Question about InFocus ScreenPlay 4800 Multimedia Projector

3 Answers

Problem running power point with embedded video file on projector

I have one slide in my PPT presentation that contains video. I am running the show over an InFocus projector. The PPT plays well on the laptop, but over the projector the video file, which is actually a box that covers about 1/4 of the screen, overtakes the entire projector screen and then runs in a choppy fashion, until it finally freezes the screen and then you have to escape out of the whole show to restart. Any info on how to fix would be much appreciated. Thank you.

Posted by on

  • Sachin
    Sachin May 11, 2010

    Have you connected your laptop and projector with a VGA Cable? If yes,then please go to the presentation mode of your laptop and set the resolution for display 2.

    Alternatively, you can point the cursor anywhere on your desktop and rightclick. You will open a display properties box, go to settings and reduce the resolution for Display 2.



    You problems seems to be a display issue. let me know

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Hi,
I too got the same problem once.But some how i had managed to solve it.Actually it is due to the corrupted header of the ppt file i.e the system can read ppt location of the memory but unable to reach the video file .The solution is you just need a powerpoint 2007 file recovery tool.The tool i used is provided here.Why i am recommending the tool is it makes a copy of the ppt and then repairs it .so there wont be any further damage.The demo version is here.If satisfied with demo reach the full version of it as i did ...

Posted on Jan 24, 2013

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

It may be your ppt files are corrupted. To repair the corrupted ppt files you can use powerpoint repair software. It makes use of the advanced algorithms to repair the corrupted ppt files. It provides very simple interface.

Posted on Feb 10, 2010

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I try to solve what is the problem in ur ppt video presentation.I think u need to reinstall ur software again or try to reinstall windows what u used now or try just to repair only.May be ur software corrupted too.

Posted on Jun 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I forward the slides of a powerpoint presentation using the remote?


Make sure that you connect a cable (usually the USB cable is supplied with the projector ) from the computer to the projector. Once communication is established, normal PPT slide advancing is done by pressing the up/down arrow keys (depending on the remote control layout)

Dec 18, 2013 | Epson Projector Remote Controller...

1 Answer

I've had this Optoma PK102 for about year and am not able to get desired results! What cable do I need to connect my Optoma PK102 and Apple ITouch. I have 2 Problems. Problem 1- I am unable to view...


Hi,

Welcome to Fixya. You need to put the file on the projector for you to view the PPT presentation.


ezrahite_63.jpg
You need to connect a USB cable shown on the image below. If you don't have the cable i suggest you purchase on just bring the projector to a store to have a compatible usb cable.


ezrahite_64.jpg

Use the link below for the manual and more info about the product.

Manual

Specification

Thanks for using Fixya

Mar 13, 2011 | Optoma Multimedia Projectors

1 Answer

My dell d630 laptop wont recognize my infocus lp70+ remote control and I can't advance my powerpoint slides with the remote control


Here's what the User's Manual says:


Using the Remote Control

To advance PowerPoint slides with the projector's remote, you

must connect the USB cable on the projector's computer cable to

the computer. See page 8 for more information.

Point the remote control at the projection screen or at the front or

rear of the projector (not at the computer). The range for optimum

operation is about 30 feet. If you point the remote at the

projection screen, the distance to the screen and back to the projector

must be less than or equal to 30 feet. For best results, point

the remote directly at the projector.


If you are displaying presentations in Microsoft® PowerPoint®,

you can use the remote's Previous and Next buttons to navigate

through your presentation while in Slide Show mode.

Jan 26, 2011 | InFocus LP70+ Multimedia Projector

1 Answer

My dell d630 won't recognize the infocus lp70+ remote control and I can't advance my power point slides?


Here's what the User's Manual says:


Using the Remote Control

To advance PowerPoint slides with the projector's remote, you

must connect the USB cable on the projector's computer cable to

the computer. See page 8 for more information.

Point the remote control at the projection screen or at the front or

rear of the projector (not at the computer). The range for optimum

operation is about 30 feet. If you point the remote at the

projection screen, the distance to the screen and back to the projector

must be less than or equal to 30 feet. For best results, point

the remote directly at the projector.


If you are displaying presentations in Microsoft® PowerPoint®,

you can use the remote's Previous and Next buttons to navigate

through your presentation while in Slide Show mode.

Jan 26, 2011 | InFocus LP70+ Multimedia Projector

2 Answers

Our DLP 1200mp projects a yellow back ground no matter what the colour of the ppt. slide.


try to replace your vga cable. if this problem occur again get help to your technician, maybe this problem is in the glasses inside of your projector.

Oct 28, 2009 | Dell 2400MP DLP Projector

1 Answer

Changing of slides during P.Point presentation


why not get a wireless mouse? you can get them for power point presentations ;-)

Oct 09, 2009 | 3M X75 Multimedia Projector

1 Answer

Multi Media Projector Problem


Open power point first, open full screen and proceed. Do not double click on the file.

In the explorer window, you can change the .ppt association away from the easy worship tool and restor it to power point. This will open .ppt files with power point.

Good luck

Apr 08, 2009 | Hitachi CP-S240 Multimedia Projector

3 Answers

Powerpoint video problem


Does the videos play well in Windows Media Player? If not, it deciates that there are not proper codec installed on your computer.Try to download and install some new codec from official: http://www.microsoft.com/windows/windowsmedia/forpros/format/codecdownload.aspx. Go for codec references at: http://www.codecguide.com/

If the video plays well, please try the following methods:
Method 1.
1. Put video files and the PowerPoint presentation in a same folder.
2. Re-insert these files to PowerPoint presentation.
Method 2.
Insert -> Hyperlink, choose the video file you want to insert, and then click ok. After do this, you can click the hyperlink to view the video when present the slide show.

Method 3.
 1. Display the slide you want to insert video.
 2. Click the View menu in the menu bar, and then choose Toolbars in its child menu, later Control Toolbox to let Control Toolbox displayed. Choose More Controls which seems like hammer.
 3. In the succeeding dialog box, choose Shockwave Flash Object. Your cursor will change into a cross-hair - draw a rectangle anywhere on screen
4. Right click the inserted Shockwave Flash control, and then click Properties.
5. Click the Movie property > type the full drive path in the value column (the blank cell next to Movie), including the file name (e.g. C:a.swf) or URL (e.g. http://www.a.com/b.swf)
6. To make the Flash play automatically when the slide is displayed, set the Playing property to True;
7. Finally close the Properties window and save your presentation.
Method 4.
Convert your PowerPoint presentation to Flash use some third party presentation tools, PowerPoint to Flash converter, for instance.

BTW, the link: http://www.playsforcertain.com/tutorial.htm may help you.

Nov 04, 2008 | HP VP6121 Multimedia Projector

1 Answer

Epson projector from computer & powerpoint


You need a wireless presentation remote that has a transmitter that plugs in to the back of the computer. This can be used to advance the slides. Make sure you get one that states the distance you need.

Let me know if that helps.

-Jeff

Aug 23, 2008 | Epson - PowerLite S1+ Multimedia Projector

Not finding what you are looking for?
InFocus ScreenPlay 4800 Multimedia Projector Logo

550 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Multimedia Projectors Experts

Juan Carlos Pacheco

Level 1 Expert

36 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Are you an InFocus Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...