Question about Netopia (3347NWG-ENT) Router (3347NWGENT)

1 Answer

My website on my network open the netopia router page

I have AT&T static IP for my server using a netopia model 3347-02
My websites is working perfect on the net, but when I try to open my websites on my second computer connected on this router on my intranet, the page is coming up is the netopia router login.
My external is IP 99.169.131.102 and my server is using 99.169.131.97
Someone have a clue, what I have to do to open my websites on my intranet network ?
Thanks

Posted by on

  • 3 more comments 
  • Silva Neto Feb 26, 2009

    I have 5 static IP.

    I called AT&T and they setup my router to connect with them. They came here 2 times. Can't help-me.

    I called the Motorola Netopia support (very bad support) and they tell me to setup different than AT&T. I don't know who's right.

    My server is running, the websites is working on the net. Try: www.mywebmessages.com.

    But, when I type this address on my network, or on my server, or on my computer connected on this router, I just receive a netopia page login asking for username and password. After enter this info, the page come up is netopia router setup page.

    Internally, the domain name is not resolving the DNS I think.

    Some ideia ? Thank you very much.

  • Silva Neto Mar 10, 2009

    Hi,

    We are using a Dell power edge 1900 server runing win2003 standard edition.

    We are using just netopia router.

    The IP to access the router is: 99.169.131.102 instead default netopia IP: 192.168.1.254
    This IP was provided by AT&T they installed this way.

    I have another computer connected on this router, I am able to see all websites on the internet, but when I try to open one of my websites hosted on my server I receive the window asking for username and password. When I enter with the info, (router password) the page who came up is the netopia setup page, instead my website.

  • Eric Lanning May 11, 2010

    Also, what kind of server are you using?



    Is it providing DNS, DHCP of any kind to any other computers?

  • Eric Lanning May 11, 2010

    Oh. That is totally different then. The issue is not the netopia at all.



    Well it is and it isn't. But before I get into why it is and isn't.


    Is there a local router connected to the netopia? or are you only using the netopia?

  • Eric Lanning May 11, 2010

    Hello. Netopia routers are tricky to configure if you are not familiar with them.



    How many computers in total are on your network?



    I would recommend calling AT&T and having them walk you through it over the phone or possibly having a tech come out to do it for you. Adjusting settings in your router which you either don't have written down, or are not familiar with could disable your internet entirely.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 37 Answers

You need to somehow setup the internal DNS to route all requests for the specific domain name, to your internal website.

Or, setup the netopia to allow loopback connections.

If you have a 2003 Server OS, chances are that the server is handling DNS requests, at least internally.

This tutorial has a good example of how to create domains internally:
http://www.simongibson.com/intranet/dns2003/

Just a couple of tidbits when using this approach:
You will essentially be controlling the DNS for the domain internally anyways. Meaning, any subdomains, mail exchangers etc., for the domain will have to be configured as well.

Good Luck.

Posted on Mar 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Conect webcams on a local network to a website


I presume that you mean "from a web site" that the web site is hosted somewhere out on the greater internet.... The problem that you are encountering is probably related to NAT (Network address translation). The "In" side of a router, is typically a "private network" there are pre-assigned number groups for these - a common one is in the 192.168.x.x range. Problem is that the "outside" of your Netopia router will be dependent on your ISP< and unless you are paying them extra for a static IP address, is likely to change every time you reboot - or sometimes they bump them every 24 hours. So, first thing is get a dynamic DNS Entry - www.dyndns.org is one supplier - I think you can get one address for free from them, pay for more.. YOu set up something like CMVideo.dynsdns.org on their site, and set up dyndns support in the netopia router... Then you want to open the specific port on your router, to go to the internal IP Address of your camera. (YOu mention Multiple Cameras - depends on the Camera you may have to go for multiple dyndns (one for each...) ).

