Question about InFocus LP280 Projector, Factory Refurbished Multimedia Projector

1 Answer

Infocus LP280 projector will shutdown itself

Will use it for 10-30 minutes. Then it will get very hot, and it will shutdown itself. You need to power it on to make it work. After 3 to 4 retries, you will need to plug it off to make it work.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 167 Answers

The Lamp cooling fan is not working or the fan speed control chip/circuit has failed. Do not run the projector until it is repaired as this condition rapidly destroys the lamp!! If the cause of the problem is simply the fan itself. It can quite easily be acquired and replaced by someone who is electro-mechanically savvy.

If the problem is on the main board (also very possible) it is substantially more difficult to repair and should only be done by someone who is an order of magnitude above just electro-mechanically savvy.
Also if the problem is in fact the main board an authorized service center would just replace it!
(hang on to your wallet)



Cheers

Posted on Jan 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The bulb dont turn on


Projector Lamp Life and Brightness - Projector Reviews

www.projectorreviews.com/articles-guides/lamp-life-and-brightness-2/
Feb 26, 2015 - There are still a number of 2000 hours at full power projector still on the... brighter, like projector Y, but Y just doesn't have the picture quality.".

Resetting Lamp Hours on a Sharp Projector - Spiceworks

https://community.spiceworks.com/.../2235-resetting-lamp-hours-on-a-sh...
Jun 12, 2011 - However, once you change the lamp the projector still won't turn on ...If it still doesn't work then there is some other problem with the projector.

How to Repair InFocus Projector Power Issue (LP290 ...

? 1:56
https://www.youtube.com/watch?v=sPGZSJXpxqI
May 7, 2012 - Uploaded by zibodiz
A common problem with older InFocus LCD Projectors causes them to turn off at ... How to Repair InFocus Projector PowerIssue (LP290/LP280) ... How to Install a Bare Projector Lamp into your Projector - Duration: 4:05. by ..

Dec 14, 2015 | Multimedia Projectors

1 Answer

Infocus IN102 shutdown after a few minutes


You can use 256YN IC to resolve this issue.
This IC readily availabel in the market. Just change the IC.

Jun 23, 2014 | InFocus IN102 DLP Projector

1 Answer

Total shutdown after after a few minutes


This is a power supply failure.
infocus.dex.com
5E.13440.003 PCBA, POWER BD$78.90

Oct 31, 2013 | InFocus IN102 DLP Projector

4 Answers

IN104 automatic shutdown


Hello, my infocus in104 will power up for a while (1- 5 minutes) when connected to the power supply and turned on, after that it automatically shuts down. Power button does not light red when it automatically shuts down and need to be unplugged for a minute or more before red power button will light up again.

Mar 21, 2013 | InFocus IN104 Projector

2 Answers

Why does Infocus IN102 projector auto shutdown after a few minutes and indicator light blinks red.


Is it possible to repair the controller board some how? Replacement is not an option because I have approx 100 projectors of this model and X16 lying with me, requiring immediate repairs...

Jan 07, 2012 | InFocus IN102 DLP Projector

1 Answer

InFocus LP280 turns on then shortly turns itself off. Will not stay on.


There are 3 things that you should check.
1. The lamp
2. The firmware version. (the last is the "1.26E")
3. The power supply (may exibit oxidation in the ECA main board conector). And you need a technician to clean it.

Apr 08, 2010 | InFocus LP280 LCD Projector

1 Answer

How to Clean the lense on a Infocus LP280


outside- lint-free microfiber cloth and canned air. inside (projector)- canned air.

Nov 09, 2009 | InFocus LP280 Projector, Factory...

1 Answer

LC 4431 SHUTDOWN


could be getting too hot (fan malfunction or dirty), lamp (also hot from dust), or a power problem. so, clean it out and listen for odd noises. if it still does that, you might need to replace the lamp ballast.

Sep 02, 2009 | InFocus LP70+ Multimedia Projector

Not finding what you are looking for?
Multimedia Projectors Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Multimedia Projectors Experts

Juan Carlos Pacheco

Level 1 Expert

36 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5625 Answers

Are you an InFocus Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...