Question about Computers & Internet

2 Answers

My Icebox Flipscreen Computer/TV/DVd/CD/Radio won't turn on...

...since I disconnected it from the outlet to paint the walls. I re-connected it and have power, as the switch in the back lights up when I turn it on but have no LED light in the front. There isn't a reset button available either. Please help me fix this or help me find someone who is qualified and can get parts if necessary. I'm hoping there is a small fuse inside that can be replaced, but I'm not qualified to disassemble. Applica Comsumer Products has refused to help saying they only service this product if it's less than a year old and have no solution. They will (and I quote) ''cannot supply parts if it is older than I year as they need them for newer customers''.  Need help desperately!! Chris in Los Angeles, Ca.

Posted by on

  • 1 more comment 
  • yeahnay1998 Mar 09, 2009

    When I tried to plug in my Icebox the light is orange and It hums VERY Loudly, But does nothing else. I have no idea what to do.

  • smoldove May 05, 2009

    I have the same problem, have unplugged from the wall and now will not turn on. I can't find any info how to fix, if anybody has any suggestions please let me know.

  • Lee Connolly May 11, 2010

    Sounds like a power supply issue. Can you give me any details on the power supply. I'll try to find a replacement. A model number or anything for the power supply or the PC.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 21 Answers

I had the same problem with my unit. Amber light was on and humming sound comming from speakers. Motherboard had to be repaired by ICEBOX dealer that sold me my unit.
Their website is www.lordantech.com

Posted on May 24, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem as yeahnay1998. I was watching the TV one minute and then I heard a loud humming noise. The screen changed to "searching", the LED light is now orange. I disconnected everything and then let it rest. When I started everything up again later...nothing but loud humming and dark screen. I mainly used it for TV, but was able to use internet when I needed it. Does anyone know what I should do next?
jwinch

Posted on Mar 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony Bravia built in DVD player wont accept the discs - why is this?


Performing a power reset
1. Turn off the television.
2. Unplug the television power cord from the electrical outlet.
3. Let the television remain without power for 60 seconds.
4. Plug the power cord back into the electrical outlet.
NOTE: If the television is plugged into a power strip or surge protector, remove it from the power strip or surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television.
5. Turn on the television.
How to establish an HDMI connection between a TV and other device.
Follow the steps below if the HDMI® connection between your TV and other device is not working:
1. Make sure both the TV and other device are turned on.
2. While turned on, unplug the power cords for the TV and device from the electrical outlet.
3. Disconnect the HDMI cables from the TV and other product.
4. Wait 60 seconds.
5. While the HDMI cables are disconnected, plug the power cords back into the electrical outlet.
6. Turn on the TV.
7. Re-connect the HDMI cables.
8. Turn on the HDMI-connected product.

The TV should now detect the HDMI signal from the connected device and operate normally. If there is still a problem, disconnect the HDMI cable from both products and then reconnect it in the opposite direction. In some situations this has been reported to resolve connection issues.
How to reset a TV to factory settings: https://us.en.kb.sony.com/app/answers/detail/a_id/61396
Hopefully this post helps you! If does, please mark it "accept as solution"

Aug 20, 2017 | Sony Televison & Video

1 Answer

I have a 55" Panasonic flat screen that won't turn


Try disconnecting all of your HDMI cables and plugging the power cord of the TV into another wall outlet. If this resolves the issue, you may have had a small power surge from either your wall outlet or one of your source devices. It is recommended to connect your TV to a surge protector if you haven't done so already.

