Question about Canon PowerShot SD300 / IXUS 40 Digital Camera

1 Answer

Canon Powershot LXus 40- Black screen!

When i switch on the camera i can only see a black screen athough i can take photos and actually see them when i connect the camera to a computer.
What could be causing this and can i fix it myself?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,223 Answers

This a CCD failure !! but u are LUCKY enuff

u can get it repaired free of charge it is a manufac fault many face it
see ur self
http://www.imaging-resource.com/badccds.html

see the link dont worry if ur model is not incl in the letter they will do it free of charge just give them a call and pls rate me FIXYA for help

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=221&modelid=8288&keycode=2112&id=29819

for asia

http://support-asia.canon-asia.com/index.jsp?fuseaction=support&prod_type=image-phenomena_notice

Posted on Mar 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Black LCD screen. Nothing in LCD screen. No photo on card. When connected to computer, black images appear, no photo. Problem?


I took a hammer to the shutter - now it opens! Actually, I tried the suggestion and it did not correct the problem. I guess I will have to get a new camera. Very disappointed as this camera is only four years old and well cared for.

Jul 31, 2009 | Canon PowerShot A620 Digital Camera

1 Answer

Canon PowerShot A60~~~Viewing screen black/fuzzy won't take pict.


Its known problem of ccd imager in Canon A60 camera and Canon will repair it free of cost.
Click Canon CCD Imager Advisory for details.

Jul 24, 2009 | Canon PowerShot A60 Digital Camera

1 Answer

I found the timer control button by the shutter on my Canon PowerShot S3is and can see what it does on the display. How do I take time-delayed photos?


After you select it with the small black button, it should kick in by pressing the regular shutter button.
Make sure the timer icon is showing...
Give it a test run...that should do it.

May 16, 2009 | Canon PowerShot S3 IS Digital Camera

1 Answer

Canon Powershot SI screen goes black after taking a photo


That sounds like a sticky lens shutter. They usually have to be replaced, as they usually will need parts. When the camera is working look inside the lens and take a picture(with flash turned off). You should see a black shutter door clicking shut in the lens. When the camera acts up, look inside the lens again. If the door is staying shut full time, that is your problem.

Nov 17, 2008 | Canon PowerShot S1 IS Digital Camera

1 Answer

Canon powershot a75


1. i am not able to view the background from LCD.
2. i tried switch DISP button on and off.
3.Rest all the functions are working fine in camera.
4.LCD is on with Blurr Screen.only thing background and captured photos cannot be viewed.

Oct 22, 2008 | Canon PowerShot A75 Digital Camera

1 Answer

Blind camera


try display button on camera panel

if photos come as simply black then most probably your CCD is dead

Jun 28, 2008 | Canon PowerShot A20 Digital Camera

1 Answer

Canon PowerShot S230 sudden problem


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:
http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819
Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110

Sep 20, 2007 | Canon PowerShot S230 / IXUS 179 Digital...

1 Answer

LCD screen does not come on when switching to camera


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:
http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819
Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110

Aug 13, 2007 | Canon PowerShot S410 / IXUS 430 Digital...

Not finding what you are looking for?
Canon PowerShot SD300 / IXUS 40 Digital Camera Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Digital Cameras Experts

Doberman

Level 2 Expert

246 Answers

Tony

Level 3 Expert

2598 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Canon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...