Question about Acer TravelMate 4200 Notebook

3 Answers

Acer Travelmate 4220-4124

Cannot install printer. Error message problem with installer for Image. Contact hardware vendor for assistance

Posted by on

  • Anonymous Feb 26, 2009

    I tried with two copies of the disc, same result. When try to add printer from add printer control panel I get operation could not be completed message. The printer is a plug-n-play HP 7310 All in one. I finds the hardware but will not allow software installation. Message says "windows could not load the installer for Image. Contact hardware vendor for assistance."

  • RescueTechLA
    RescueTechLA May 11, 2010

    How are you trying to install this printer?

    With a cd?

    What OS are you using?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Always install the software first before connecting the printer. Then connect the printer, and power it on. If you had the printer connected beforehand, try to remove drivers and start from the beginning.

Posted on Feb 11, 2010

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Try to get your printer driver from internet,usually im using this site http://www.printcountry.com but there you have to register unfortunately.But it helps me always,just install the driver and then reboot your computer.It should help to solve the problem

Posted on Feb 11, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 63 Answers

Sounds like your printer cd installation disc is damaged or corrupt try going to the printer manufacturers website and download you printer driver and software direct from there website

Posted on Feb 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My acer aspire one d150 netbook webcam is missing . went to device manager and imaging display is missing . can anyone help with this problem?


Camera is not detected, there are several possibilities:

The first possibility
There was an error installing the driver. AOD150, manufactured by three types of cameras, chicony, liteon, suyin. Example: I installed the camera driver, suyin to AOD150. At the time of installation, a message appears, hardware not found / not detected / not recognize. This means, suyin not the right driver.

Solution

1. Open link driver AOD150
2. Operating System = Microsoft Windows XP Home Edition x32
3. Download software = Hardware Vendor Detection Utility
4. Double-click = HWVendorDetection.exe. We will find the right camera hardware.
5.
Download and install the Liteon driver

11_26_2011_6_53_41_pm.jpg

11_26_2011_6_54_05_pm.jpg

The second possibility
If the hardware vendor detection utility, does not detect camera

Solution 1
(assuming, normal hardware)
1. Possible corrupt operating system.
2. Reinstall the operating system, by doing format drive C.
3. Move all data from drive C to D/E/F.
4. Download drivers AOD150, and other applications, save it on drive D/E/F
5. Insert the Windows CD bootable. Perform boot from CD.
6. Press enter - F8 - New Installation - format the C drive, etc.
7. After the OS install is complete, install all drivers (chipset, LAN, VGA, sound, camera, etc)

Solution 2 (assuming, damage hardware)
Contact Acer Support

I hope this information useful, thank you.

Nov 24, 2011 | Acer Computers & Internet

1 Answer

Please give me any solution to stop 49 FF05 printer error


1. Press CANCEL JOB to clear the print job from the printer memory.
2. Turn the printer off, and then turn the printer on again.
3. Go to http:www.hp.com/
support/lj2420.
Click Download Drivers and Software. Check for the latest firmware image version at the bottom of the page. If this firmware image is newer than the one installed on the printer and the printer can receive a firmware update, download the newer firmware upgrade. Not all printer models can receive firmware upgrades.
4. Try printing a job from a different software program. If the job prints, go back to the first program and try printing a different file. If the message appears only with a certain software program or print job, contact the software vendor for assistance.

Aug 30, 2011 | HP LaserJet 2420 Printer

1 Answer

Error code 490665 van HP Laserjet 2420


49.XXXXX ERROR
alternates with
To continue turn off then on

A critical firmware error has occurred.

1. Press CANCEL JOB to clear the
print job from the printer
memory.
2. Turn the printer off, and then
turn the printer on again.
3. Go to http: www.hp.com/
support/lj2420.
Click Download Drivers and
Software. Check for the
latest firmware image version
at the bottom of the page. If
this firmware image is newer
than the one installed on the
printer and the printer can
receive a firmware update,
download the newer firmware
upgrade. Not all printer
models can receive firmware
upgrades.
4. Try printing a job from a
different software program. If
the job prints, go back to the
first program and try printing a
different file. If the message
appears only with a certain
software program or print job,
contact the software vendor
for assistance.

