Question about Dryers

Open Question

I have a Dayton fan type 367 ser-10036168 Need wire diagram

This is a antique table fan with brass blades. Is a picture and wireing diagram available. This is a 3 speed oscillating unit with three wires from the motor to the control unit. Two wire 115v ac to control unit. I will have to make Oscillating parts that are missing, and a pictre would be a great help.

Thank you, Robert Miller

Posted by on

5 Suggested Answers

SyxPak
  • 1 Answer

SOURCE: wiring diagrame for hotpoint gas dryer

E-Mail me and I will send you a copy of my Schematic. It's 2 pics, but they are pretty clear and should help you. I came to the site wher I saw your post looking for a pic of an exploded view of our dryer. Trying to open it to fix the glide bushing. Started makin metal to metal noises lately, so I am assuming it's like a nylon glider for the drum?
SyxPakk@Yahoo.Com
Mike.

Posted on Apr 01, 2008

Benimur
  • 6966 Answers

SOURCE: need a wireing diagram for

Hi,

Often the wiring diagram maybe found in the console area or under the dryer top panel. Due to regional differences in electrical code and power requirement, wiring system hence the diagram may differ. Additionally, it would also differ if you are using a 4 wire outlet or a 3 wire hookup.

At this point, perhaps your best bet would be to seek the services of a qualified professional who is very familiar with the electrical/power system of your area as well as general wiring of dryers. Should you venture a DIY, pls post back power requirements/availability whether for a 240/120 or 110/110.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Posted on Jun 17, 2008

burzerko
  • 254 Answers

SOURCE: 1VCF2 Dayton Oscillating Wall Fan

The speed control switch which is what the cord is attached to has gone bad. You can get these from grainger.com for the dayton line of fans.

Hope this helps

Posted on Jun 22, 2008

informatica
  • 1114 Answers

SOURCE: Oscillating

Hi - You can download the manual by clicking the link underlined in blue below:

Lasko

7a5fa71.jpg

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

Posted on Sep 05, 2008

  • 1 Answer

SOURCE: Vintage Oscillating Electric Table Fan ~ Repair & Service

go to this link, hope you might find something useful.
http://www.hudsonscustommachining.com/FAQs.doc
or you can go to this URL http://www.vintagefans.com/contact.htm and post your question there.

Posted on Sep 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Could sure use a wiring diagram for a Dayton 5k961c motor.


Electric Motors: dayton motor, Electric motor repair Kansas ...

en.allexperts.com > Industry > Machine Tools > Electric Motors
Aug 24, 2010 - Electric motor repair Kansas City MEAR Service 816-650-4030: Tyler, it is ... i have a dayton motor with no wiring diagram. i need a wiring diagram for a dayton motor with a model # 5k961c and a reference # r67745ck733 ... 1992 Dodge Dynasty Blower Motor Wiring Diagram · 1998 Ford Escort Blower ...

wiring diagram (ideally color) for Dayton belt drive motor Model ...

www.electro-tech-online.com > ... > General Electronics Chat

Apr 29, 2012 - 9 posts - ‎3 authors
There is a sticker on motor indicating wiring, but seems only an. ... This is a motor for vented - big blade ceiling fan -- a belt driven Dayton Motor ...

DAYTON 1/4 HP Condenser Fan Motor,Permanent Split ...

https://www.grainger.com/.../DAYTON-1-4-HP-Condens...

W. W. Grainger
Rating: 3.8 - ‎6 reviews
Shop DAYTON 1/4 HP Condenser Fan Motor,Permanent Split Capacitor,1075 Nameplate RPM,208-230 ... Typical HVAC Condenser Fan Motor Wiring Diagram ...

DAYTON 1/3 HP Direct Drive Blower Motor, Permanent Split ...

https://www.grainger.com/.../DAYTON-1-3-HP-Direct-D...

