Question about Phones

2 Answers

Problem with B&O beocom 6000 ''extension'' no contact with base

Thanks to my grandaughter's infatuation with telephones she has managed to disable my beocom 6000 extension, bless her. The handset is a second 'phone remote from the base station and the display is showing ''alert view''. On pressing the ok button the message window displays ''no contact with base station''. I guess there is a simple solution in the instruction book..........if only I could find it?

I should be most grateful if you could offer a solution

Regards

Michael.

Posted by on

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I think you just need to re-register the phone to the base. Press the button on the base station (between the 2 charger pins) then go to the handset setup menu, scroll to register handset.

Posted on Jun 17, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,175 Answers

HI...

I have a client that wants his fixed so I went and got the OP manual at least. Here , cut n paste this link:

http://www.bang-olufsen.com/page.asp?ID=119&cat=Telephones&prodid=133&typeid=1

Cheers, Scott

Posted on Apr 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Uniden powermax 5.8 GHz not working


have you tried a hard reset. please leave the phone plugged off from wall power for one night and then try starting.

this may start the phone normally and problem will get solved many times.

thank you

Aug 12, 2008 | Uniden Cordless phone EXS9950

1 Answer

How do I add new phone to Pyramid wall charger for 6000 B&O phone which does not have a light


Might be best to read this article which explains the differences and similarities.

PSTN Bases Phone Compatibility Explained

The appropriate user guide to suit your system will be available on this site. Choose the correct model.
http://www.bang-olufsen.com/en/customer-service/product-support/accessories/phones/beocom-6000

Sep 13, 2014 | Bang Olufsen Phones

1 Answer

How do i get volume on my binatone 3325 handset


Press C/8 to unmute the microphone.

complete installations
Plug the power adapter
& line cord
into the base station.
Plug the power adapter into a 230Vac, 50Hz
mains socket, the other end of the line cord
into your telephone line socket.
Warning: Always use the line cord provided in the box.
Other line cords may not be compatible and may not work.
Warning: Only use the power adapter supplied.
Others will result in non-compliance with the safety
specification EN60950, and will invalidate any approval
given with this apparatus.
Warning: The Base unit needs mains power for
normal operation, not just for charging the handset batteries.
Installing and charging the batteries
Slide open the battery compartment cover.
Place the 2 batteries with the correct polarity,
as shown.
Slide the battery compartment cover back.
Put the handset on the base and charge for
15 hours before first time use. The handset
beeps when charging starts.
Warning: Only use the AAA size NiMH rechargeable
batteries.
If you have a Broadband Line
If you connect your telephone to a line with a broadband connection, you will need to
insert a micro-filter between the telephone and the telephone line, otherwise you may
get interference between the telephone and the broadband, which could cause
problems.
In a home with broadband, every telephone must have a micro-filter connected, not just the one at the telephone point that your modem is connected to.
If you need more broadband micro-filters, contact your broadband provider.

Connection and Conditions for use:
You can connect your phone to a direct exchange line (DEL) on a local
exchange with its own phone number; to an extension socket
connected to a DEL; or to an extension on an approved compatible
PBX. Do not connect as an extension to a payphone.
The ringer equivalence number (REN) of all equipment (phones, fax
machines, modems, etc.) connected to an exchange line must not add
up to more than 4, otherwise one or more of them may not ring and/or
answer calls correctly. This phone has a REN of 1, and most other
telephones have a REN of 1 unless marked otherwise.
Handset - Base Connection
1) When purchased, all handsets are already registered to the base unit
and should link to it when they are all powered up.
2) To use your cordless handset and base unit together, you must be
able to establish a radio link between them. The signal between the
handset and the base is in accordance with the normal standards for
a DECT phone: Maximum range up to 300 metres outdoors or 50
metres indoors. Be aware that:
> Any large metal object, such as a refrigerator, mirror or filing cabinet,
between the handset and the base unit may block the radio signal.
> Other solid structures, like walls, may reduce the signal strength.
> Other electrical equipment may cause interference and/or affect the range.
3) Do not place close to another telephone, a TV or audio equipment - it
may cause interference.
4) Out of Range warning. If you hear a warning tone during a call,
and/or the sound in the earpiece becomes faint or distorted, you may be
going out of range of the base unit, so move nearer to the base unit
within 20 seconds, otherwise the call may be cut off.

Jul 20, 2014 | Phones

1 Answer

Handset shows line busy


its not syncing to your phone the right way.

Aug 15, 2013 | HQRP Phone Battery fits BANG & OLUFSEN...

1 Answer

My Beocom 6000 table base unit no longer charges


If your base has a charge indicator on it and it indicates that the handset is charging when the handset is in the cradle, I would say you need a new battery. RadioShack sells a replacement battery for $22.00 at the following link

http://www.radioshack.com/product/index.jsp?productId=2815547&CAWELAID=107599274

If the charge indicator doesn't come on it is unlikely that it is the battery. You may be able to get the phone repaired by the manufacturer but it may be better and more practical to get a new phone.

Jan 07, 2010 | Phones

1 Answer

Want to disable Messaging on AT&T model 2462 2.4 GHZ 2 line Phone


AT&T's telephone website has manuals (in pdf form) for a vast selection of AT&T/Lucent branded consumer telephone products.

Here is the link to the 2462:

http://telephones.att.com/docMgt/public/art/277/2462_manual.pdf

According to page 31, there is a button on the base that will allow you to disable the answering machine for each individual telephone line.

Dec 23, 2008 | AT&T 2462 Cordless Phone

1 Answer

One one ring tone with incoming call..........


Make sure the ringer is on .
• Make sure the telephone line cord and power adapter are plugged in properly .
• The cordless handset may be too far from the telephone base. Move it closer to the telephone
base.
• There may be too many extension telephones on the telephone line to allow all of them to ring
simultaneously. Try unplugging some of them.
• If the other telephones in your home are having the same problem, the problem is in the wiring
or local service. Contact the local telephone company (charges may apply).
• Other electronic products can cause interference to your cordless telephone. Try installing your
telephone as far away as possible from the following electronic devices: wireless routers, radios,
radio towers, pager towers, cellular telephones, digital telephones, intercoms, room monitors,
televisions, VCRs, personal computers, kitchen appliances, and other cordless telephones.
• Test a working telephone at the telephone jack. If another telephone has the same problem, the
problem is in the telephone jack. Contact your local telephone company (charges may apply).
• The telephone line cord might be malfunctioning. Try installing a new telephone line cord.
• Remove and re-insert the battery and place the cordless handset in the telephone base.
• Wait for the cordless handset to synchronize with the telephone base. Allow up to one minute
for this to take place.
for more info download this http://www.vtechphones.com/docMgt/public/art/52882/6041_manual.i3.pdf

Apr 01, 2008 | Vtech Cordless 6041 Phone

Not finding what you are looking for?
Phones Logo

Related Topics:

5,037 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96467 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...