Question about Logitech Cordless Mouse

1 Answer

No communication between mouse and computer. Keyboard is working

Mouse is an infrared device, with a USB tranciever.

Posted by on

  • Anonymous Feb 27, 2009

    usb is pluged in and mouse is on not worken

  • Anonymous Mar 06, 2009

    well the thing is ive resyncded it and done evertything u said but like it just keeps on like turning of and i have to resync it on and on

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 239 Answers

First check the batteries. then try resyncing the mouse with the receiver. you do this by holding the button on the receiver until a light starts flashing and then press the button on the bottom of the mouse. oh yeh don't forget to check that the power switch on the bottom of the mouse is turned on. make sure that there isn't a power switch on the usb receiver also.

Posted on Mar 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How does B180 wireless mouse works


A wireless keyboard is a computer keyboard that allows the user to communicate with computers, tablets, or laptops with the help of radio frequency (RF), infrared (IR) or Bluetooth technology. It is common for wireless keyboards available these days to be accompanied by a wireless mouse. Wireless keyboard

Oct 21, 2015 | Keyboards & Mice

1 Answer

Cannot get mouse to work


1.
If the underside of the mouse has an on/off switch, make sure to set the switch to the "On" position.
2.
Restart the computer. This can resolve the problem, at least temporarily, so that other troubleshooting steps can be applied.
3.
Move the mouse or keyboard closer to the receiver
The receiver is the hardware that receives the wireless signals from the keyboard and mouse and communicates the data to the computer. Most receivers connect to a USB port, either directly or by a cable, but a few types of receivers connect to the PS/2 ports.
. Make sure that the keyboard and the mouse are within 100 centimeters (39 inches) of the receiver. If the receiver is attached to a cord, position it so that it is on the same level surface, close to the mouse and keyboard.

4. Replace the batteries with a fresh set of alkaline batteries and make sure they are correctly installed. If the mouse or keyboard is not working, then replace the batteries, even if the mouse/keyboard software indicate the batteries still have a charge.
Remove the battery cover to access the batteries. For keyboards, the battery access cover is found on the underside of the keyboard. When replacing the batteries look for the positive symbol (a plus sign +) imprinted near the battery compartment or battery cover. Make sure the positive end of the battery is oriented to the positive side of the compartment.

5.
If you have a USB receiver, unplug the USB receiver, wait 10 seconds, and then insert it into another USB port - preferably into a USB port that is closer to the mouse and keyboard. For example, if the USB receiver was plugged into a USB port on the back of the computer, unplug it and plug it into a front USB port.
6.
Resync the wireless keyboard and mouse connections.

Resync the keyboard and mouse connections for receivers with a connect button .
Resynchronizing the keyboard and/or mouse causes the devices to reconnect to the receiver using new identification numbers.
NOTE: The following connection sequence must be completed within 60 seconds. If the sequence is not done in 60 seconds, start over.

Sep 10, 2010 | HP Wireless Optical Mouse

1 Answer

Hello, i currently use a IBM desktop with IBM keyboard and mouse but i just bought a microsoft wireless keyboard and mouse which i just installed into my desktop using the installation CD. They are both...


Hi Tony,
It appears that you have an IBM desktop whose BIOS isn't capable of booting off of a USB keyboard and mouse device. Older computers used to require that a PS2 mouse and keyboard be attached before booting, to prevent you from booting a machine without any way of controlling it. You have 3 options:

1. leave the corded mouse and keyboard attached and never use them
2. update the BIOS for your desktop to the newest one in hopes that the updated BIOS will allow for USB mouse and keyboard operation
3. go to a computer store and get a PS2 to USB converter/adapter. They're small and relatively inexpensive. It plugs into the PS2 port, and makes your computer think that there's a PS2 device connected, when it's actually a USB device.

Mar 03, 2010 | Microsoft Wireless Laser Mouse 6000 v2.0

1 Answer

I have a Dell bluetooth keyboard and mouse that I bought with my Dell Inspiron notebook - I now want to use with my new Sony Vaio notebook but the Vaio does not seem to be able to see the keyboard and...


The mouse and keyboard to not communicate directly with a computer, but with a small USB device plugged into the computer. Remove that device from the Dell and plug it into the Sony. But you also have to go through the resynch sequence.

Jan 13, 2010 | Dell Wireless Keyboard Optical Mouse w0147

1 Answer

No mice work on my computer!I installed a wireless mouse, and now no mice work, the wireless, and normal keyboard does. How do I fix the mouse socket?


if it is PS2 then you need to reboot your computer in order for the computer to detect the PS2 device ( the PS2 device needs to be plugged in before rebooting )

If USB then try a different USB port and also check bios settings to ensure all usb keyboard and usb mice settings are all enabled.

You could go into device manager and delete usb hub etc and let windows re detect and re install otherwise go to

http://www.usbman.com/WinME%20USB%20Guide.htm


His site has lots of other useful info

May 10, 2009 | Socket Communications Standard Keyboard...

2 Answers

Cannot connect wireless keyboard and mouse


I am assuming that this is an INFRA-RED device, with
plug and play capability.

1) Make sure that the infra-red port is turned ON on your PC,
in the BIOS and in Windows (using control panel)

2) Make sure that the infrared driver is working:

My Computer ==> Right Click ==> Properties ==>
Hardware ==> Device manager ==> ....

Find the Infra-red device and check its status.

Some laptops have a mechanical switch witch controls all
wireless ports. If you shut-off the Wi-Fi, the blue-tooth and
the infra-red will also be disabled.

3) Check for tiny reset buttons on the keyboard, mouse and
the receiver. Press them repeatedly.

