Question about Ricoh Aficio 1515MF All-In-One Laser Printer

2 Answers

Ricoh 1515MF Scanning

When I try to scan I get the following message displayed:

no destination is programmed for specified number

How do I program a destination number for this scanner?

Posted by on

2 Answers

Easier said than done...you'll probably need a tech for this one.
First..to scan to folder you require a software called "scanrouter Lite" from Ricoh, which is actually kind of hard to get a hold of these days, since it's nnot supported anymore, and then the configuration is not easy , because it is proprietary...meaning only Ricoh uses it, and it is almost impossible to configure for anyone else that has not used it.
There is however Scan to email, and for this you can open a web browser, and type it's Ip address (if you have it connected via tcp/ip port), enter "admin mode"...user name= "admin", password = "password"...then enter all network settings...IP, DNS, POP,SMTP, etc. then in "address book" enter your destination settings.
This is not a configuration that is easy for a novice either, and it is also not compatible with an email server that uses authentication for outgoing mail.
I may not have helped, b ut I hope I clarified.

Posted on Feb 27, 2009

  • Anonymous Feb 27, 2009

    It certainly doesn't violate any copyright laws....it was a free program. ...and why just make a copy and send it to "pillar" then?

  • Anonymous Feb 27, 2009

    There is in fact another option other than suggested, that I had never
    experimented with, until now -maybe this is how you had it configured
    originally. And it is much easier to configure for an end user, and
    that is the 'Network twain scanning" software.

    get it here:


    http://www.ricoh-usa.com/downloads/downl...



    With this, you can use your adobe Photoshop, or similar to select
    "File", "Import", then select your 1515 scanner...hope this helps

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have scanrouter lite on a CD, but I can't get it to work either. Please see my message below about error code 12320.

If I know I'm getting it back I can send it to you. I don't think that violates any sharing or copyright laws in light of the fact that it isn't supported any more. If it does, then sorry never mind.

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fax forword ricoh mp171


Print documents received and forward to a specified end receiver. This is useful if, for example, you are visiting another office and would like a copy of your documents to be sent to that office.
You can also specify a "folder" as the forwarding destination.
en-i_imp.gif
  • To use this function, set [Forwarding] under [Administrator Tools] to [On].
  • The Forwarding function does not forward documents received with Memory Lock.
  • You can select end receivers only from among destinations programmed in the Address Book. You cannot specify programmed transfer stations as end receivers.
A fax number, e-mail address, IP-Fax destination, and folder can be set as the forwarding destination.
When you wish to change the end receivers depending on the senders, specify the end receivers by the senders, at "Program Special Sender". Documents not received from specified senders are sent to the destination specified in this function. For details about programming special sender, see "Program Special Sender".
You can set whether or not to print the forwarded documents on this machine in "Parameter Setting" (switch 11, bit 6). See "Parameter Settings".
Deleting a destination specified as a forward destination from the destination list causes the settings of the forward destination to be deleted, so they must be registered again. When a destination is changed, a document is transmitted to the new destination. If there is no destination of the specified type, you can set which destination to be used as an alternative destination in "Parameter Setting" (switch 32, bit 0). See "Parameter Settings".
You can program one of the User Function keys with operations for this function. See "General Settings/Adjust".
If you have specified a folder for forwarding, you can specify the file format used for forwarding in "Parameter Setting" (switch 21, bit 3). See "Parameter Settings".
User Parameters (switch 37, bit 4) on the Fax Features menu allows you to include the sender's name in the names of files sent to folders. However, garbling of the file name and data loss can result if the receiver's operating system cannot accept certain characters in file names. To prevent this, use User Parameters (switch 37, bit 5) to limit the file names to plain characters only. If you limit file names to plain characters only but errors still occur, disable display of the sender's name in the file name of documents forwarded to folders. For details, see "Parameter Settings".
Using the parameter setting (switches 38 and 39), you can specify the maximum number of resends that the machine attempts if it fails to forward a fax (including faxes from special senders) to a folder destination, and the interval between the resend attempts.
en-i_ref.gif
or download the operations manual to guide you here ..http://support.ricoh.com/bb_v1oi/html/oi/re/model/mp171/mp171en.htm

Mar 24, 2013 | Ricoh Aficio Printers & Copiers

2 Answers

Destination list cannot be used now ricoh aficio c2800


If you are using an LDAP server to provide the destination, you may not have the Search Conditions programmed correctly.

Feb 27, 2012 | Ricoh Aficio 1515MF All-In-One Laser...

