Question about Snom 320 IP Phone

1 Answer

Visual basic Is there any way to integrate my phone into visual basic to 'read' the caller ID and notify me if the call has been picked up? Thanks in advance

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 46 Answers

The standard comm port (which the modem is connected to ) can be read by code. The callerId info would be in the buffer of the call.
This page has some code for doing that:
http://www.yes-tele.com/modem.html
As for telling if it is picked up, you would have to poll the modem for the ATH command that says the line is "off hook".

Posted on Aug 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Outgoing caller id


Must be done in the controller. 3300 is CPN substitution. 5000 is Calling party number. Telco must except the service. Not sure of what I said? Contact your dealer. This is not something you set up from your phone.

Mar 17, 2014 | Mitel 5330 IP Phone

1 Answer

Does it do call masking


Yes, press the feature button and then enter 889. This will restrict the NBX system from sending out your Caller ID information for all calls. You will have to disable this by doing the same thing if you want to get your outbound caller ID back. Feature 890 will restrict the NBX system from sending out your Caller ID information for this call only.

Mar 11, 2014 | 3Com NBX V3000 IP Phone

1 Answer

We cannot get the 504g will not broadcast its caller ID. it only shows 'restricted'. why won't it display correctly.


change the configuration in your IP Phone change the setting to allow broadcast caller ID .

May 12, 2011 | Cisco SPA504G IP Phone

1 Answer

Our caller ID has stopped working and this has nothing to do with our monthly ATnT service


The caller ID facility is an optional facility provided by your Operator and this needs to be activated from operator side in order to show in customer's Called ID device.
Please check it with any other line that has the same facility activated.

Jan 21, 2010 | Nortel Business Series Terminal T7208 -...

1 Answer

Polycom SE225: my verizon line provide caller id does not displa


Due to the age of the SoundPoint Pro, it some of its features are not compatible with newer phonesystems, such as CableVision. There are no software updates for the SoundPoint Pro, and as long as the Caller ID is enabled there are no other settings or adjustments that can be made to workaround these kind of problems unfortunately. I recommend contacting your service provider to see what kind of caller ID signaling they are using; most likely they will be using a newer digital system, or MDMF which is not backwards compatible with SDMF or earlier CID receivers.

Dec 05, 2009 | Polycom SoundPoint IP 501 IP Phone

1 Answer

Caller ID not displayed


check the settings on the PBX , Caller ID has to be set -up correctly on the PBX , ie T1 needs to be configured to pass the caller ID to the PBX and to the phone

Mar 16, 2009 | Avaya 4610SW IP Phone

1 Answer

Cannot forward call


You need to create a call group for transfering. Secondly, you need to configure the caller id within the fxo module.

Dec 25, 2008 | Cisco 7940 IP Phone

1 Answer

Avaya 5610 double display on incoming caller ID


Did you get this fixed. I would double check the firmware files of the phone. And maybe reset it.

Oct 10, 2007 | Avaya 5610 IP Phone

2 Answers

For incoming calls, the caller cannot hear me for 2-10 seconds after I pick up


You've got an IP issue somewhere in your setup. It sounds like the call is being lost and then the phone is querying the DNS server to find out where it should be looking for the call. Do you have a VOIP server name or it's IP address in the setup? Are you using DHCP or manually assigning IP addresses? If the VOIP server is not on a static IP, I would fix that first. Post back here the answers and we can look at it further.

Aug 04, 2006 | Polycom SoundPoint IP 501 IP Phone

Not finding what you are looking for?

Open Questions:

0 Answers

Cannot dial out on an SNOM320 SIP Phone I have forwarded the ip address of the phone through the router as a DMZ. I can call out using the software on my computer without any issues but not using the phone. Here is the log file information: System Information: Phone Type: snom320-SIP MAC-Address: 0004132C7E7D IP-Address: 192.168.1.101 Firmware-Version: snom320-SIP 8.7.3.19 Firmware-URL: http://provisioning.snom.com:80/download/fw/snom320-8.7.3.19-SIP-f.bin Production Information: Mac:0004132C7E7D;Version:Standard;Hardware:snom320 (H: R2A);Date:25/06/08;Copyright(C) snom technology AG Uptime: 0 days, 0 hours, 1 minutes LCS: 0 days, 0 hours, 0 minutes (0) Memfree: 1580 K CPU: 0.03 0.01 0.00 1/10 10 Bootloader-Version: 1.1.3-u Expansion Module: (0) SIP Identity Status: Identity 1 Status: 12262898960@voip.freephoneline.ca: OK Identity 2 Status: Identity 3 Status: Identity 4 Status: Identity 5 Status: Identity 6 Status: Identity 7 Status: Identity 8 Status: Identity 9 Status: Identity 10 Status: Identity 11 Status: Identity 12 Status: Ethernet Status: Net Port: Connection Type: 100 Mbit Full Duplex Status: connected PC Port: Connection Type: Status: not connected Call being received by Snom320: 9/2/2013 11:28:08 [NOTICE] PHN: RTP: set_destination adr=208.85.216.38:11468 Call being placed by Snom320: 9/2/2013 11:28:08 [NOTICE] PHN: RTP: set_destination adr=208.85.216.38:11468 9/2/2013 11:28:36 [NOTICE] PHN: TPL: Socket 31 idle/connect timeout 9/2/2013 11:29:01 [NOTICE] PHN: SDP: Skipped Codec G723 is not supported for 20 ms packets 9/2/2013 11:29:02 [WARN ] PHN: SIP: process_registrar_packet: 401 needs 128 bit nonce 9/2/2013 11:29:02 [NOTICE] PHN: SIP: process auth:Match challenge for user=12262898960, realm=voip.freephoneline.ca 9/2/2013 11:29:22 [NOTICE] PHN: TPL: Socket 32 idle/connect timeout 9/2/2013 11:29:34 [ERROR ] PHN: SIP: transaction_timeout udp: 1000018 (32000) 9/2/2013 11:29:34 [ERROR ] PHN: SIP: transport error: 1000018 -> udp:208.65.240.170:5060 9/2/2013 11:29:34 [NOTICE] PHN: SIP: Add dirty host: udp:208.65.240.170:5060 (0 sec) 9/2/2013 11:29:34 [NOTICE] PHN: SIP: final transport error: 1000018 -> udp:208.65.240.170:5060 9/2/2013 11:29:35 [ERROR ] PHN: SIP: transport error 1000018: generating fake 599 9/2/2013 11:29:37 [NOTICE] PHN: Fetching URL: snom://mb_exit 9/2/2013 11:30:35 [NOTICE] LID: testNetworkPolicyIsSet This has been frustrating me for a long time and I would appreciate any suggestions. Thanks.

Feb 09, 2013 | Snom 320 IP Phone

See all Snom 320 IP Phone Questions

Snom 320 IP Phone Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Snom IP Phones Experts

NBX_Tech
NBX_Tech

Level 1 Expert

58 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Snom IP Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...