Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

1 Answer

LA5558XSN0 Washer ExLarge Rinse Cycle doesn't engage

I inherited a washer from a rental, Whirlpool Model LA5558XSN0, SN: 093844970, year unknown. When the tenant runs a loan on Extra Large, the water continues to fill up and drain (like its doing it at the same time) but no engage an actual rinse cycle. When she switches it back to Med Load, it engages just fine and runs properly. What do you think the problem might be? Also, I was unable to find an owners manual for this model so I could see if parts were still available for it.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Whirlpool Master
  • 2,651 Answers

Sounds like adrain line issue, your creatring a syphoning effect . id assume thedrain line is either real low, perhaps running across thefloor or is screwed tightly to a longer hose ejecting through a wall with a full dry well

Posted on Mar 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does it beep through the entire. Wash cycle. No code showing.


Whirlpool Duet GHW9150P Front Load Washer Beeping ...

www.fixya.com > ... > Whirlpool Duet GHW9150P Front Load Washer
Question about Whirlpool duet Washing Machines ... my front loader is not workingwhirlpool washer flashes and beeps will not finish a cycle 1 Beep/E10--Error: Water... It beeps through the wash and rinse cycle every couple of minutes. ... Cycle signal which tells you that the cycle is complete beeps through the entire cycle.

[PDF]front-loading automatic washer use and care ... - Whirlpool

www.whirlpool.com/.../U...

Translate this page Whirlpool Home AppliancesWash. This is the main portion of the wash cycle. You will see the washer tumble the load. ... Spin cycle. If the laundry is still wet, take half of the load out of the washer and try again. .... Using recommended AFFRESH® washer cleaner, add.

[PDF]DISHWASHER USER INSTRUCTIONS - Whirlpool

https://www.whirlpool.co...

Translate this page Whirlpool Home AppliancesThe first cycle using the sensor will run longer to calibrate the optical sensor. Rinse Aid. Using rinse aid will optimize your drying and wash performance. This dishwasher is ...... laundry detergent, hand soap, or dish detergent for hand washing .... models) you will experience more starts and stops throughout the entire cycle.

Continuous Beeping - Whirlpool Duet Sport Washer - The ...

appliantology.org > ... > The Laundry Appliance Repair Forum

Jan 25, 2016 | Whirlpool Washing Machines

1 Answer

Whirlpool washer, model # LSQ9010PG rinse cycle problem. Does not extract all water from clothes. Some cycles work fine but, some do not; leaving water in the clothes.


This is a direct drive washer. It is easy to repair. You may have a transmission problem or possibly a bad timer. The machine is well worth the effort to repair it as you will see in my video it is fairly easy to repair. I recently worked on my brothers washer and made a video of the repair. Service manual and repair pix
He attempted to fix it but gave in to his wife and went and got a new fangled one. I inherited his old one and am reserving it for when his new one goes down. Believe me it will.
This video shows you what is involved in repairing the washer. Their are many videos on youtube that will help you:

Aug 13, 2012 | Whirlpool Washing Machines

1 Answer

Whirlpool model WTW5310VQO


i've found problems with the temp. switch on this washer part number W10184148 and it's around 40 dollars,also on the rinse cycle the washer only uses cold water.what happens when you use just the hot?i had a lady that her water would start to fill and then the water would stop and the pipes in the house would start making a banging sound.if you order the part from http://www.repairclinic.com/PartDetail/Switch/W10184148/1468990 repair clinic and if this isn't your problem which i think it is from how you discribe it you can send the part back and get your money back for up to a year.good luck with your washer and next time you buy something and it doesn't work right get right on it

Mar 14, 2012 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool ingis washer will not engage rinse cycle


make shure the cold water is on and also if it worked before then it cold be two parts 1 the timer is bad or 2 the water inlet valve

Jan 17, 2009 | Whirlpool Inglis IP4400 Washer

1 Answer

HELP PLEASE


you need to check the pump you may have something stuck inside look there first

Mar 28, 2008 | Whirlpool Estate TAWS750PQ 27-Inch Washer

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...