4) If the device is communicating, and infra-red ICON
should appear on you taskbar (RHS).

Right click the icon and make sure you enable IR
communications AND plug and play.

5) Make sure you have installed any drivers that came with
the keyboard, if any.

6) Again, make sure that infra-red communications are enabled
in the control panel.

5) Failing that, it is possible that the keyboard is defective,
or the infra-red port on your laptop is NFG, it would not
be the first time.

6) You may want to take your keyboard to a computer
shop, and ask the staff the try it with a different PC.

Alternately, try a different keyboard with the laptop.

Martin

May 07, 2008 | Keyboards & Mice

1 Answer

Set up of a Microsoft wireless keyboard & mouse


The devices probably came with a USB cable and a receiver, or just a USB equiped receiver, that you need to plug into your computer. Go ahead and plug the cable and receiver into the computer so that your wireless mouse and keyboard has a means to communicate with the computer. Next, Here is a website address where you can download drivers for your mouse and keyboard. You must first choose either mouse or keyboard, then the exact product and model, then the operating system, and finally the language. repeat the process for the other device (mouse or keyboard, whichever you did not choose first). Good Luck! And let me know if there are any further problems.

http://www.microsoft.com/hardware/mouseandkeyboard/Download.mspx

May 05, 2008 | Microsoft Wireless Laser Desktop 4000...

1 Answer

Wireless keyboard


wireless keyboards and in wireless mouse devices, use the following methods in the order that they appear in.

Method 1: Try different ports loadTOCNode(2, 'moreinformation'); Warning If you have to change a PS/2 connection, shut off the computer, make the changes, and then restart the computer. Do not plug a PS/2 device in the PS/2 port while the computer is running.

To determine whether the problem is related to the ports on the computer, use only the two cables that are included with the wireless desktop receiver, or the single cable that is included with a mouse.
USB keyboard and USB mouse loadTOCNode(3, 'moreinformation'); If the USB cable is currently connected to a USB hub, disconnect the device from the hub, and then connect it to a USB port on the computer. If your device is already connected to a USB port on the computer, try to connect the device to a different USB port if one is available.

Note Only one USB connection to the computer is required, even if your device has two USB plugs. If the problem persists, disconnect other USB devices and connect only the USB plug from the receiver to a USB port on the computer.
PS/2 devices loadTOCNode(3, 'moreinformation'); If your devices are connected to PS/2 ports on the computer, verify that you have the following configurations: • Verify that the USB plug for your mouse is connected to the green USB-to-PS/2 adapter and that this adapter is plugged in the mouse PS/2 port on the computer. The mouse PS/2 port on the computer may also be green. If you are not sure which PS/2 port is the mouse PS/2 port, see the documentation that came with the computer. • Verify that the USB plug for the keyboard is connected to the purple USB-to-PS/2 adapter and that this adapter is plugged in the keyboard PS/2 port on the computer. The keyboard PS/2 port on the computer may also be purple. If you are not sure which PS/2 port is the keyboard PS/2 port, see the documentation that came with the computer.If you have to change your configuration, shut off the computer, make the changes, and then restart the computer. If your mouse or keyboard has both USB and PS/2 connections, try using the other connection.
PS/2 keyboard and USB mouse loadTOCNode(3, 'moreinformation'); Verify that the USB mouse is plugged in a USB port on the computer and that the purple keyboard PS/2 plug is connected to the purple PS/2 port on the computer. If you have to change the PS/2 connection, shut off the computer, make the changes, and then restart the computer.

Method 2: Install fresh batteries loadTOCNode(2, 'moreinformation'); Both the wireless keyboard and the wireless mouse rely on AA alkaline batteries for power. If the problem persists, install a fresh set of batteries in the device that you are experiencing problems with.

Method 3: Resynchronize your device to the receiver loadTOCNode(2, 'moreinformation'); To resynchronize the mouse or keyboard to the receiver, follow these steps.

Note When you synchronize the mouse or the keyboard with the receiver, put the device near the receiver and put other wireless keyboards and mouse more than six feet away. 1. Press the button on the receiver, and then verify that the light on the receiver starts to blink. 2. If a dialog box appears on the screen in several seconds, follow the instructions that appear on the screen.

Otherwise, go to the next step. 3. Press and release the Connect Channel button on the bottom of your mouse or keyboard. 4. Check the green light on the receiver. A steady green light means the synchronization was successful. If the problem persists, try steps 1 through 4 again.

Clean the mouse lens loadTOCNode(2, 'moreinformation'); This problem may occur if you are using an optical or laser mouse and the lens on the mouse is dirty. To clean the lens of an optical or laser mouse, follow these steps: 1. Use a dry cloth to clean the bottom surface of the mouse. 2. Check to see whether the mouse functions correctly. 3. If you see dust on the bottom of the mouse, use a can of pressurized de-ionized air to blow away the dust on the lens. 4. Check to see whether the mouse functions correctly. 5. If the pressurized air canister is not available, blow dry air on the lenses by using your mouth one or two times. 6. Check to see whether the mouse functions correctly. 7. If these steps do not resolve the problem, use a cotton bud to clean the lens without scratching it.

Mar 02, 2008 | Sakar 62150 Keyboard

2 Answers

Wireless keyboard & mouse not working


First download and run regscrub xp and ccleaner to clean up your system then try uninstalling and reinstalling the logitech setpoint software and try the keyboard and mouse again. Let me know if this works. 

Oct 23, 2007 | Logitech Wireless Access Duo Optical...

Not finding what you are looking for?
Logitech Cordless Mouse Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Keyboards & Mice Experts

micky dee

Level 3 Expert

2624 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Logitech Keyboard and Mice Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...