Re: code co510 coming up on screen what is this error
Low fuser tempture, you must rest the trouble counter or replace a fuse, lamp or thermistor , if it got real cold durring warm up this errow may come up you just must rest the counter this is about a $100-$300 PROBLEM DEPENDING IF IT NEEDS PARTS OR NOT
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
KM/CS 2530, 3530, 4030, 3035, 4035, 5035 C6400 is a fixing unit error. To reset - Try this, enter "10871087" from keypad, You should now be in maintenance mode. Enter "163"press "Start / Print" key. You should see a screen that says "Execute". Press EXCUTE on the touch panel. It is displayed in reverse. Press "Start / Print key. The machine will turn off and then back on then come back to ready. If not then you need to replace the fixing unit. I hope this is helpful,
Hello the problem you have with error code c0510 is caused by the fuser unit the best thing to do is to replace the fuser unit also make sure you have the most up to date firmware installed on the machine
The 6A00 is a Canon generic code for paper path jam.
Solution 1: Move the printhead carriage back and forth a few times.
Solution 2: Check the purge unit: Moving the print head assembly will not clear a purge unit if its jammed with paper, paper clips, push pins, screws, cookie crisp, flower bud pods or the like.
Solution 3: Press the ink pads down in the purge unit. Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks