- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Donna, the 52 and 62 inch are both ITC222 chassis so the parts are the same for both models. Did the solder get shorted when you instaslled it or perhaps the HOT was shorted, as usually only a dead short will cause that type of arching. If it didnt burn a hole through the circuit board, the board should still be salvageable. Please respond to this same post and let me know wether the board is burned through our not.
sounds like the Red CRT (tube) has shorted. You can test by removing the RED crt circuit from the end of the RED tube and making sure it isnt touching anything try powering up the set. If it comes on and doesnt shut down the red tube is the problem and will need to be replaced . expensive part to replace the Red XRT will be over 300 and at least 2-3 hundred to have it installed unless you know someone who can replace it for you.