700 - LG.com

www.lg.com > Home > Support > Product Support

LG ElectronicsTV/Audio/Video; TVs; 42LS5700 ... TV Support Landing Page - HDTV/Netcast/webOS 1.0/webOS 2.0 ... Adjusting Picture Settings - webOS 2.0 Video ... quality and convenience of complimentary shipping when buying directly from LG.com. ... Curved TVs · 22 Inch to 29 Inch Class TVs · 32 Inch to 39 Inch Class TVs · 40 Inch ...

Amazon.com: Customer Reviews: LG 42LS5700 42-Inch ...

www.amazon.com/LG-42LS5700-42-Inch.../B006ZH...

Amazon.com, Inc.LG 42LS5700 42-Inch 1080p 120Hz LED-LCD HDTV with Smart TV (2012 Model). byLG. Size: 42-Inch ..... images are nice and crisp when viewing HD content.

Widescreen TV Black Screen - Repair LCD LED PLASMA ...

? 3:41
https://www.youtube.com/watch?v=RbZncfiOXQA
Jul 13, 2011 - Uploaded by FixItUrselfDummy
Fix your tv with black screen blinking light, popping sound noise. ... Watch QueueQueue ... TV Black Screen - Repair LCD LED PLASMA - Problems SONY LG .... I have a 60 inch samsung DPL tv how can I stop the humming or ... What do I do if my tvturns on but its just a black screen so sound no picture?.

Jan 11, 2016 | LG 42LS5700 42 Inch 1080p 120Hz Smart TV...

1 Answer

How do I hook up a laptop to my 32 inch element to watch movies?


You have to activate the external video port. Usually F8. Check your owners manual.

Nov 18, 2014 | Element ELCHW321 32-Inch Class 720p 60Hz...

1 Answer

Hello everyone , when i play a game or watching a movie.. the va912b ViewSonic turns black screen and displays "No Signal" it doesnt happen very often but its mostly when i play games or watch...


The problem is probably with video card
First check the cooling fans on cpu and video, clean with vacuum if necessary
Then try to replace the video card

May 19, 2011 | Computers & Internet

1 Answer

I have a quadro 1500 fx card and 2 monitors. I have one dell 17 inch and a regular TV. It is hooked up as follows. from the card then from dvi adapter to VGa is the dell monitor. The TV is hooked up from...


If you have the right drivers set up for your video card, you should be able to to set up screen mirroring from your display settings. Right-click on your desktop, select Screen Resolution and make sure both screens are showing up. If they are, then under Multiple displays, select Duplicate these displays. That should get it working for you.

May 04, 2011 | PNY Quadro FX 1500 Workstation -, GDDR3,...

1 Answer

Hello I have just acquired a LEGACY LD58MT the audio it works very well but when putting a movie in any format the screen puts on in black with a message that WARNING PLEASE STOP VIDEO WATCH PLAYER says...


This unit was not designed to be used while the car is in motion. Your parking brake must be in the engaged position in order to view the monitor. The brake wire must be hooked up to the parking brake wire or grounded in order for this function to work properly.

May 20, 2010 | Legacy LD58MT Car DVD Player

2 Answers

Looking for user manual for philips magnavox tv. 9P6044 C104, 3911Q1716. Trying to find out how to hook up my VCR to this tv. It has s viedo, video, L audio & R audio holes on front side of tv. I want...


Barb..be sure you run a TV signal through the VCR first. And then a coaxial from the VCR to the TV. This is the easiest solution for now. And set the vcr to tv/video {channel your movie is on}hit record and hit tv/video and watch your tv for another movie!

Feb 06, 2010 | Philips 9P6044C 60" Rear Projection...

2 Answers

I have a Sonic Impact V55 Video player and a new 160GB Ipod. Anyway to get the video to work on it?


Absolutely, I have this myself. My 5th Gen works great, but the 160GB would not show movies, just played music. Apple has an adapter cable set that allows you to hook your Ipod to your TV. $50 buy it! You can charge and watch your stuff on your flat screen. It also unlocks your Ipod TV out setting for your Video 55. Set you IPOD video setting to TV Out: on, select your movie and play. Plug in the IPOD nip to your Ipod then set your Ipod into the Video 55. A bit of a pain but works flawlessly. If you select a different movie you have to do this all over again.

Oct 30, 2009 | Sonic Impact Technologies Sonic Impact...

2 Answers

When I try to play a movie, I only see the warning sign on the screen. I can hear the movie playing, but the warning will not go away. This is even when the vehicle is in park. Any ideas what may be wrong?


Bypass Code
1. Go into Am/Fm mode
2. Hit "setup" on the remote control
3. Enter 543210 on the remote, listening for the beep for each number entered
4. A new menu will appear. Touch the button that has the hammer/screwdriver on it in the upper left-hand part of the screen
5. Select Brake bypass to "ON" and hit the "X" near the bottom of the screen

Aug 18, 2009 | Jensen's VM9312 Car DVD Player

1 Answer

Problem watching movies & playing games(screen flashes black on & off


HI
This may not help, but you can try to lower the resloution to another widescreen format.
I'm thinking you may have your resolution maxed out and the video card is having problems with the movie games because of that. Possibly not enough video memory
Movies will work fine at lower resolutions, Not sure about all the games but they probably will too.
Fran

Oct 15, 2008 | Computers & Internet

1 Answer

Display problem


hit the display button

Aug 11, 2008 | GoVideo Go Video DVD/VCR Combo

Not finding what you are looking for?
Pioneer Elite PRO-1140HD 50 in. Plasma HDTV Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...