Question about Canon PIXMA MP530 All-In-One InkJet Printer

1 Answer

Cannot fix alarm

The alarm is blinking red and will not allow me to proceed with any functions... no fax, no copy, no nothing... Can you please help?. It is essential that this gets fixed....

Posted by on

  • Anonymous Mar 07, 2009

    mp530 changed color cartridges, now warning light blinks yellow, screen says check computer. Can't find anything out of ordinary. Will not perform any function.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem and the only way that I got it fixed was to take it into a service center. Even though it was out of warranty they still ended up covering it which tells me that it is a common defect. I don't know that your problem is the same as my unit's defect, but it is worth a try. When I took it in they didn't know if they could cover it under warranty until they got inside the machine.


Posted on Mar 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New smoke detector, new batteries, red light flashing is that normal


copied from the manual, available at the kidde website

RED AND GREEN LED INDICATORS This smoke alarm features separate red and green LED indicators. The LEDs indicate the following: GREEN LED CONSTANT ON - AC power is present. OFF - AC power is not present. RED LED - Can be seen through the Push-to-Test button. Blinks once a minute - Indicating presence of a working battery. Blinks once a second - Smoke alarm senses smoke and simultaneously sounds an audible alarm. Blinks once every 10 seconds - Smoke alarm is quieting an unwanted alarm (Model ADC only). (Interconnected system only): OFF - Another smoke alarm in the network has sensed smoke and is signalling this alarm.

Nov 14, 2015 | Kidde 4618 Firex Hardwire Ionization Smoke...

1 Answer

The red alarm light is on, How do I turn it off?


Does the alarm light blink or any other blinking?

Can not tell from your post, but here is the service manual:

http://www.eserviceinfo.com/downloadsm/51636/Oki_ml320t.html

click on "to download, please click here" near the bottom of the page.

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response.

Thanks, Joe

Dec 01, 2010 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

My Canon Multipass F60's alarm is blinking and message says "Waste Ink near full". What should i do?


My canon c530 multipass fax machine has the alarm light blinking and wont fax anything. can anyone please help me?

Oct 01, 2009 | Canon MultiPASS F60 All-In-One InkJet...

1 Answer

Tv has alarm sound and red light blinking when try to turn on


The unit needs to have a part replaced. It's just a matter of figuring out which one. Call Panasonic customer service because they have pretty good tech support. It's likely they will be able to tell you what it is over the phone (because of the alarm). If you're in warranty or the fix is simple enough, they will take care of the expenses. Otherwise you may have to come out of pocket to get it going again.

The only troubleshooting they can offer is advising you to unplug the unit for several minutes and then trying again. If that doesn't fix the problem, it needs repair.

I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please post a comment if you need additional assistance so that I can help you further.

Aug 03, 2009 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

Canon ImageRunner 2020i


first do you have to selec the try with do you are going to use for copy.

Jul 27, 2009 | Canon imageRUNNER 2020i Black and White...

1 Answer

Status light blinking red


Hi,
please follow the steps given below to power cycle and reset the product.

Perform a power cycle
  1. Turn the product off.
  2. Unplug the power cord from the product..
  3. Wait 30 seconds, and then connect the power cord to the product.
  4. Turn the product on.
  5. Make a color copy by pressing the Start Copy Color button on the control panel.
  • If the copy job is successful, you do not need to continue troubleshooting.
Reset the product Follow these steps to reset the product. Step one: Perform a partial reset
  1. Disconnect the power cord from the product.
  2. Press and hold # and 3 while reconnecting the power cord to the product, and then release both buttons.
  3. Try making a color copy by pressing the Start Copy Color button on the product control panel.
    • If the partial reset resolves the issue, you do not need to continue troubleshooting.
    • If the error message displays again, proceed to the next step to try a semi-full reset.
Step two: Perform a semi-full reset CAUTION: Performing a semi-full reset deletes any saved phone numbers on the product.
  1. Disconnect the power cord from the product.
  2. Press and hold # and 6 while reconnecting the power cord to the product, and then release both buttons.
  3. Try making a color copy by pressing the Start Copy Color button on the product control panel.
    • If the semi-full reset resolves the issue, you do not need to continue troubleshooting.
    • If the error message displays again, proceed to the next solution.


May 22, 2009 | HP OfficeJet 7410 All-In-One InkJet...

1 Answer

Need help on lexmark x 4270


To whiom it may concern my printer wont allow me to fax or copy do to it saying paper jam,so I cleared the jam and made sure that nothing is in it but it keep saying paper jam and will not allow me to fax or copy. Can you kindly help me with this problem please.

Oct 28, 2008 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

What is the remedy for copier's red alarm button blinking & fax not working?


Do you mean the "Out of paper" alarm? Check that all paper trays have paper. The by-pass tray should be prperly set to receiv "Legal" size paper and have that size paper in that tray.

Mar 30, 2008 | Canon LaserClass LC 8500 Plain Paper Fax

Not finding what you are looking for?
Canon PIXMA  MP530 All-In-One InkJet Printer Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1818 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...