Question about Canon PIXMA MP150 All-In-One InkJet Printer

2 Answers

Computer won't print because of paper jam which we cannot find

My Canon Pixma MP 150 will not print anything because it is telling me I have a paper jam which we cannot find. We have looked inside with a flashlight and cannot see anything.

When we print, the Alarm button lights up and then on the computer monitor it says we have a paper jam. Hope you can help me.printer states Load paper. once i load paper and ready to print , it won't feed it through it. therefore, i am on a constant load paper mode without feeding paper through the printer causing the printer to never print

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,800 Answers

  1. remove usb cord from pc.
  2. uninstall software.
  3. reboot
  4. insert CD and install the soft.
  5. plug the usb cord and print a TEST page.

Posted on Feb 27, 2009

  • Jalal Sordo
    Jalal Sordo Feb 27, 2009

    also if that is not working tell me so we can work on the hardware part of a paper jam error

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 237 Answers

There is a sensor flag that is causing it to throw out a false jam. It is a black plastic peice that is one where the paper feeds through that tells the printer that the paper has reached its destination.

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Canon Pixma MP 240 printer. It's been out of black ink. I installed a new ink cartridge. Now, there's an "E3" flashing on the screen. And it won't print anything.


Error E3 indicates that there is a paper jam.

Firstly remove the ink cartridge you have just installed and check to see if there are any bits of paper underneath that.

Secondly check the rest of the printer for any jams paying careful attention to any rollers as small bits of paper can get stuck to them.

Dec 17, 2010 | Canon PIXMA MP240 All-In-One InkJet...

1 Answer

Keeps telling me paper jam but seems there is no at all


possible hardware problem.. on the part of printer..

i thnk you can do is un install the driver and try to re install again

Aug 25, 2009 | HP LaserJet 3200 All-In-One Printer

2 Answers

Printer is not feeding the paper through but acts as though it is printing


hi,
CANON PIXMA MP160 All-In-One InkJet Printer
has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....
75aba9d.jpg3f22050.jpg

http://www.canon.com/printer/prob676ijt65/solution

prirweto-i-7

Apr 20, 2009 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

I Have a problem with my canon MP 150 Printer


From Canon Support: "Please be advised that if the MP 150 is displaying the letter E followed by number 3, this would indicate a paper jam. "

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=16981

Jan 17, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

I have canon PIXMA MP


E3 error on the MP150 is a paper jam error. Make sure that there is nothing obstructing the paper going into the printer and that the feed mechanism doesn't have anyhting in it. Also run a roller cleaning from the printer software.

Nov 23, 2008 | Canon Printers & Copiers

1 Answer

Canon pIXMA mp 150


This is definitely a mechanical problem. You might want to at least partially take the printer appart and inspect it very thoroughly if you haven't done so yet. Did you have any paper jams before? Sometimes when you remove a paper jam the sheet rips and you end up with some shreds of paper lodged in the printer mechanism causing more jams. Another possibility might be cracked or bent paper guides, or simply dirty rollers (these you can clean with alcohol).

Aug 28, 2008 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Blinking E / 3 - string fell in the paper feed and jammed. Now what?


To reset MP 150

1,power off, hold stop/reset ,power on;

2,hold power,release stop/reset, push stop/reset twice;

3,wait untill Led show "0",push stop/reset four times;

4,push power twice.

finish

Aug 18, 2008 | Canon PIXMA MP150 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MP150 All-In-One InkJet Printer Logo

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96333 Answers

old marine
old marine

Level 3 Expert

1453 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...