I am a little confused/concerned about the second router "tier" - if you have the Belkin configure as an Access Point only, all good, if you are trying to run it as a router behind a router, it will probably never work - double nat-ting" is a no no with most consumer Routers. Simple solution is to tap from Netopia lan side to Belkin Lan side (rather than Belkin Wan Side)

Nov 14, 2013 | Netopia Routers

1 Answer

How do i forward a port i want to play call of duty black ops but i cant find an online game, the game website says to forward these ports, TCP [80] UDP [88, 3074, 22728, 33233] but i dont know how to...


http://www.netopia.com/support/hardware/technotes/NQG_025.html
Server List (Port Forwarding) NQG_025 With NAT enabled, the IP addresses of nodes on your LAN are private since they are hidden from the Internet. IP Servers let you pass specific types of network traffic through the Netopia router's NAT interfaces. Once configured, selected types of network traffic, such as FTP requests or HTTP (Web) connections, will be forwarded to a specific host or server behind the Netopia router. Please Note: From the LAN (Local Area Network), you will also be able to access the servers that are responding to requests from the internet, but only using the internal private IP address. Access via the public IP address is not supported from a local ethernet connection. If your ISP is routing you multiple public IP addresses, you can also configure the router to forward all ports in one public IP to a designated private IP address on your LAN via Easy PAT List entries. For those instructions, see Quick Guide NQG_024: IP Mapping (Address Forwarding).
Please Note: If your router is currently running Netopia Residential Firmware with a web "GUI" configuration menu, this technote is not applicable to you. Most 3300 Series Netopia Gateways can be upgraded to Enterprise level firmware. Click Here! to purchase the upgrade key.
Related documents: NQG_039 NAT and the Basic Firewall
Firmware References:
  • v8.2 R1 (and up) - 3300 Enterprise Series
  • v5.3.7 (and up) - 4000 Series
  • v4.8.2 (and up) - R-Series

Before You Start
Telnet into the Netopia router's Main Menu at 192.168.1.1 (if using the default IP setting). If your network has a different IP addressing scheme, modify this accordingly. Click Here! for instructions on using telnet and Hyperterminal (serial connection).
Login with the user name and password. The Superuser login is required to save changes. If you are unsure of this, contact your network administrator.
Don't forget to press the Enter key to save any entries. Hitting the back space, delete or tab without first hitting enter will undo any changes.
The Esc key will take you back towards the main menu screen.
Once you have completed your configuration, you should reboot the Netopia to save and apply your changes.

home_telnet.gif
The Netopia Main Menu Interface

Server List Configuration

  1. From the Main Menu of router console screens, go to Quick Menus, and select Network Address Translation.
  2. Select Show/Change Server List.
  3. Select Easy-Servers.
  4. From the Show/Change NAT Server List screen, select Add Server.
  5. Select Service and the service and port you want to allow. If your service and port are not available in the pull-down menu, select Other. Selecting Other will allow you to enter a specific service port or a range of ports since fields are provided for both a First Port Number and a Last Port Number. To allow a specific service port, the First Port Number and Last Port Number should be the same. Select Okay.
  6. Next, enter the Server Private IP Address, or the private IP address of the host/server you are forwarding the service to, and the Public IP Address you want to associate with the same host/server. This value can be left set to 0.0.0.0 if you are using the WAN IP as the Public IP address. Note: If your ISP is routing you multiple static IP addresses, other then the one used for Internet access, you may create more than one server for specific service as long as all servers have a different Public IP Address specified. For example, with two web servers on your LAN you would need to create two Server List entries for TCP 80 (www-http). Since each specific port (service) can only be mapped once using any given Public IP Address, a distinct public address must be used for each TCP 80 server list entry. It is not necessary for you to specify more than one Local WAN IP Address or Public IP Address in your router's configuration. As long as you are connecting to your ISP via a public IP address used for NAT, they are responsible for routing all other IP addresses via that connection.

Conclusion
You have now configured your router for TCP/UDP port forwarding. If you have a switched connection (ISDN or Analog), you will need to either disconnect and reconnect your Internet connection, or restart your router for the Nat Server List changes to take effect. If you wish to filter traffic for your static IP mappings, please see the following Netopia Technote:
NQG_039: NAT and the Basic Firewall

Nov 12, 2010 | Netopia CAYMAN 3387W-ENT CABLE/DSL...

1 Answer

Where would i find the static ip adress


Static Ips are the ones that you yourself will define in your every computer in your network. Also, you need to configure your router to use static IP. So, 2 things to remember.