W. W. Grainger

Jan 23, 2016 | Dayton Dryers

1 Answer

WIRING DIAGRAM FOR A DAYTON EXH. FAN FOR A GREENHOUSE. tHE FAN GOES TO A THERMOSTAT THEN TO ELECTEICAL BOX


So far, I cannot locate a wiring diagram for an installation. However, this is a single phase "shaded pole" motor.

For a single speed, shaded pole motor, there are only two power wires. For a dual speed motor, a third wire provides a second speed. One wire will be one side of the motor coil(s)...connected to the white power wire. The other wires are the opposite side of one or two motor coils, connected to the black power wire or through a thermostat. A thermostat is simply a temperature operated switch. An additional wire may (should) be a green "grounding" wire.

Specification Sheet from Grainger.
http://www.grainger.com/product/DAYTON-Exhaust-Fan-4C361

Installation manual.
ftp://207.99.53.68/array1/pacs/AS-BUILT/D1112-50-GLOBAL-Terminal&Container(15KV_ARC-RES-Swgr_Outdoor)/D1112-50-O&M/D1112-50%20Global/BM%20%23%20549%20Exhaust%20Fan.d20100210-u113426.pdf

Mar 23, 2014 | Dryers

1 Answer

Wiring for a Dayton motor 6k857L


Wiring diagram appears on side of motor.
This motor is rated 115Volt.
Hot and Neutral wires connect to main terminals.
Connect other wires as shown on label.
For example there can be yellow, black, blue and white wires.

Dayton manufacturing is owned by WW Grainger.
Contact Grainger.
http://www.grainger.com/Grainger/static/help_contactus.html

Oct 12, 2012 | Dryers

1 Answer

Dayton 24" pedestal fan -


there are 3 fan blades available on ebay: http://compare.ebay.com/like/220783606184?ltyp=AllFixedPriceItemTypes&var=sbar

Jul 20, 2011 | Dayton (2C373) Fan

1 Answer

I need a wiring diagram for a dayton 120/230 v capacity start motor model 6k157 or equivalent


I have dayton motor 3/4 hp 120-240v it has 3 contacts 1-2& 4 it has 5 wires 2 white 2 red 1 blue. I want forward rotation! what do I do?

Jan 14, 2011 | Dayton Permanent Split Capacitor Motor Fan

2 Answers

I have a dayton 3/4 hp fan motor. I need to change voltage from 230 to 115. Where can I get a wiring diagram showing the wire changes that I need to make. I have done this before but forgot which wires...


There are many different types of motors. you should have a diagram on the inside of the wiring compartment cover. This is a dayton diagram, but I can't be sure it is the same as the motor you have.Notice line terminals remain the same, but that the internal wires change terminals.


25d910c.jpg

Aug 05, 2010 | AO Smith 1 1/2 HP 115/230V 56C Replacement...

1 Answer

I need a wiring diagram for a farm duty 6k714k


It is generally located on the nameplate of the motor or inside the wiring housing where the outside power is brought in. These motors are usually convertible from 115 to 230 volt by merely switching a couple of wiring connections inside the wiring housing. If you can do so, 230 volt operation is much preferred due to the high speed start-up available and you can use wiring 1/2 the size required for 115 volt operation. Good luck!

Jun 05, 2010 | Dayton Audio Dayton 6K138 CapacitorStart

2 Answers

Wiring diagram for dayton ac electric motor


i need wiring diagram for a dayton electric motor 4mb22

Dec 13, 2008 | Dayton Permanent Split Capacitor Motor Fan

3 Answers

Dayton Attic fan running backwards


First see if the switch has a reverse position. Sometimes you turn the fan assembly in the frame, sometimes you turn the whole frame around. Take the cover off the wiring compartment to see if there are instructions there. Also check on the name plate on the motor, there may be instructions there. Attic fans are usually engineered to blow out.

Aug 02, 2008 | Dayton (2C373) Fan

Not finding what you are looking for?
Dryers Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Brad Brown

Level 3 Expert

15111 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...