Question about Bizfon Additional 680 Control Unit Phone

1 Answer

Calls ring in but can't hear caller

Ran through the diagnostics and did not have any problems.

Posted by on

  • OSiodmak May 03, 2009

    All the phone extensions ring, and stop ringing when the phone is answered but I can not hear anyone and they can not hear me. I have rebooted the system and re-run the diagnostics (which all test fine) but the unit stops functioning after a while with no warning at all.


    Have a call into BizFon but they do not have support on weekends.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Yes repair bizfon please call us 772 405 0061 free diagnostic

Posted on Dec 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Nokia 701 cant make outgoing calls. Whenever I try to call someone it disconnects before it even rings and displays "No Answer"


If its a case where you can receive calls and texts, and send texts no prob but you cant call out then its a caller-id problem with your mobile service provider. Ring up the support team and have them reset your caller-id on their end. Once done, power cycle the phone and the phone shoild call outbound no problem.

Aug 19, 2013 | Nokia Phones

1 Answer

My panasonic KX-TG5000 phone headsets cannot make or recieve outgoing calls and the intercom function is gargly.


You need to reset the menu once again as it is possible that the phone had hung up as there was LINE PROBLEMS . Once this was reset the CLIP facility came back. So if you can once again remove power battery and keep aside to reset , then start all over to set up the base and slave units to MESH , the intercom and line facility must work.
You can remove the battery from the slave remote units to reset.

Oct 20, 2011 | Panasonic KX-TG4500 Phone

1 Answer

Our phone system rings three times (on the caller's end) before the standard greeting connects. We use Avaya and Caller ID and it seems it is standard with that program and calling feature that the...


Is this an IP Office?
This is how it works. For some reason the IP Office waits for teh first 2 rings to get caller ID, and then lets the call ring in.

Sep 07, 2011 | NorStar M7324 Telephone

1 Answer

No caller ID. TP company says I have service.


  • Did you fully charge your phone? - Make sure you fully charge for 16-24 hours .

  • Is the battery old? - Replace the battery.

  • Is the electrical outlet switch turned on? - If you are using AC (electrical) power, make sure that the unit is connected to a non-switched electrical outlet.

  • Are the connecting wires tight - Unplug the AC power converter from the unit and plug it back in.

  • Do you have Caller ID service with your telephone company - In order to receive Caller ID records, you must subscribe to the standard name and number Caller ID service available through your local telephone company. If the Caller ID works for normal calls but not on Call waiting calls, then you must contact your phone company to get the combined CID/CW service.

  • Caller ID shows up after second ring - Be sure to wait until the second ring before answering. Caller ID signals comes through after the first ring, if caller pick ups phone too soon Caller ID signal will not be transmitted to the handset.

  • Confirm that caller ID is still working on that particular line by checking another phone on the same line - If Caller ID is not coming through contact your phone company provider.

If this does not fix your problem, contact your authorized Service Center.*

Oct 16, 2010 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Program "Do not disturb" on business phone


It's pretty straightforward. You pick a spare button, dial FEAT 00 press the blank button (with a light) and press FEAT 01. There are considerations that I'll reproduce here.

Do Not Disturb (F01) 8
Use this feature to be able to press a programmed button to prevent incoming calls for the
extension from ringing (lights still flash). When Do Not Disturb is on, outside callers hear ringing
while inside callers hear a busy signal. You should use Do Not Disturb only if someone answers
outside calls for your extension when you do not answer them.
Considerations 8
Do Not Disturb is available only on system telephones.
Do Not Disturb requires a button with lights. When the Do Not Disturb feature is on, the light
is also on, indicating that the telephone will not ring.
■ Use Do Not Disturb when you do not want the auto attendant or the voice messaging system
to transfer calls to you.
■ Use Do Not Disturb if you are assigned to a Hunt Group and you leave your desk, so calls to
the Hunt Group will skip your extension and ring immediately at the next available extension
in the group.
■ To avoid missing calls when Do Not Disturb is not needed, turn it off.
■ If Do Not Disturb is active at a doorphone alert extension, the person at the doorphone hears
signaling, but the alert extension is not signaled.
■ Unanswered calls that are transferred from an extension with Do Not Disturb active ring at
that extension if they transfer return.
■ Extensions with Do Not Disturb activated do not receive Caller ID information, unless the call
is answered.
■ Users with Automatic VMS Cover Assigned or with VMS Cover turned on can activate Do
Not Disturb
to Send All Calls immediately to their voice mailbox.
■ Users with Call Coverage turned on can activate Do Not Disturb to Send All Calls
immediately to the covering extension.
■ You cannot use Call Screening (F25) when Do Not Disturb is turned on.

Carl

May 10, 2010 | Phones

1 Answer

Kx tga931ct


I received no ID on my incoming calls. I have ensured caller taking ID is checked "ON" in phone options but some reason I do not have caller ID on my incoming calls. Anyone help is greatly appreciated. Thanks.

Mar 29, 2010 | Panasonic KX-TG1033S Cordless Phone

1 Answer

One ring - noise like fax to caller, phantom call to receiver


Try unplugging all sets and call in. Do you still have a faxlike tone, like from an ALARM system or something else down the street?

Aug 21, 2009 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

Can't dial out or receive calls


constant dial tone and cant dial out or receive calls

Feb 24, 2009 | Uniden Cordless Phone

Not finding what you are looking for?
Bizfon Additional 680 Control Unit Phone Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bizfon Phones Experts

kakima

Level 3 Expert

96518 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4757 Answers

Are you a Bizfon Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...