An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: can,t remember parential block code
In the setup part for parental control, when it asks for the password..enter 0711 ( twice ) it will probably say incorrect password after the first attempt, do it again....This is the default code and sequence for Philips/Magnavox in 90% of there sets. Let me know and good luck.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Surf throug its menu options and come to parential control window. The parential contro default code is 0711. There you can see the option "Reset". Select it, and press enter. All the channels and programmes will be reset to Factory settings. you can adjust allthe settings according to your taste later. OK.
Over time your blue CRT in the back of your set develops a fungal growth that covers up the glass and prevents light from shining through clean this off with a cloth dampend with waterd down bleach. While you're in the back of the set clean all 3 of the tubes of with this solution. After that wipe the back of the screen off with a dry cloth. Wipe the delfection screen of as well this is the screen that is diagonal to your front screen it actually deflects light to the back of the screen you watch. These can become very dusty over time and block light. This should fix your problem. If it doesn't the fluid in your 3 cathode ray tubes is cloudy and will have to be changed by a tech.
1. Press menu and press right or left button until the Lock menu appears 2. Press up or down button to display code entering mode. Blocking reset status: Set four digit code by pressing number buttons and presses ENTER If code already stored: Press the four digit code and press ENTER. 3.If you cannot remember the stored code press recall button four times within 5 seconds. PIN will be released (blocking reset status restored).
Well, yes. Dust blocks light and will tend to make the image fuzzy if there is buildup. If you clean the optics or anything, Do NOT touch the lamp. Oil or other things will weaken the Quartz and it will burn out very quickly. If you do accidentally touch the lamp, wipe it thoroughly with rubbing alcohol and allow to dry. Follow any cleaning instructions that may be listed in the manual
hello i've just check the manual do this
If the wrong PIN code is entered, the message “Incorrect”
appears. Enter the code again, and then press ENTER.
If you cannot remember your PIN code
1. While the PIN code entering screen is displayed, press RECALL
four times within five seconds. The PIN code will be released
(Blocking Reset status restored).
2. Set new 4-digit code, and then press ENTER.
The LOCKS menu appears.
Yes I Had The Same problem , if your handy with fixing things this will work. Step 1- unplug the TV from wall socket Step 2- disconnect all devices like VCR's DVD Players from the TV Step 3- remove the speaker covers from the TV Step 4 - There are 14 screws on front cover, remove these with a Philips driver, set cover aside clean with soft brush and wash with water Step 5- Gently raise the cover straight up to release it from its supports Once cleared from supports , remove the cover.
Tips- Make sure you don't scratch any of the screens or CRTs
You can clean the mirror with any glass cleaner, make sure to wipe it clean , water and vinegar does a good job to eliminate streaks.
Use a soft duster to clean the dust from the circut boards Tip - Remember take it easy when cleaning
When your finished cleaning, just reverse the steps