Sep 29, 2013 | Televison & Video

1 Answer

My 32inch lcd tv keeps flickering it started all the sudden


TRY THIS

    • 1 Turn the TV off with the front-mounted power button, not the remote. Unplug the TV's power cord from the wall outlet. Let an hour pass before plugging the cord back into the wall outlet. Turn the TV back on with the front-mounted power button and wait until it has fully restarted. Bring up a TV channel to see if the image being presented on the LCD screen is no longer flickering. A momentary power surge can cause the circuitry inside the LG-brand LCD TV to function erratically.
    • 2 Unplug the video cable from the video connection on the back or side panel of the LG TV. If more than one video cable is connected to the TV, disconnect all of them. Disconnect the other end of the video cable from the video source device that it's attached to -- a DVD or Blu-ray player, or a satellite receiver or cable box. Blow off the connections on the video source device and on the back or side panel of the TV with bursts of compressed air. Reinsert one end of the video cable into the video source device and the other end into the video input that it was connected to. Turn the TV back on with is remote to see if the picture is now free of flickering. A loose or partially connected video cable can cause the LCD TV's screen to flicker when presenting an image.
    • 3 Turn the TV off and unplug its power cord from the wall outlet. Place a power conditioner next to the wall outlet. Plug the power conditioner's power cord into the wall outlet. Plug the TV's power cord into one of the AC sockets on the power conditioner. Turn the power conditioner on. Turn the TV on to see if the picture is now free of flickering. The RF signals in the electric line that the LG TV is drawing power from can cause flicking through interference patterns being generated.

Oct 20, 2012 | Computers & Internet

1 Answer

Sylvania 730SVD flat screen with built in dvd... Can't eject dvd inside and when turned on the digital words show up and keep flashing black gray green red... The remote won't even work..


Try resetting the TV by disconnecting it from the mains outlet for 1/2 hour, then connect to the main outlet and switch on the TV.

Feb 03, 2012 | Televison & Video

1 Answer

My icebox fs04 flipscreen


I was able to fins a new IceBox on ebay, but cannot locate a way to upgrade browser software. If someone finds a solution, please share

Nov 30, 2011 | IceBox CT04 12 in. TV/DVD Combo

1 Answer

Replacing HP 7580 all in one scanner fax with HP 7590 all in one scanner fax. I did not have install CD for 7590 so downloaded drivers from HP site. Error message keeps saying that does not recognize...


Hi,

first Step - Try another USB Cable.. If this does not solve, try the steps below.

Power off the Printer
Disconnect the USB Cable from Printer to PC ( from PC )
Disconnect the power cord of printer frmo wall outlet

Power off the PC
Disconnect the Power cable from back of PC and from wall outlet as well
wait for 10 minutes

Connect the PC power cables to PC and Turn on the PC
When you login to your Desktop, Turn on the Printer
Connect the Cable,

It should get recognised.


Regards,
Ron

Feb 22, 2011 | HP Computers & Internet

2 Answers

My icebox fs04 flipscreen will not power on or off.


I have the exact same problem. Let me know if you find anything.

I am going to try to change the power supply with in the box

Regards
Sam
latifs@gmail.com

Nov 19, 2009 | IceBox CT04 12 in. TV/DVD Combo

1 Answer

The sound stopped working on my koss KS2503. Yesterday everything worked perfectly fine. Today there is no sound. Everything else seems to work. I checked all the connections and have had no success. Is...


unplugg your tuner from the AC wall outlet then check the setting on the tuner do not try to watch and listen to the tv only try to listen to the radio or a CD and select the right option on the tuner to do so. If you have sound on any of the functions....radio or CD/MP3 then the problem lies on the setting not correct for the TV/VCR/DVD mode.

Sep 12, 2009 | Koss KS2503 System

1 Answer

Wireless connect for icebox v3.0


I have no power light comng on when I try to turn on the icebox computer... can anyone tell me any company that could try to diagnose and fix this as it is only 1.2 years old

Jan 12, 2009 | IceBox CT04 12 in. TV/DVD Combo

1 Answer

Kenwood 606 receiver


disconnecting the tv from the audio connections on your amp may have created a powersurge in the audio input selector IC. Try powering down the amp at the wall completely for 5 mins and turn it on again. Check to see if operation has returned. If not then it may need an audio selector chip replaced.

This problem can be caused when connecting or disconnecting rca connectors from non earthed equipment like TV and VCRs, By the nature of this type of connector, it will spike the input line by connecting with voltages floating often over 100volts.

to avert this problem occurring, wire all the equipment up and with aerial disconnected and tv / vcr turned off at the wall socket. Turn the equipment power on at the wall last thing.

Dec 14, 2007 | Kenwood VR-6060 6.1 Channels Receiver

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

704 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...