Question about Jet 3 Ultra Power Chair

2 Answers

8 lights flash when i power up my jazzy1103 ultra

I CALLED AROUND TO DIFFERENT REPAIR PLACES TO FIND OUT WATS WRONG WITH MY JAZZY1103 ULTRA WHEEL CHAIR, AND THEY TOLD ME THERE IS A SHORT SOME WHERE I CAN NOT FIND IT ANY WARE THERE IS 8 FLASHING LIGHTS ON THE CONTROLLER THAT MEANS THERE IS A CODE. PLEASE HELP.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

All the red and yellow lights are flashing and the speed lights as well. whats wrong with it?

Posted on Jul 26, 2011

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Http://www.spinlife.com/Pride-Jazzy-1103-Ultra-Indoor-Power-Wheelchair/spec.cfm?productID=72348 I don't know if this is your wheelchair or not, but this website does have a manual on it, and I did take a look I couldn't find anything about the codes your talking about, I would call the company from which you got it from..and ask them what does the codes mean, or if your not happy, call another wheelchair provider I go thru Hudson Medical calling another company and see if they might be able to help you.

I don't know if this will help but I certain hope it will.

Posted on Mar 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Shoprider power chair won't move and 8 Battery LED Lights are flashing


Code 8: Controller problem. Also, check to see if your gearbox levers are engaged - if you can roll the chair by hand the gearbox is not engaging the motors.

Mar 20, 2013 | Pride Mobility Products New Pride Mobility...

1 Answer

I JUST PURCHASED A JAZZY WHEEL CHAIR AND IT IS I THINK 2003 MODEL WHEN TURNED ON THERE ARE 3 RED LIGHTS AND 4 YELLOW LIGHTS FLASHING AND NOTHING HAPPENS


the 7 lights indicate a joystick problem which means the joystick/controller will have to be replaced since there is no self repair fix Unless you can locate a good used joystick/controller for cheap (around $600.00 rebuilt) I would return the chair and get my money back Hope this helps

Jun 20, 2011 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

We have the flashing lights/chair not moving problem. We checked the batteries, they are fine, found that it was controller issue. Upon opening the controller piece we found some black oily substance under...


Hi petenchar

Here is a repair center for you.
USA REPAIR CENTER:

PG Drives Technology Inc
2532 East Cerritos Avenue
Anaheim, CA 92806-5627

Tel: 714 712-7911
FAX: 714 978-9512
E-mail: usrepairs@pgdt.com

www.pgdt.com

ps. The port under the joystick controller is for a technition to plug in a programmer. The programer can tell a tech what is wrong with your chair or he/she can program the chair for different chair atributes. It can also be use for an off board charger.

Good Luck
mimobility

May 01, 2011 | Pride Mobility Products New Pride Mobility...

1 Answer

When I turn on controller power the speed lights flash slowly. Joystick does nothing and chair is dead. Chair is Pride Jet 3 Ultra.


Do all of the speed lights flash at the same time or do they ripple from left to right? If they ripple from left to right the chair is in lock mode and you can use the unlock procedures from my tips to unlock. If they are all flashing at the same time you have an internal joystick problem and the joystick needs to be replaced Hope this helps

Apr 27, 2011 | Pride Mobility Products New Pride Mobility...

1 Answer

On my Ultra Jet 3 th power lights keep flashing?


Count the number of flashes IE 3 flashes a pause then 3 flashes this is a error code and tells the tech what the problem is. Without knowing the number of flashes I cannot help. If you have your owners manual there should be a page for error codes somewhere near the joystick page

Aug 16, 2010 | Jet 3 Ultra Power Chair

2 Answers

The lights are flashing and i cant get the chair to move. What should I do?


The flashing lights is a fault code. Count how many lights are flashing, and let us know, then we can tell you what the fault is. Check that both free-wheel levers are in the correct place. Good luck. Neil.

May 20, 2010 | Jet 3 Ultra Power Chair

1 Answer

My push button pad, on a Pride Jet 3 Ultra, is ripped open, where can I buy repair parts for this controller? I need to buy a new pad and glue it down.


You need a quick-drying, and FLEXIBLE adhesive to fix your keypad. Surebonder 9001 is one that I use. Clean the surface around the torn area with 100% acetone (fingernail polish remover...make sure it is 100%). Wait a minute to let it dry, then apply the adhesive. Let it set and you are good to go.

Jul 01, 2009 | Pride Mobility Products New Pride Mobility...

1 Answer

Problem with joystick on Jazzy 1103 ultra


You will need to take it in for repair. 8 bar flash usually means you have a bad joystick/controller. They can sometimes send it in to the manufacturer to have it repaired. Find a reputable dealer and relay this info to them.

Apr 01, 2009 | Pride Jazzy 1103 Ultra Indoor Power...

3 Answers

Lights just flash on controller and wont move jet 3 wheel chair


Do they flash in series? Like ten flashes then a pause then ten flashes?

Mar 27, 2009 | Pride Mobility Products New Pride Mobility...

Not finding what you are looking for?
Jet 3 Ultra Power Chair Logo

337 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jet Wheelchairs Experts

Colin Taylor

Level 2 Expert

340 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

269 Answers

Mitchellwootencourts...
Mitchellwootencourts...

Level 1 Expert

12 Answers

Are you a Jet Wheelchair Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...