Question about HP OfficeJet 7310 All-In-One InkJet Printer

1 Answer

Problems connecting to printer

I have disk for hp7310 but cannot detect printer on wireless network, i've followed all the directions.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 137 Answers

The Officejet 7310 does not have wireless capability, this was a feature for the Officejet 7410. If your 7310 is connected via wired LAN to a wireless router but the computer does not find it try assigning an IP address manually. Make sure the IP address for the printer is on the same subnet as your laptop or other wireless devices.

Also, if you are using Vista the original drivers will not work, you will need to download updated drivers from HP's website here.

Regards,
Bob Headrick, MS MVP Printing/Imaging

Posted on Mar 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i install canon pixma mx320 series printer?


hello,

Remove all the printer settings, and swich off the printer.And restart your system. install the drivers with MX 320 CD. Once it ask you to switch on your printer, please switch on then the printer it automatically it will detect and it will finish this.This is the normal installation procedure .
If you want more help from me please give me the details of the OS and error code and other's.


Tks

Feb 10, 2015 | Canon PIXMA Printers & Copiers

1 Answer

Why is my dell 713w showing it is not connected to the wireless network?


This situation has happened to my HP printer. The way that I fixed the problem was to connect the usb cable, then trough the printer software on the computer while computer was connected to the wireless, the printer detected the network through usb cable. Sometimes it takes may be about 15 minutes that my printer detects the network, so I have noticed that I have to give a time to it, because it searches, and searches, and it takes some times.I recommend that you leave the printer on for at least 30 minutes. Check to see that printer detects any other neighbor networks at all, because the network card on the printer may be malfunctioning, and not detecting any network at all. If you can connect your printer to a laptop or a desktop with usb cable and use any software that comes with your printer, it should have the (connect to the wireless ) software facility.That facility will then ask you for your password and it will the set up the printer wirelessly.It is like starting all over again that has happened to me also. I wonder if Dell support can assist you or not, but they should , since they built the printer.Hope all things go well with you.

Jul 06, 2014 | Dell 1815dn All-In-One Laser Printer

2 Answers

Vista driver


The print driver solution for this product is included with the Microsoft Windows Vista operating system and is already on the computer. No special driver download is necessary for this product.
Please follow the simple instructions below to easily get the product working with Microsoft Windows Vista Operating system.

Installation Instructions

Direct Connection (Parallel & USB connector)

  1. Verify that the printer is turned ON.
  2. Connect the Universal Serial Bus (USB)/ Parallel (IEEE 1284) cable to the printer and to the computer
  3. Click on the Close button when the message "Your devices are ready to use" is displayed in the screen.
  4. The printer is now ready to accept the print job.

Wired Network & Bluetooth Connection

note.png
NOTE:For Bluetooth connected printer, please ensure that the printer's access mode is set to public mode for detection.
  1. Verify that the printer is turned on.
  2. Click Start > Control Panel and then select Printers .
  3. Click on Add a printer .
  4. Click Add a network, wireless or Bluetooth printer . A list of detected wired network or Bluetooth printers will be displayed.
  5. Select the printer you want to install and click Next . Follow the on screen installation instruction to complete the printer driver installation.

Wireless Connection

  1. Verify that the printer is turned ON.
  2. Ensure the printer's wireless network setting is set to the correct wireless profile matching the local wireless network/computer's wireless card setting.
    If you have previously configured the printer's wireless network setting, matching local wireless/computer's wireless card setting, please proceed to step 3.
    if you have NOT previously configured the printer's wireless network setting to match local wireless network/computer's wireless card setting, please follow the steps below.
    To set wireless network settings in an infrastructure network
    Connect the printer to the computer with the cross cable (included with the printer) or connect the printer to the network with a network cable.
    Press the configuration button once to print a configuration page.
    Open web browser, and type in the IP address that has been assigned to the printer.
    Configure the printer's wireless setting to match local wireless network/computer's wireless card setting.
    Unplug the cross cable/network cable.
    Activate the printer wireless network, activate the computer's wireless network profile.
    Proceed to step 3.
    To set wireless network settings in an ad hoc network
    Do the following to reset the printer's network settings:
    1. While pressing the Configuration Page button, press (Resume button) three times.
    2. Wait about 20 seconds, and then press (Power button) to turn off the printer.
    3. Disconnect the power cord from the printer.
    4. Wait about 20 seconds, and then reconnect the power cord.
    5. Press (Power button) to turn on the printer.
    6. Open the configuration utility for the computer's wireless network card, then create a new wireless profile with the following values.
      • Communication mode: ad hoc
      • Network name (SSID): hpsetup
      • Security (encryption): disabled
    7. Activate the wireless profile.
    8. Wait two minutes for the printer to obtain an IP address, then print a wireless configuration page to verify the following for the printer's network settings.
      • Communication mode: ad hoc
      • Network name (SSID): hpsetup
      • The IP address is NOT 0.0.0.0
    9. If one of the above conditions is not true then repeat the preceding steps. Proceed to steps 3 below.
  3. Click Start > Control Panel and then select Printers .
  4. Click on Add a printer .
  5. Click Add a network, wireless or Bluetooth printer , a list of detected printers will be displayed.
  6. Select the printer you want to install and click Next . Follow the on screen installation instruction to complete the print driver installation.