Setting your router for Static IP.
  1. Open your router web interface at http://192.168.1.1 or http://192.168.0.1 (depending on your router model)
  2. Disable the DHCP server by un-checking this DHCP option.
  3. Save your changed settings.
Configuring Static IP of computers.(This applies to MS Windows XP only)
  1. Click Start => Settings => Network Connections
  2. Right click on your LAN Connection and click "Properties".
  3. On the General Tab, scroll down to TCP/IP, Click on it to select and click the "Properties" button.
  4. Make sure that you ticked the option button: "Use the following IP Address" and you need to define the IP.
25a8e0d.jpg

Mar 05, 2010 | Routers

1 Answer

Print server for vista, D-link DI-704p


I can recomend to your network setup is WPS54GU2
Wireless-G PrintServer for USB 2.0
******************************** Before configuring the wireless settings of the printserver, make sure to know the following settings on your D-link router: SSID, and wireless security.
Configuring the Wireless Settings on the Printserver
The wireless settings of the printserver can be configured using its web-based utility. Make sure the printserver is set to a static IP on the network.
NOTE: Make sure the printserver is already working when hardwired to the Dlink router before attempting to use it wirelessly on your network.
Step 1:
Access the printserver’s web-based setup page. Open a web-browser such as Internet Explorer.
NOTE: If you're using Mac, use Safari to access the printserver's web-based setup page.
Step 2:
Go to the address bar and enter the IP address you've assigned to the PrintServer.
NOTE: To assign the PrintServer a static IP address, click here.
Step 3:
When the printserver setup page appears, click Wireless.


Aug 01, 2009 | D-Link DI-704P Router

1 Answer

Need to forward to static ip


access your modem i belive the ip address is
192168.0.1
if not then run an (ipconfig) on ur command prompt
use the default gateway on ur address bar
by default the username and password are both (admin)
if you set ur own up then im sure u know what it is
go inthe modem click on
(advanced) then on (ip static routes) and type in information that should take care of it !

rate my service please
july
thanx

Apr 20, 2009 | Netopia (3347NWG-ENT) Router (3347NWGENT)

1 Answer

VPN connection - Client cannot connect


Hi mwells960

Theres alot of differnet things i could ask you, but im going to assume you're jsut setting up a basic VPN. That means that somebody is telecommuting to work and wants to hit the server at work.

That means you have a static ip at work, and your at home workers has whatever, a internet connection lets say. Im thinking DSL with ATT since its a netopia 3347N.

If the netopia has a gui interface, you cant vpn thru it. Its not a VPN router. Its a residential router that you're trying to make do too much.

The sad news is, you can't upgrade it to an Enterprise having firmware router anymore, netopia use to offer that, but when Motorolla bought them out last year, they did away with that nice little feature. For true VPN'ing with a router, first, go get a VPN router to start with.

Most people accomplish what you are doing by putting the netopia in to bridegemode, and then putting a VPN router like a linksys behind it.

spin

.

Apr 15, 2009 | Netopia (3347NWG-ENT) Router (3347NWGENT)

1 Answer

Port Forwarding not working on Port 80 from our website


The best way to test this is to forward it to a test webpage on another PC or server first to make sure it is working correctly, before trying the unix/linux php server.

In my experience external addresses do not work internally, unless you have your ISP allocate you moe than one external static ip

Please post your results, the provider and whether you already have multiple static ip addresses purchased

Feb 09, 2009 | NetGear RangeMax WPN824 Router

1 Answer

Netopia router to strict


you need to open ports on your router so that it will give you proper connection to your ps3. you also need to set static ip address on your ps3.

here are the steps...

