Question about Onkyo TX-8511 Receiver

1 Answer

Onkyo tx8511. Receiver working fine, power went out

Now nothing! Lights come on, and I was able to hear music thru headphones, but not my speakers. checked the fuse, and it looks ok.
Now what?

thanks

tt

Posted by on

  • towlertons Feb 28, 2009

    I checked and this is not the problem. I did notice that when I turn the volume all the way up on receiver that I was able to hear sound out of speakers. Also, when the problem started I was listening to satellite radio thru the internet. Can't seem to get sound out of the computer now either.



    Thanks for your help,



    TT

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Is channel B switch turned on? If so turn it off .

Posted on Feb 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix Onkyo AV Receiver Model: TX-SR706 no sound problem


Hi Shaun, the unit would have to be taken to one of our authorized service centers for repair as you have already tried the reset. Please follow the link below to our Authorized Service Center locator, http://www.onkyousa.com/Support/servicecenterLocator.php?source=globalnav, if you have any other questions or concern please feel free to email me at askOnkyo@us.onkyo.com, Thanks, JT

Jul 13, 2015 | Onkyo TX-SR706 Receiver

1 Answer

No sound out of the pioneer vsx-1121-k


Hello,
Try removing all the speaker and the HDMI connections; then use a headphone to listen to music from the tuner or a CD in stereo mode. Better in direct mode. If you hear your music correctly the receiver could be working correctly. If no music is heard, you may need to have it repaired professionally.
If you can hear music, connect the main FL & FR speakers and verify you can hear music that way, without the headphone connected.
If you can hear music that way, connect the center and rears. Try a mode that uses all channels to verify all sound channels are working.
Then, and only then start adding your HDMI connections.
Good luck

Jan 19, 2015 | Pioneer Vsx-1121-k 7.1 Home Theater...

1 Answer

Speakers and headphones do not work


Sadly this could indicate that the main power amp has failed. You should try turning it up really loud with some music playing. If you can hear it very faint, then the main amp has failed. If you can hear hum, then the pre-amp might be the cause. The only other cause is that the headphone socket has broken, cutting off both speakers and headphones.

Aug 06, 2013 | Onkyo Audio Players & Recorders

1 Answer

Onkyo 545 one channel don't work


Use headphones or Computer Speakers
and plug in to your headphones jack.


If the audio is present on both channel , check your speaker system

or the jack circuits.


If symptoms are the same, follow the troubleshooting on the link

above.

Oct 09, 2012 | Onkyo TX-SV545 Receiver

1 Answer

Hi, I have a 3 year old Onkyo TX-SR506 receiver that I bought secondhand. The receiver can get very dusty so I was cleaning the top with a damp cloth while listening to music. Suddenly the music stopped...


I don't think its a harmless coincidence that it happened while you were touching it.

Assuming 'damp' means 'no dripping' I'd discount mositure as the cause. Was there something else you may have touched or caused to move during your actions, like speaker wires? Retrace your steps (with power off) and imagine what may have moved.

Disconnect the speaker wires at the receiver and see if that helps. If so, you just need to start adding speakers until it fails again or not, then isolate the cause if it is related to specific channel(s). If it doesn't come up 'naked' something cooked inside and a hands-on tech needs to get involved.

In the future - turn it off when manilpulating anything on, near or attached to it.

Jul 12, 2011 | Onkyo TX-SR506 Receiver

1 Answer

My onkyo tx-8222 suddenly stopped amplifying on both speakers and headphones. I can hear music faintly with the volume at max (just the pre-amp?). Time for a new amp?


Never use maximum volume for troubleshooting. The errant switch or control that you eventually find and flip will suddenly release the amp's full power and you'll destroy your speakers. If a signal isn't audible at 1/2 volume it's probably not there.

Look for a misplaced Mute or Tape Monitor control or Multichannel Analog Input selected.

There is a good chance that a common control may have developed a high-resistance or 'dead' spot through idleness and is causing your symptom. Turn the POWER OFF and operate every control throughout its range a number of times, especially rarely-used ones like Tape Monitors and the Mute control.


Turn the volume to something reasonable and see if that helped.

Feb 21, 2011 | Onkyo TX-8222 Receiver

1 Answer

Unable to use sumsung receiver /disc amplifier


Contact Onkyo website - usually a malfunction in the unit requiring service, and you cannot reset it. HOWEVER, try the usual unplug, wait and plug-in again. Make sure that there's not a shorted speaker - so unplug all speakers and try using just headphones. Also, make sure you have air ventilation around the unit - nothing on top of it, as that will cause it to overhead and shutdown. Try these items and report back. Good Luck!

Dec 29, 2009 | Onkyo TX-DS787 Receiver

1 Answer

How do I connect my outside speakers to play?


The onkyo should still have a speaker A/B selector in the menu.
Check on the back panel for speaker A/B.
If it has or you decide to use Zone 2 you will need to set the sound programme to "stereo" so the rears and centre do not work.
You can still use a digital source.
You should be able to display the amp's menu on the screen.
Hook up "monitor out" (Yellow) via RCA connector to one of the "A/V inputs" (yellow) on the tv, this will show you a display of the menu and will make it eaiser to navigate.

Jun 16, 2009 | Onkyo TX-SR705 Receiver

2 Answers

New home theater setup- no signal at tv using onkyo tx=sr605


Could well be the quality of your cables. if you have high end cables the consult a service agent. if you have the cables that came with the products, go and get some better ones.

Nov 04, 2007 | Onkyo TX-SR605 Receiver

Not finding what you are looking for?
Onkyo TX-8511 Receiver Logo

Related Topics:

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

Dennis McCollum

Level 2 Expert

137 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...