Question about Mitsubishi WT-42315 42" TV

1 Answer

Mits big screen vs-60707screen comes on red then turns off 10sec

I have a Mitsubishi vs-60707 made in meixco sold from plant in irvine on december 2000, that has been working fine and then one night had a little red tone to the back ground and the next morning when u turn it on the screen comes on red with little line about 1.5' apart, from side to side and then gets brighter after about 10 seconds the tv turns its self off if u turn it back on it dose the same thing . What is it and can i do it and how much ?? thank u 4 your time

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Either a bad red crt or bad transistor on the red crt pcb!

Posted on Feb 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi VS-6071 60" Rear Projection TV Problem


can you give me the number of the manufacture of a 60in mitsubishi VS-60707

Oct 25, 2008 | Mitsubishi VS-60707 60" Rear Projection...

4 Answers

MITSUBISHI TV VS-60607


HI there,

Check for any bad solder on the mainboard of the TV, and also check for any burn fuse on the powersupply area... BAd solder was very common problem on Mitsubishi TV..

micro

Jun 07, 2008 | Mitsubishi VS-60607 TV

3 Answers

Mitsubishi vs 60707


pleaser eset you TV as below.
Turn off and remove the power cord from the main socket.
leave it for about 30 min
turn back on again.
please make sure your sleep mode is off.

May 19, 2008 | Mitsubishi VS-60707 60" Rear Projection...

2 Answers

I have a Mitsubishi VS-60707 that won't turn on. Just prior to this it would turn on with normal audio but the video was very, very dark.


Try this nubs.

Take the speaker panel off, and then the other black panel directly underneath exposing the guts, there should be some multi colored wires exposed that go to your power on and volume up and down, whatever... follow the wires up underneath, they go in the hole the panel was covering up.. (dont try to take the screen off just plain dumb..) there should be 2 white plugs connecting the to sets of multi colored wires just inside that go to somewhere in the back of the tv... Unplug them both big one first then push power on nothing should happen yet.. then unplug the second one wait about a minute or whatever plug them both back in and push power. it should come to life... remember not to touch random **** or you will get shocked to ****. MY vs. 60707 works fine now... (you might have to do this a couple times before the fuckin' passive aggressive ****** will work:)
form kyle c peace..........

Sep 23, 2008 | Mitsubishi VS-60707 60" Rear Projection...

1 Answer

What is the easiest and safest way to move the VS-60707? Does it just lift off the base? If so how?


I`m not so sure about Mitsi`s, But usually the Chassis comes out as one complete unit so that it can be removed for service and taken away back to the workshop. The philips ones, The whole top section (Screen & Mirror) used to come away as one piece and then the whole bottom section could be taken away for service. Have a play but DON`T TOUCH THE MIRROR, it is silvered on it`s face, is EXTREMELY EXPESIVE to replace and is VERY EASY TO DAMAGE with finger prints and cloths etc.
Ian

Apr 16, 2008 | Mitsubishi VS-60707 60" Rear Projection...

1 Answer

Mitsubishi VS-585R


Here's something that might also be useful. After you turn on the set, and get the regular red blinky lights, hold down the Device and Menu buttons together for about 5 seconds.
The Power light will start to flash in a two digit sequence.

For example, 3 flashes, then 7 flashes = 37.

Dec 21, 2007 | Mitsubishi VS-5043 50" Rear Projection...

1 Answer

Mitsubishi VS-60707 60 in. Rear Projection Television


When it gets better after warm up it can be a capacitor in the 160 Volt high voltage circuit or a cold solder joint. these 2 thinks would be my best guess on this set.

Oct 26, 2007 | Mitsubishi VS-60707 60" Rear Projection...

1 Answer

Convergence?


not very likly. The chips on this board have to be replaced and the time involved to replace these and service call can be expencsive. If a new board was available you could be looking at a $500.00 bill plus

Dec 14, 2006 | Mitsubishi VS-60707 60" Rear Projection...

Not finding what you are looking for?
Mitsubishi WT-42315 42" TV Logo

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1207 Answers

The Knight
The Knight

Level 3 Expert

72256 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...