- go to a working computer that is wired to the router and open command prompt (for windows, click on start, then run, then type cmd or command, whichever will work, or click here if you are using mac)
- then you will be prompted with a black screen, on the blinking cursor type ipconfig/all
- take note of the subnet mask, default gateway, dns1 and dns2
- now go to your ps3 to set static ip adddress
* go to network settings and click network settings
* go to wireless or wired (whichever connection you are using for your ps3)
* then custom
* enter security settings
* now for your ip info click manual
* where it says ip address enter a static ip address (by default the ip address of your router is 192.168.1.254 so you can use any ip address that is on the same segment and was not being used by your other devices like 192.168.1.5 or 192.168.1.10
* subnet mask is normally 255.255.255.0
* put your default gateway number (the one that you have seen and listed from the command prompt) on the default router field
* enter the dns1 and dns2 also
* click next
* don't enable proxy server
* you can enable upnp if you can also enable it in your router

- now go bak to the computer and open a web browser, on the address bar of your web browser type the default gateway number (usually it's 192.168.1.254)
- you will be prompted with the netopia page, click expert modem on the left hand column, click yes, enter expert mode
- double click the word configure, go down and click on NAT, click static NAT, click the dropdown icon, see if your ip address (static ip address of your ps3) is there, if so click it, click on done, if this works, ignore the paragraph in brackets. (note: if it's asking for the default router ip address, you need to select/enter the default gateway number)
- click define custom service, click o port forwarding, select next , type anything in the service name, something that you will know its related to the ps3
- for global port range, if it's only one port that's being entered, enter the same port in the left and right hand boxes, in every case , enter the lower port in the box below saying base port even if there's only one port, and chage the TCP/UDP settings according to every port.
* here are the ports (note: repeat the same process for each one, after that window, select the static ip address you made in the drop-down list so it gets forwarded only for the ps3)
TCP port 80
TCP port 443
TCP port 5223
UDP port 3478-3479
UDP port 3658-3659

- when your done, click NAT on the left hand side, click the dropdown menu that has age of empires written on it and scroll to the bottom, click on the ports you made with the asterix beside them (*) and click enable , then enter the ps3 ip address in the bar , to enable them just for the ps3
- now click configure on the left and then click connection and tick the box that says upnp (note: you should have, when you click NAT on the left hand column, a static NAT address, enabled, it should be the same ip that you have used on your ps3, 7 ps3 ports, all enabled to the host device of your ps3's ip
- now , enter basic mode, click firewall, and set to low, this isn't dangerous as long as you have a desktop firewall such as windows or mcafee etc...
- save changes, and restart your router

hope this'll help you

ciao!





Aug 26, 2008 | Netopia 2247NWG-VGx Wireless Router...

1 Answer

N.A.T Settings


So you want the public IP address that your Netopia router is getting to do a 1 to 1 NAT to the private IP address 192.168.1.136? Basically you want to bypass any of the firewall restrictions of the router?

The caveat with this configuration is that if you don't have any other public IP addresses for the actual Netopia router to use then all other devices on your network will now longer be able to access the internet through the router. Only if you have a public IP address that you can assign the router will it be able provide NAT and internet access to the rest of your network.

The 192.168.1.0 network is not routable on the public network. You need your entire network to NAT through your router using a public IP address.

You configuration will work if the Netopia router will allow a 1 to 1 NAT to another node on the network and allow NAT'ing for the rest of your private network concurrently. Of course you need at least (2) public IP addresses in the same subnet as well.

Hope this helps. Let me know if you need better clarification.

MO

May 24, 2008 | Netopia ADSL 2+ MODEM 10/100 EN AND USB...

2 Answers

First packet in connection is not a SYN packet:


Verizon blocks port 80 traffic to residential customers. If you want to host a website, they expect you to pay for the business service and a static IP.

I am monkeying around with my DNS records on goDaddy to see if I can get http traffic to go to port 8080 instead of port 80. So far, I have not had any success.

I did find no-ip.com, which, for $25/year, will "host" a simple redirect for you, so that when people type in http://yourdomain.com, it actually gets redirected to http://yourdomain.com:8080. That :8080 does show up in the address bar, but I think that's okay. Especially for $25/year.

Nov 08, 2007 | Actiontec (5GE583000-01) Router

Not finding what you are looking for?
Netopia (3347NWG-ENT) Router (3347NWGENT) Logo

Related Topics:

790 people viewed this question

Ask a Question

Usually answered in minutes!

Top Netopia Routers Experts

Douglas  Erikson
Douglas Erikson

Level 2 Expert

62 Answers

Ed Mac

Level 3 Expert

709 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a Netopia Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...