Question about Canon PIXMA MP150 All-In-One InkJet Printer

1 Answer

Error e 27 - Canon PIXMA MP150 All-In-One InkJet Printer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 90 Answers

He method for doing so is worded very badly on alot of sites so I will explain my way.

(1) have your printer power down ie. off, just to make sure pull the plug out and wait 10 seconds.

(2) plug printer back in, now Hold down the Stop/Reset button don't let go.
(2a) push and hold the on/off button

----at this point both fingers are holding down the buttons.----

(3) take your finger of Stop/Reset, pause maybe a second now press stop/reset button once and then press again and hold.

--- both fingers at this point are hold down both buttons----

(4) take your finger off on/off and now finally take your finger off stop reset.

---wait for the printer to go into its service mode ie. wait maybe 30 secs a min whatever till the printer carage has moved back into ints original spot.

---after this has occoured you should be able to press Stop/reset to cycle though the options

each time you press Stop/Reset Alarm and on/off should alternate lighting up. Hope this helps.

0 time Green Power off
1 time Orange Service pattern print (auto teste)
2 times Green EEPROM print (dados da EEPROM)
3 times Orange EEPROM reset (EEPROM reset)
4 times Green Waste ink counter reset (Absorvente reset)

Posted on Feb 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannon printer error 27 mp140


Waste ink absorber full or platen waste ink absorber full

Sep 26, 2013 | Printers & Copiers

1 Answer

How to fixs an error 27 canon MP160?


Either Youtube or the canon website would be good for you. Just type it into Google.

Mar 05, 2013 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

My canon MP160 error 27. I've tried the trick in service mode.. But still can't reset it.. please help me..


E27 is the WASTE INK ABSORBER FULL error message. Try send it to service centre to do the WASTE INK ABSORBER replacementjob & waste ink counter reset job.

May 19, 2010 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

My Konica1015 shows a p.27 error message, what


P27 Toner density sensor unplugged or toner density sensor problem.
Conduct the condition of the sensor of the toner and presence of the toner in block of the manifestation, as well as presence of the perfected toner, clean the container with perfected by toner in block of the drum. Thank you.

Sep 23, 2009 | Printers & Copiers

1 Answer

Error Code E07-27 How can I fix it myself ???


That error is a finisher tray lift error. If you do not see anything binding the trays, service will have to be called or finisher disconnected. Pay attention to the screws, they can loosen causing the trays to bind.

May 11, 2009 | Panasonic Workio DP-3520 Copier

1 Answer

Check print cartridge error


Set the properties to print on HP paper. This usually solves the problems

Mar 09, 2009 | HP DeskJet 3745 Printer

1 Answer

Check print cartridge error


Try pushing it gently using some pressure. I had the same problem and it got solved using a little push.

Aug 27, 2008 | HP PSC 1210 All-In-One InkJet Printer

4 Answers

Canon PIXMA MP160 error 27


My canon pixma mp 160 printer/ scanner is showing E 27, ink absorber is full need help please.

Jul 20, 2008 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Keep getting error code E07-27


E07-27 is a problem with the finisher tray lift motor. Make sure that a trash can is not under the tray. Have also seen screws work there way loose causing the tray to bind. If neither is your problem, you will have to call a service provider. Temporarily you can turn the power off, separate the finisher from the machine, unplug the connector, and turn power back on. You will not have a finisher but you can make copies until it is serviced.

Jan 30, 2008 | Panasonic Workio DP-4530 Copier

Not finding what you are looking for?
Canon PIXMA MP150 All-In-One InkJet Printer Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96372 Answers

old marine
old marine

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...