1 Answer

Multifuction hp laserjet 3050 conflict with hp laserjet M1522N


After installing the printer software you need to program scanning software.
Below are the steps to program scanning software:

To program the Scan To button:

Select Start/Programs or All Programs (Windows XP)/HP/HP Laserjet 3050, 3052, 3055, 3390, 3392/Scan
Click the Setup to open the Scan To Setup Wizard.
Select the Change the destinations that show up on the all-in-one control panel when I press the <Scan To> button and then click Next .
Check the Allow me to scan by pressing the Scan To button on the all-in-one check box.
Choose the destination by moving them from the PC window (the left window) to the All-in-one window (the right window).
NOTE: The All-in-one window might contain items set up by other computers that are connected to the all-in-one. You cannot make changes to these items.
Click Update .
To Create a destinations:
Follow steps 1-2 from the above steps.
Select Create a new destination with settings that I will specify and then select Next .
Select the Save it to my computer and then press Next .
Select the scan preferences and then select Next .
Select the scan destination folder and file format type and then select Next .
NOTE: If you wish to use a custom folder for your scan destination, you will need to create the folder prior to this setup wizard in order to browse to it.
Select the quality level you would like the file to be saved as.
Name the new destination on the computer, check the Send this new destination to the all-in-one check box, and enter a name for the display on the all-in-one. Then select Next .
Confirmation allows you to verify your settings. Select Save .
Once the new destination has been saved, the new destination will be configured as one of the Scan To destinations on the printer.

May 15, 2009 | HP LaserJet 3050 All-In-One Printer

1 Answer

All leds light on panel


After installing the printer software you need to program scanning software.
Below are the steps to program scanning software:

To program the Scan To button:

Select Start/Programs or All Programs (Windows XP)/HP/HP Laserjet 3050, 3052, 3055, 3390, 3392/Scan
Click the Setup to open the Scan To Setup Wizard.
Select the Change the destinations that show up on the all-in-one control panel when I press the <Scan To> button and then click Next .
Check the Allow me to scan by pressing the Scan To button on the all-in-one check box.
Choose the destination by moving them from the PC window (the left window) to the All-in-one window (the right window).
NOTE: The All-in-one window might contain items set up by other computers that are connected to the all-in-one. You cannot make changes to these items.
Click Update .
To Create a destinations:
Follow steps 1-2 from the above steps.
Select Create a new destination with settings that I will specify and then select Next .
Select the Save it to my computer and then press Next .
Select the scan preferences and then select Next .
Select the scan destination folder and file format type and then select Next .
NOTE: If you wish to use a custom folder for your scan destination, you will need to create the folder prior to this setup wizard in order to browse to it.
Select the quality level you would like the file to be saved as.
Name the new destination on the computer, check the Send this new destination to the all-in-one check box, and enter a name for the display on the all-in-one. Then select Next .
Confirmation allows you to verify your settings. Select Save .
Once the new destination has been saved, the new destination will be configured as one of the Scan To destinations on the printer.

Apr 27, 2009 | HP LaserJet 1300 Printer

1 Answer

When try to scan to email after the configuration was done,it displays message (sender has not been specified) And :Updating the destination the list has failed: also displays at button of MFP display...


at least one of the destinations in the copier address book has to be designated as a sender. or, set the "auto specify sender" to on, as long as their is an e-mail address programmed in the administrator e-mail address section.

as far as updating destination list failed. if you are using scanrouter, you need to make sure that an i/o device is set in the scanrouter program. if you are not running scanrouter, turn the delivery option (or delivery server) to off, in the file transfer section of your copier.

this should solve both problems.

Apr 01, 2009 | Ricoh Printers & Copiers

1 Answer

I have a HP LaserJet 3055. I bought it when I was using XP but I now have a new computer using Vista. I have downloaded and installed from HP the installation setup program for Vista - followed all the...


Hi,
As i understand that you u r able to print and copy fine which ensure that there is no issue with the connectivity and scanning device.
However next troubleshooting comes in picture is software as per you have mentioned that yoiu have downloaded and installed the complete software couple of times still the issue persists.
In that case we need to Programn Scan to option in the printer software and on your all in one.