If the message persists, try this:


1. After performing the actions
listed in the preceding item, if
the message persists when
using different software
programs and attempting
specific print jobs, disconnect
all cables that connect the
printer to the network or a
computer.
2. Turn the printer off.
3. Remove all memory DIMMs
or third-party DIMMs from the
printer. (Do not remove the
firmware DIMM in slot J1.)
4. Remove all of the
EIO devices from the printer.
5. Turn the printer on.
6. If the error message
disappears, reinstall
each DIMM and EIO device
individually, making sure to
turn the printer off and then
on again as you install each
device. To replace a DIMM,
see.
7. Replace the DIMM or
EIO device that caused the
error message.
8. Remember to reconnect all of
the cables that connect the
printer to the network or
computer.
9. If this error message persists,
replace the firmware DIMM.
10. Replace the formatter

Jul 11, 2011 | HP LaserJet 2420 Printer

1 Answer

49,4c18 error


49.XXXXX ERROR
A critical firmware error has occurred.
1. Turn the device off and then on.
2. Try to determine whether the error occurs intermittently, while printing, or when turning on the device.
3. If the error appears while printing, determine whether it occurs when printing from a specific computer, a specific application, or a specific file. If all other computers, applications, or files
can print without the error, then the problem may be only within one print job or computer. Make sure the computer has the most current printer drivers, or use a generic printer driver.
4. Go to www.hp.com/support/LJP3005. Click Download Drivers and Software. Check for the latest firmware image version at the bottom of the page. If this firmware image is newer than the
one installed on the device and the device can receive a firmware update, download the newer firmware upgrade.
Try printing a job from a different software program. If the job prints, go back to the first program and try printing a different file. If the message appears only with a certain software program or print job, contact the software vendor for assistance.
6. If the message persists, contact your HP Support.

Feb 22, 2011 | HP LaserJet P3005n Printer

1 Answer

When itry to install my laptop samsung r60 plus


I checked the manufacturer's web-site:

http://www.samsung.com/ca/support/download/supportDownMain.do

and did not find an 'R60' model of laptop.

Access that web-site, and enter the correct model-number,
and download the device-driver for your hardware.

Or, if it is a brand-new laptop, take it back to the retail store,
and ask them for assistance -- they took your money, and they should support you.

Nov 24, 2009 | Sony Computers & Internet

1 Answer

Acer travelmate 290 error


Use another Bootable Disk Operating System to see it as may be the same problem you have. I think it's your Installer Disk have a problem.
From this problem it's windows system failure to show display appearance normally.
At least you try just one installing another Bootable Disk.
Good luck!

Sep 23, 2009 | Acer TravelMate 290 Notebook

1 Answer

Error code 49.4c18


49.XXXXX ERROR
A critical firmware error has occurred.

Turn the device off and then on.
2. Try to determine whether the error
occurs intermittently, while printing, or
when turning on the device.
3. If the error appears while printing,
determine whether it occurs when
printing from a specific computer, a
specific application, or a specific file. If
all other computers, applications, or files
can print without the error, then the
problem may be only within one print job
or computer. Make sure the computer
has the most current printer drivers, or
use a generic printer driver.
4. Go to www.hp.com/support/LJP3005.
Click Download Drivers and
Software. Check for the latest firmware
image version at the bottom of the page.
If this firmware image is newer than the
one installed on the device and the
device can receive a firmware update,
download the newer firmware upgrade.
5. Try printing a job from a different
software program. If the job prints, go
back to the first program and try printing
a different file. If the message appears
only with a certain software program or
print job, contact the software vendor for
assistance.
6. If the message persists, contact
HP Support.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

May 21, 2009 | HP Office Equipment & Supplies

1 Answer

I recently bought a HNC model CTGJD2028 3D Optical USB Plug and Play Mouse for my Compac Deskpro EN running XP Pro. Plugged mouse into usb port. Get a Popup Bubble – Found New Hardware – Mouse. Message...


UPDATE YOUR WINDOWS SOFTWARE FROM MICROSOFT OR YOUR VENDORS SITE, THERE MAY BE MORE SOFTWARE PATCHES FROM THE VENDOR TO FIX THAT TYPE OF PROBLEM

Aug 11, 2008 | Computers & Internet

1 Answer

Ive installed xp on my acer travelmate 4100 laptop


hello!

-- who is your internet service provider
-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

you may try this and see if this help solve your problem

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings
Step 7: test the Internet connection.

Apr 22, 2008 | Acer D-Link 2.4GHz Wireless Router 802.11b...

1 Answer

Problem loading win XP-SP2


Don;t know if this is the cause of u're errors, but it might be do to the motherboard chipset drivers (the lack of them in u're windows version). If so, u have to make a copy of u're windows cd with all u're motherboard drivers included, and try to install with that cd. The same problem appears to all new laptops that do not offer XP support and only Vista support . In order to do the new XP cd, u\ll need a little program that u'l find on internet..... (for example: n-lite)

Jan 18, 2008 | ASUS A8N-SLI Deluxe Motherboard

Not finding what you are looking for?
Acer TravelMate 4200 Notebook Logo

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18377 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

533 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...