Question about StarTech.com StarView SV211K 2-port KVM Switch

1 Answer

With my starview 3 all of sudden my sound is distorted

My sound seems to have dissapeared and at time distored on high volume it works fine on tv or dvd!

Posted by on

  • aj4unalkat Feb 28, 2009

    Thanks mate tried that never worked as it's on all the channels. thanks though.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,011 Answers

To get back sound channels ect just select the channel in question press menu, 
select installation, select manual scan, click ok on down frequency. 
It'll now scan for channels when its finished exit back to normal 
tv viewing screen go to the end of your channel listing and the desired channel will be there with sound. 
This can be done on any channel with no sound by just selecting that channel following the instructions above. 
Hope this helps 

Posted on Feb 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Image disappear, loud, high pitch noise


It is likely that your Sansui TV has a power supply problem.

Jan 17, 2014 | Sansui 22"" HD LCD/DVD Combo TV

1 Answer

I was given an older Sony TV Model KV-27510. It works fine but when watching TV, the Channel number stays on in the upper right corner of the screen. (in this case #3 since I have cable) When watching a...


some tvs are set to hotel mode if they were bought for this and can have the channel number on all the time , you may be able to remove this using this manual. https://docs.sony.com/release/KV27S10.PDF it may help you to read this to remove it.

Jun 30, 2017 | Sony Televison & Video

1 Answer

My Polaroid 1911 TXLB 19in television is not working properly. The volume is very very very low. We have a DVD player hook up to it and its been working fine. Last nite was working, shut it off and today...


check the Sounds with Local TV channels.Is it still low?If it is still low sound circuit has to be repaired.if it is ok,sound switching circuit has to be repaired(TV to Video)

Jun 14, 2011 | Televison & Video

1 Answer

I have a 50" samsung plasma that was working fine now the volume just dissapeared & when i try to adjust the volume it shows the normal volume display with headphone icon in the display & when i...


You would need to replace the headphone socket then and if I am correct it should be mounted to a plug in board. I first need the model number of your Samsung to look up the part number. The model will be on a sticker on the side and will be something like HTP50***/XAA or something like that.

Sep 02, 2010 | Televison & Video

1 Answer

Volume control works in DVD mode but not in TV


Where is your TV sound coming from? Is there a volume control at the source?

May 05, 2010 | Denon AVR-485 Receiver

1 Answer

Fender m80 ...hey before im sorry bout my poor english.


output caps, replace them.
also the speaker could be getting tired.

Dec 07, 2009 | Fender Fm25dsp 1x10' Guitar Combo...

1 Answer

The sound has quite working


First, NEVER turn the volume all the way up to see what's wrong. If HALF volume doesn't work you're only risking a catastrophic speaker blowout if you should suddenly flick the switch that's causing the problem with FULL volume on.

Look for the MUTE or Volume +/- controls on the remote and indicators.

Apr 12, 2009 | Yamaha HTR-6030 Receiver

1 Answer

No sound


the DVDS151 has its own built in volume control that is easy to hit the buttons near the bottom of the remote and accidently turn the volume down.
even tho your tv volume is set high it won't pass the sound to the tv if it is on mute or turned down.

Mar 18, 2008 | Daewoo DVDS151 DVD Player

1 Answer

Sound form Bush TV


It could be several problems, I'll share with u a couple. All of them need a tech.[technician]
Your volume control works by adjusting the voltage\current to the speakers. The VOLUME CONTROL could be damaged\fixed at a point [even if you are raising\lowering] at high volume.Sometime the control has a crack ********\********* in such a way that the volume arm won't go past crack[see above] on HIGH volume.
The audio IC could be shorted in high volume. Sometimes the audio IC is PART of a 64 (sixty-four) pin ckt. How do u test for that if u are not a techo'
Let someone take a peek at it.

Oct 23, 2007 | Bush DVD142RC 14 in. TV/DVD Combo

1 Answer

Limited blue


your tv has a fault in the matrix board the blue driver volt to the screen is missing or some dried up soldering at a pin should be seen by qualified , but sereen is ok , regards please don't forget to rate thx

Apr 28, 2007 | Toshiba TP43H60 43" Television

Not finding what you are looking for?
StarTech.com StarView SV211K 2-port KVM Switch Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top StarTech.com Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Alun Cox

Level 3 Expert

2678 Answers

mbowen171
mbowen171

Level 2 Expert

15 Answers

Are you a StarTech.com Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...