HP LaserJet 3050, 3052, 3055, 3390 and 3392 AiO Printer series - How to Program the Scan To Button and Create New Destinations
Information
The Scan To button must be programmed before it can get used. However, some destinations are programmed by default if the all-in-one is directly connected to the computer.
Details
To program the Scan To button:
Select Start/Programs or All Programs (Windows XP)/HP/HP Laserjet 3050, 3052, 3055, 3390, 3392/Scan
Click the Setup to open the Scan To Setup Wizard.
Select the Change the destinations that show up on the all-in-one control panel when I press the <Scan To> button and then click Next .
Check the Allow me to scan by pressing the Scan To button on the all-in-one check box.
Choose the destination by moving them from the PC window (the left window) to the All-in-one window (the right window).
NOTE: The All-in-one window might contain items set up by other computers that are connected to the all-in-one. You cannot make changes to these items.
Click Update .
To Create a destinations:
Follow steps 1-2 from the above step
Select Create a new destination with settings that I will specify and then select Next .
Select the Save it to my computer and then press Next .
Select the scan preferences and then select Next .
Select the scan destination folder and file format type and then select Next .
NOTE: If you wish to use a custom folder for your scan destination, you will need to create the folder prior to this setup wizard in order to browse to it.
Select the quality level you would like the file to be saved as.
Name the new destination on the computer, check the Send this new destination to the all-in-one check box, and enter a name for the display on the all-in-one. Then select Next .
Confirmation allows you to verify your settings. Select Save .
Once the new destination has been saved, the new destination will be configured as one of the Scan To destinations on the printer.

Dec 21, 2008 | HP LaserJet 3055 All-In-One Printer

2 Answers

Printer shows offline/Scanner has no destination list


You must program the email addresses in the machine address book, so that you will have a destination list to scan to email.
You can also try to scan by pressing the Scanner button to access the scanner function and input the email address manually by selecting manual, and then press the Start button to scan the document.

Joe

Dec 18, 2008 | Ricoh Aficio 1515MF All-In-One Laser...

1 Answer

Scanning


This message will come up when you are scanning from the Stand alone printer not from the computer.

If the software is sucessfully installed in your computer,
Then you should have a icon which says HP Director / HP Solution Center (If not Goto> Start> All Programs> HP and then you will see them
Open HP Director/Solution Center and try scanning from there, It should scan from there.
If yes then go to settings> Scann Settings> Scan to setup> There you see an option which says Front panel Destination list> Click that and there you see a options says Restore Defaults> Click that> then Apply and Ok> And close all the indows and try scanning from the All-In-One.

If it does not work then try the steps bellow:

Go To:
My computer>C:windows>system32
Copy hpzipm12
minimize this window
Right click on Start button on the computer>Explore>Programs>Startup>edit>paste
minimize this window.
Go back to My computer>C:>windows>system32
Copy hpzinw12
minimize this window

Right click on Start button on the computer>Explore>Programs>Startup>edit>paste
Now you will see two new files in Startup
Now go to My Computer>C:Program Files>HP>Digital Imaging>bin>
Copy hpqtra08
close this window
Right click on Start button on the computer>Explore>Programs>Startup>edit>paste
Restart the computer
Open Hp Solution Center> Settings>Scan settings and preferences> Scan to button>
check destination list> if available applications are not in the destination list then add them in the front panel destination
Tried to scan.

Sep 10, 2008 | HP Officejet 5610 All-In-One InkJet...

2 Answers

HP Officejet Pro L7580


scotti444 ,

hi! try this solution for your problem.tnx

Follow these steps to correct the problem:

  1. Open the HP Director/Solution Center software.
  2. Click Settings , click Scan Settings and Preferences , and then click Scan To....Setup . The Button Settings window will appear.
  3. The Destination List tab should be visible. The software will scan the computer and determine what scan capable programs are installed on the computer. These will be listed on the left side.
  4. Select a program you wish to scan to and then click Add to move it to the right side. Programs listed on the right will be available as scanning destinations when pressing the Scan button.
    Figure 1: Destination tab of the Button Settings
fe4bcd2.jpg

5. On the Scan To Button tab, you may also specify what type of scan you wish to launch from the front panel and establish a default scan resolution and color depth setting.

6. Click OK to save the changes and exit the setting.

Causes:
>This error message occurs if the Scan To settings have never been set.

hope this can help you resolved your problem

regards,
coffeebeans

Mar 15, 2008 | HP Officejet Pro L7580 All-In-One InkJet...

Not finding what you are looking for?
Ricoh Aficio 1515MF All-In-One Laser Printer Logo

4,529 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Printers & Copiers Experts

quennie732

Level 2 Expert

393 Answers

Bernard D'Souza

Level 2 Expert

161 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

181 Answers

Are you a Ricoh Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...