An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: dont turn on
Make sure the hold/lock was not engaged.
Triple Reset for Philips’ GoGear: Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off.Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab.Reset the player one more time while connected to computer. Follow the repair instructions. After repair is complete, upgrade the firmware for this player. Will erase all the songs, but you should be good to go again. -Tha Mp3 Doctor
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is battery problem, since it work with your computer directly, you no the computer power supply charge it directly so all you need do now is to get another battery and make sure you charge the new battery for some time before you power on.
I dont quite know but if you still have the software if not http://www.sandisk.com/DriverDownload/index.asp there is the website to get it. If you use that software you should be able to see what songs it has on it and take them all off.
And put a couple of songs on from a different selection on it (none from the original sync) and use the software to put it on and see if that works.
If you have any questions please dont hesitate to ask
Y'all should go to http://www.mymusix.com and download the "player update" (among other tools) to solve this problem. I just bought a returned one today from Radio Shack and had to spend over an hour to get it calibrated properly. It was pretty crazy...I had to press down on "play" and the "reset" buttons simultaneously and then plug in the USB cable, let go of "reset" and then let go of "play" once the "player update" software recognized the darn thing. It's now working perfectly and actually a great deal for $20.
Hopefully you can use the FAQ section on mymusix.com and figure it out exactly, otherwise I'd be happy to give you the step-by-step instructions I followed.
I had the exact same problem with my mp3 a couple days ago and someone posted a solution for it. U can reset ur mp3 by pressing the menu button and the A/B button at the same time, hold that for a few seconds and try to turn it on again. It actually works!!!