Question about Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Whirlpool Quiet Partner II soap door not working. The catch doesn't seem to hold or release the door Can or should I just replace the whole assembly?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

Yes, you can buy the whole assembly and replace it. Replacing the assembly should fix your problem.

Posted on Mar 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a quiet partner ii the soap dispenser door will not stay shut, how cab I fix it?


I have the same dishwasher, and have a problem with it shutting when soap cakes up on it. Have you tried scraping the latch door area? Once I cleaned out all the scale it shut better and when I close it, I push gently on the door and help the latch shut. It still opens fine during the cycle and the soap is gone.

Oct 11, 2015 | Whirlpool Dishwashers

1 Answer

Lock light stays on my whirlpool quiet partner II


If pushing and holding the lock button till the light goes out doesn't work, you likely have a problem on the circuit board.

May 24, 2014 | Dishwashers

3 Answers

I have a whirlpool quiet partner ii keeps stopping


DON'T REPLACE THE WHOLE BOARD!!! Are you kidding me? These other answers are a joke. I know exactly what is wrong because I had the same exact problem. I had the same problem with the same dishwasher. Get to the control board panel behind the keypad (from the inside of the door). Look at all the capacitors. If any of them have a top that is convex (bubbling out), then they need to be changed. I had two capacitors that were bad (right next to each other). i ordered the same ones on amazon.com for $5. actually i got a 10 pack. unsoldered old ones. soldered new ones in. works perfectly. these models have a poor electronic board design or a poor overall design that blows these capacitors. Such an easy fix. I read so many internet threads where so many people with the same exact problem and replaced the whole board for $120 minimum if they did it themselves. silly. CHECK ALL THE CAPACITORS FIRST. 95% OF THE TIME when electronics go bad, its a bad capacitor, usually one that deals with the overall power. ~cheers

Jan 24, 2012 | Whirlpool Dishwashers

1 Answer

Whirlpool quiet partner I soap dispenser won't close


Hi


Dishwashers use Bi-Metal strip to allow the dispenser to open/close. This strip when heat up causes the soap door spring to open up the dispenser. If this strip is not heated doesn't allow the door to open. The strip may not be getting 120V or maybe disconnected. Newer (plastic liner) dishwashers use a wax motor to open the soap dispenser. The plunger inside the wax motor slowly moves and pushes the plunger and door open. And, if this wax motor doesn't receive 120 volts, then it'll not work. Please check the voltage to the wax motor/Bi-metal strip; also inspect the connections to these.


Hope this helps...


Daniel

May 18, 2011 | Whirlpool Dishwashers

1 Answer

Our quiet partner iii dishwasher is not working. It is not gettting dishes cleaned soap left on dishes


Our whirlpool gold quiet partner iii dishwasher is not working well . It is not gettting dishes cleaned soap left on dishes on top primarily

May 16, 2010 | Dishwashers

1 Answer

Silverware container


If we are talking about the quiet partner 3 the silverware container can actual hang more effectively on the lower dish rack itself as opposed to on the door. The flap also does just snap on. Hold the back side of the metal with your thumb while pusing with even pressure on the plastic flap. I still reccomend though hanging the whole assembly on the outside of the lower rack.

Jan 10, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

2 Answers

Whirlpool Gold Quiet Partner IV issue with soap dispenser


This happened to me as well. I think I solved the problem. It started when I first lowered the top rack. In doing so, the door doesn't open all the way. It also won't open all the way if your cutlery rack is in the front and you've put large utensils like a spatula. Consequently, detergent dried under the latch and it wouldn't firmly catch. For months I put up with it never emptying completely. The other day I took a tooth brush and very hot water and cleaned under the latch. After, I could feel a difference in the way the latch operated (with greater pop on opening). So far its been doing fine. Hope this helps.
Denise

Dec 05, 2008 | Whirlpool 24 in. GU1500XTLS Stainless...

Not finding what you are looking for?
Whirlpool GU2400XTP Built-in Dishwasher Logo

493 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Mike

Level 3 Expert

4332 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...