- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This model CRT tv cannot be connected directly to lap top. Laptop has VGA output and there is no VGA input to this TV. Tv has only AV sockets to connect in. You must have a VGA to Audio Video converter to be used in between TV and Laptop. This device can be bought from electronc shops. It will have a VGA input, and audio video output. You have to connect your laptop to this device using a VGA to VGA connecter, and from this devices' output, you will get audio video output, which can be connected to TV and select the TVs' input to AV. OK.
Your TV has only S-Video input socket, and sockets for "Pb,Pr, and Y" [Spit Video],input sockets are there. This means that your TV can only accept these signals as its inputs. Normally computeres output comes in the form of a "VGA" [Video Graphics Arrey], type. Some may output AGP [Advanceed Graphic Protocol]. These signals are not compactable with none of these inputs that your TV have.
There is a device known as [VGA to Split Video] or [AGP to Split Vodeo] converter, that can be bought from the electronics market places. You should give the details of your TVs inputs, and the video output type of your computer. It is best for you to go with the TVs user manual, so that they can choose the best mach of equipment to you. They will give information about the connections and the chords needed for that. If you the computeres' sound also through TV, it can also done with the healp of another chord connecting to the audio out socket from the computer to audio input socket of the TV. Ok.
I was awaiting your response in chat session but could not get any thing.
Please hook cable box in Video input-7 instead of Video input-6 in TV and select Video input-7 with remote on TV.
Regarding continues on-screen display of video-6, press Display button on TV remote once, on-screen display will disappear.
using your cable box connect the audio and video outputs to the tv via the RCA inputs1, 2, 3, or component inputs on the tv and then select the coresponding video input to view your cable. If you do not have a cable box you can connect your cable to the antenna A or B input jack on the back of the set and set the tv input to antenna
Anyways here are the detailed instructions for connecting a DVD recorder to a TV
The first step to connecting a DVD Recorder to your TV is to
determine what type of connection you want to make between the TV
source (Cable, Satellite, Antenna), the DVD Recorder and the TV. This
is usually determined by the outputs and inputs available on the DVD
Recorder and the TV.
If you have an older TV that only accepts
RF (Coaxial) input, then you would connect the RF output (a coaxial
cable) from your TV source (in my case a Cable Box) to the RF input on
the DVD Recorder. Then connect the RF output from the DVD Recorder to
the RF input on the TV. This is the most basic (and lowest quality)
option for connecting a DVD Recorder to any TV.
If you want to
use higher quality cables, then you may want to connect the TV Source
(Cable and Satellite only, not Antenna) to the DVD Recorder using
Composite, S-Video or Component video and audio cables.
composite cables (also known as RCA, the yellow plug is video, the red
and white plugs, audio): Plug in the composite cables to the RCA
outputs on the back of your TV source and then plug in the composite
cables to the RCA inputs of the DVD Recorder. Then connect the RCA
outputs from the DVD Recorder to RCA inputs on the TV.
S-Video and RCA audio cables: Plug in the S-Video cable to the S-Video
output of the TV source. Plug in the S-Video cable to the S-Video input
on the DVD Recorder. Next, connect the RCA audio cable to the output on
the TV source and the input on the DVD Recorder. Finally, connect the
S-Video cable and the RCA audio cable to the output on the DVD Recorder
and the input on the TV.
To use Component Video cables and RCA
audio cables: Connect the Component Video cable and the red and white
RCA audio cables to the outputs on the TV source and the inputs on the
DVD Recorder. Next, connect the Component Video cable and RCA audio
cable to the outputs on the DVD Recorder and the inputs on the TV.
that the TV source (either Cable, Satellite or Antenna), the DVD
Recorder and the TV are all connected, you need to configure everything
to make sure that TV is coming through the DVD Recorder, for recording
Turn on the Cable Box or Satellite Receiver, TV and DVD Recorder.
you connected everything using the RF connections then the TV should be
passing through the DVD Recorder and displaying Television on the TV
screen. To record in this mode, you would need to tune to either
channel 3 or 4 on the TV and then use the DVD Recorder TV Tuner to
change channels and record.
If you made connections using
either Composite, S-Video or Component cables, then to view or record
TV, two adjustments need to be made. First, the DVD Recorder needs to
be tuned to the appropriate input, typically L1 or L3 for rear inputs
and L2 for front inputs. Second, the TV also must be tuned to the
proper input, on a TV usually Video 1 or Video 2.
If you have a
Dolby Digital 5.1 Surround Sound A/V Receiver you can connect either a
Digital Optical Audio cable or Coaxial Digital Audio cable from the DVD
Recorder to the receiver to listen to audio through the receiver.
Hi there, It appears you may be using a cable type which isnt compatible with stereo. The Coaxial output on a lot of the old VCRs dont always support stereo so that may be your problem right there. i suggest you try connecting the cable box directly to your TV using a scart cable. Scart definately supports stereo audio so if this doesnt give you stereo sound the problem lies within the cable box's audio settings which you should be able to access with your remote.
ope this helps you solve your problem :) Good Luck.
Hi, if I understand you right, your TV has only one (1) input method and that is an S-Video and you would like to view regular TV or cable channels. Two possible ways of getting to watch: 1) Get yourself a TV Tuner that will accept antenna or cable input and whose Video output will be fed in to your S-Video. Normally (but not always) output is a yellow RCA jack but of course some would have S-Video output also. Then you would need a cable to conect the output of the tuner to the input of your TV. Cables also can be S-Video to S-Video or RCA to S-Video. Of course, you would need another RCA pair (stereo) to feed the audio to your amp for the sound. 2) Another is to use the built-in TV tuner of an old VCR. Same procedures follow. Hope this works out for your. Please let me know how it turns out. Cheers.