Question about Casio Parts Cash Register PC Desktop

1 Answer

Casio TE 2200 Needs mac codes

The machine wasnt initalising so I totally cleared it so I'm getting nothing now on the keyboard

Posted by on

  • 7 more comments 
  • Tyrone Davis
    Tyrone Davis Feb 27, 2009

    The machine wasn't inatilizing so I press receipt while turning to programme mode then sub total......when try to do anything I get an e 004........I tried pressing journal while turning machine to programme mode then 10801. but that didnt work

  • Tyrone Davis
    Tyrone Davis Feb 27, 2009

    VER: 4207

    LABEL: AAOAAA

    VER: 4258

    LABEL: AAOKAB

    FC: EB080000080002

  • Tyrone Davis
    Tyrone Davis Mar 01, 2009

    Not sure how o do a full ram clear....



    1 Day Month Year.

    2 No pin # log on

    3 No Bar Code Scanner just a plane simple machine



    It actually never used just trying to set it up

  • Tyrone Davis
    Tyrone Davis Mar 01, 2009

    Day Month Year

    No pin # log on

    No bar code scanner



    Just trying to set up the machine...It was never used

  • Tyrone Davis
    Tyrone Davis Mar 02, 2009

    Ok I still have a problem.....I have a CO1 on the display I can enter a figure in the dept but cant finalise it...the sub total or the cash amt/tend is not working

  • Tyrone Davis
    Tyrone Davis Mar 02, 2009

    The only keys that work on the keyboard is the numeric keys jnl and receipt keys....if you press the other keys they would beep but the not registering

  • Tyrone Davis
    Tyrone Davis Mar 03, 2009

    If you press 1 then the dept it registers and print on the receipt but nothing happens if you press cash or subtl or any other key

  • Tyrone Davis
    Tyrone Davis Mar 03, 2009

    Yes all the keys are in the same position....none of them are working not even the help key

  • mouse647Mous Mar 25, 2009

    Where do you find MAC codes?
    How do you put them in?

    Casio TE2200



×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 737 Answers

Hi.
What MAC code did you use? Are you getting an error on the display? Please describe what you have done so far and I'll try to help.

Mark

Posted on Feb 26, 2009

  • 5 more comments 
  • flexion1
    flexion1 Feb 27, 2009

    Right. When you did a flag clear (receipt feed then subtotal),
    did it print out a receipt? If so, what is the code next to 'INIT' on the receipt?


  • flexion1
    flexion1 Mar 01, 2009

    Ok.
    You will have to fully RAM clear it and start from scratch.

    I need you to answer these questions, then I can generate a MAC code for you:

    1. Is your date format day/month/year, or month/day/year?

    2. Do you need your staff members to log on to the machine with a PIN number when they want to operate it?

    3. Does the machine have a bar code scanner attached?

    Please answer these three questions, and I'll help you out.

    Mark


  • flexion1
    flexion1 Mar 02, 2009

    Just do the initialisation the same way you did before (jnl feed), but you can't use the old MAC codes on these machines. Use code 12520. When you hear the double beep, press subtotal again.

    The machine should now be ready for programming.


  • flexion1
    flexion1 Mar 02, 2009

    That's strange. It will usually be able to work as a simple register straight away. remember that the keyboard will be setup as default now, so make sure your CASH button is in the same position as the layout in the manual. also try using other payment methods, eg credit

  • flexion1
    flexion1 Mar 02, 2009

    So, if you turn key to REG mode, press 1 on the numeric pad, then a department, then CASH, how far does it get?

  • flexion1
    flexion1 Mar 03, 2009

    Ok. It still sounds like the payment keys have been shifted. Do the payment keys look like they are in the same position as the ones in the book?

  • flexion1
    flexion1 Mar 04, 2009

    In that case, it sounds like you have a fault in this machine. I can't think of any reason why the payment methods won't work straight after a RAM clear. I suspect the keyboard has problems. It might pay you to get it checked over by a dealer.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I delete cash regester history on Casio te-2200


You use Z reports. There are many different codes for Z reports depending upon the data you need to reset. The only thing you cant reset is the grand total which prevents fraud. Check the codes in your book. If you need manuals, one of the users has them here:

https://the-checkout-tech.com/manuals/cashregisters/Casio6.php

Apr 01, 2015 | Retail Supplies

1 Answer

How can I print subtotal on the receipt on my Casio TE-2200 cash register?


go to print options and select print subtotal ,press 1 and save&exit

Oct 12, 2014 | Casio TE-2200 Cash Register

2 Answers

How can I add bottom messages on the client bill on my Casio TE-2200 cash register?


First you must turn on the bottom message printing

program 3

address 2122

set D6 to 3

Bottom Message word programming

LINE 1 address 0932
LINE 2 address 1032
LINE 3 address 1132
LINE 4 address 1232


Oct 12, 2014 | Casio TE-2200 Cash Register

2 Answers

How do I program my Casio TE-2200?


I would go to the specialist support forum at
http://www.eposwizard.co.uk/

Jan 18, 2014 | Casio TE-2200 Cash Register

1 Answer

I want ONLY to clear buffer of TE-2200 without chaning anything else [i.e. logo, dept. key...] many thanks


unplug with key in program and press receipt feed while reconnecting power. should get all f's in display. then subtotal will clear the buffer only.

Aug 14, 2013 | Casio TE-2200 Cash Register

1 Answer

Factory Settings


Turn you machine to P2 and while pressing RF button , swich on the mains and press sub/total

Mar 06, 2013 | Casio TE-4500F Electronic Management Cash...

Not finding what you are looking for?
Casio Parts Cash Register PC Desktop Logo

Related Topics:

379 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Retail Supplies Experts

Electroboy
Electroboy

Level 3 Expert

1534 Answers

tomferryman

Level 1 Expert

42 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18334 Answers

Are you a Casio Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...