E00 Means the red magnetic key (the one on the string) is not inserted.. If it is then the magnetic switch may be faulty.
E01 Is an electrical fault - the wire that runs inside the frame is probably crushed while assembling
E02 Means the motor is not running - either burnt out, stuck or the optic device is not functioning correctly.
This are what I found out by trial and error - hope its useful to someone - I'm looking for a copy of the manual for this thread-mill if anyone could send me a scan or photos of the pages - thanks very much.
SOURCE: want to buy a treadmill within 8000 .want a manual
If you want to sell your treadmill this is not the forum to do so. You would have better luck in your local area to do this. Good Luck to you
SOURCE: operating manual for body science treadmil
GO TO THIS WEBSITE:
http://manualsfactory.com
http://fitness.manualsonline.com
http://pdfservicemanual.com
www.iconservice.com
www.fitnessrepairparts.com
give your model, etc, and download, most of them are free, other they charge some fee.
sincerely.
E.CUADRA
MANAGUA, NICARAGUA
SOURCE: instructions for davina mccall treadmill 335-7963
go and download : www.fitness.manualsonline.com or www.iconservice.com
God bless you
730 views
Usually answered in minutes!
×