Question about Belkin Wireless-N Wireless Router with 4-Port Switch

1 Answer

Installation I need instructions on how to install Belkin N Wireless Router

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 93 Answers

User manual: http://www.belkin.com/support/article/?lid=en&pid=F5D8233-4&aid=8340&scid=942

Don't forget to make a WPA key to secure your network. (WPA is stronger than WEP encryption) also AES is stronger than TKIP.

Other than that you should just plugin your WAN (modem) to the router in the specified port and then plugin any wired connections, if you don't have any you need to use the wireless connection and connect to your router and set it up that way.

The setup address should be 192.168.0.1, or 192.168.1.1, or it maybe be different, in that case go to start>run>type cmd and then type in ipconfig in the command prompt, and the gateway address is the one that is the router setup IP. Enter that into your web browser (if the first 2 don't work, use the cmd/ipconfig method to findout the gateway address.)

After that you can refer to the manual since I dont have the same router.

Sorry if thats not enough help!

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got my password


Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Nov 19, 2012 | Belkin Wireless-G Plus MIMO Router with...

1 Answer

I have a normal small phone connection but the router takes a large er pin connector. what can I do


Ahh, now I understand. Somewhere in the instructions, you need to turn your Belkin into a Wireless Access Point. The Netgear is your MODEM and router. It's the interface to your DSL line. Since it already has a router, the only thing you gain from the Belkin is wireless access.

There shoud be instructions to either turn off the router in the Netgear, or convert the Belkin to a WAP. I'd do the Belkin.

Carl

Mar 17, 2010 | Belkin Wireless-N Wireless Router with...

1 Answer

The Belkin wireless router I am trying to set up is set as an access point and I want to turn it into a secure home network. How can I do this?


You need to provide a model number for the router.

Here is a link to Belkin where you can select your model number and get more help:

http://en-uk-support.belkin.com/app/product/list/q/routers/session/L3NpZC81QURmM0JUag%3D%3D

Feb 03, 2010 | Belkin Wireless-G Plus MIMO Router with...

1 Answer

Password change


if you have forgotten your password, the only option is to reset the router. This will bring the router back to factory defaults.
Hope this helps
thanks - neoranjit

Aug 20, 2009 | Belkin Wireless-G Plus MIMO Router with...

1 Answer

Need upgrade for belkin router


If you have the model number of the router you can go to this site and download the drivers.

http://www.belkin.com/support/?lid=en

Have a great day...
Tim

Mar 26, 2009 | Belkin Wireless-G Plus MIMO Router with...

1 Answer

I have a belkin wireless g+mimo router without usb adapter can i install this and make it a wired network this is my first router


YES YOU CAN IT SHOULD HAVE PLUG-INS FOR ETHERNET AND YOUR ISP INLET ON THE BACK OF IT ALSO G+MIMO OFFERS NICE SPEED WIRED OR WIRELESS.

Mar 09, 2009 | Belkin Wireless-G Plus MIMO Router with...

1 Answer

Installation CD


I lost my installation CD and received these instructions from the Belkin Tech Support, and was able to install the Wireless N Router with no problems.
Follow the steps given below for configuring the Belkin N router manually.
- Connect the computer to the "LAN" port on the router and connect the modem to the Internet/"WAN" port, using Ethernet cables. 
- Take a paper clip, insert the paper clip in the reset hole of the router and hold it for 15 seconds.
- The power light will flash and then come back "ON" solid, indicating that the router is being restored to factory defaults.
- The corresponding lights on the front of the router should be lit up.
- On the computer, check if you have an IP address in the range of 192.168.2.x.
- If not, specify a static IP address, gateway and "DNS" address by following the steps given in the link-
http://web.belkin.com/support/kb/kb.asp?a=2824 
- Log on to the router web interface by typing in http://192.168.2.1, in the address bar of your browser.
- By default, the password is blank.
- Click on "Connection Type" in the left hand column under "Internet WAN" heading.

If the connection type is Dynamic (cable):

- Choose "Dynamic" and then click on "Next". 
- Type in your “Host Name”, if you’re Internet Service Provider has provided it. Else, leave it blank.
- Click on "Change WAN MAC Address".
- Click on the button "Clone".
- Click on "Apply Changes". 

If the connection type is PPPOE (DSL):

- Choose "PPPOE" and click on "Next".
- Enter the user name and password given by your Internet Service Provider.
- Save the settings.
- Click on the "Home" link at the top of the screen. 

Internet Status should show "Connected" on the top right hand corner of the web page.

If the problem persists, please get back to us with the following information:

1. Type of connection provided by your ISP (Is it PPPOE, Dynamic or static).
2. Name of the Internet service provider (ISP).

Aug 11, 2008 | Belkin Wireless-N Wireless Router with...

1 Answer

Belkin wireless g router


Have you tried e-mailing Belkin Customer Support? I had a similar problem, with my PC, they sent the info I needed and I was on line in under 6 minutes (this after spending many frustrating hours scouring the internet).

May 23, 2008 | Wireless Access Points

Not finding what you are looking for?
Belkin Wireless-N Wireless Router with 4-Port Switch Logo

Related Topics:

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Wireless Access Points Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

Mike

Level 3 Expert

4331 Answers

Are you a Belkin Wireless Access Point Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...