Dec 15, 2013 | HP DeskJet 450wbt InkJet Printer

1 Answer

Canon printer won't print wirelessly


there is always a way to fix things,

it may be the settings in the printer itself. it does need to be configured to work on the network, you will need to see if it is on the network firstly. then setup ip settings afterwards to get it going, then a re setup on the computer.

If you would like additional assistance with setting it up I am available to do it with you on TeamViewer so you can watch what I do for next time.

Regards,
Adam

Oct 24, 2012 | Printers & Copiers

1 Answer

How to stop orange wi fi light from blinking


The blinking WiFi light on your printer could indicate that it's trying to communicate with your wireless network or it's not connected to your wireless network anymore. A quick fix to this problem can be achieved by rebooting your system. Simply unplug and re-plug your printer and your wireless router into the power outlet and reboot your computer. Once everything turns back on, check the status of the WiFi light and try to print again to verify that the problem is fixed.
You can also do the following steps to reset the printer wireless network adapter:1. From the printer operator panel, press the Setup button.2. Select Network Setup.3. Select Reset Network Adapter.4. Hit the OK button.
The WiFi light will momentarily turn off and then on solid orange. You can then try to reconfigure the printer to connect to wireless network using the Lexmark Wireless Setup Utility application on your computer. Go to Start menu > Programs > Lexmark 4600 Series folder > Lexmark Wireless Setup Utility. Simply follow the instructions on your computer screen.
However, if you wish to have it connected directly to your computer. Simply connect the printer with the USB cable that came with it in the package.
Should you still need assistance, please leave a comment to my response and I'll get back to you. Should this resolves your problem, your rating will be greatly appreciated.

Nov 20, 2011 | Lexmark X4650 All-In-One InkJet Printer

1 Answer

Cannot get the wireless connection to work on the printer. The USB cable is connected to the back of the PCU. I've installed and uninstalled twice and nothing. It did work when I first got it and...


Here are some guidelines to identify and fix your wireless communication issue:
  • What is the status of the Wi-Fi light on the printer? Green light means that it's connected to a wireless network while Orange light means it's not connected to a network.
  • Try to print the printer's wireless network settings to determine if it's connected to your own wireless network. On the printer operator panel, touch the Setup button > Network Setup > Print Setup Page. Your printer will then print the its wireless network information page. Ensure that the printer is connected to your network by checking the Network Card Status, Wireless SSID, Quality or Trouble Code.
  • If printer is not connected to your network, you may need to reset your printer's wireless network settings. On the printer operator panel, press Setup button > Network Setup > Reset Network Settings. The Wi-Fi light on the printer will momentarily turn off then back on to solid orange. You can then run the Wireless Setup Utility application on your computer to reconfigure the printer to connect to your wireless network. On your computer, launch the Lexmark Printer Home application > go to Settings tab > Wireless Setup Utility. Please follow the instructions on your computer screen.
If you still need assistance, please contact Lexmark Technical Support Center for additional assistance.

Aug 21, 2011 | Lexmark Pro901 All-In-One Inkjet Printer

1 Answer

Is the Lexmark x5495 wireless? If it is, how do you connect it to a laptop. I lost my installation disk.


The Lexmark X5495 printer is not a wireless printer, however, you have the option to connect it to a wireless print server. You can then connect the wireless print server to your wireless network so all the computers connected to your network will have access to the printer.
To connect the printer to your laptop, please visit the Lexmark website at http://bit.ly/hsBChY to download and install the printer driver. Execute the file and follow the instructions on your computer screen.

Aug 11, 2011 | Lexmark X5495 Printer

1 Answer

I have a hp photosmart c7200 all-in-printer and have a desktop which it is setup to. I also have a laptop which I'm tring to setup up wirelessly but having trobule. Any suggestions.


Have you run the Wireless setup wizard from Printer ? If No, Press Setup button on printer front panel - Scroll till Wireless/Network settings - Choose Wireless setup Wizard and follow the directions.

After you have setup printer on network - Run the Printer s/w disk and Choose Add a Device and Choose Wired/Wireless network and continue with the Installation screen.

Jun 24, 2010 | HP Photosmart C7280 Laser Printer

2 Answers

Cannot connect wireless


I'm not sure how you have it set up right now, but if you have the printer set to "shared", then you can connect to the computer that's connected to it from another wireless device and double-click on the printer. It will let you install the driver for it and add it to your Printers list as an available printer. Then when you print you just select that printer and Windows should take care of it. If you have already tried this please post back with some more information as to the process you have followed and where it errored out.

May 13, 2008 | Lexmark Z1420 Printer

Not finding what you are looking for?
HP OfficeJet 7310 All-In-One InkJet Printer Logo

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...