Question about Tag Heuer SLR Mercedes Benz Limited Edition (CAG2110.FC6209) Watch

1 Answer

How to set up time on TAG HEUER SLR CHRONOGRAPH ? what are the functions of the 2 boutons and 2 crowns ?

Posted by on

  • uaerc Apr 25, 2009

    i got the new calibre S version SLR and cant seem to change the time any ideas?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The crown at 3 o'clock is used to set the time and change modes. The crown at 9 o'clock is used to rotate the flange at the edge of the dial.
The A button at approximately 2 o'clock starts and stops the chronograph function. The B button at approximately 4 o'clock resets the chronograph.

Lap Timer: When the watch is displaying normal time, press the right side crown to switch to chrono mode (the hour hand will indicate CHRONO). This watch measures lap times, press A to start timing the first lap. Press A again to stop the first lap and automatically start timing the second lap (the hour hand will move to indicate you're on the second lap), and so on. You can measure up to 20 laps this way. When you're fininshed timing laps, press the right side crown to see the best lap time. To reset the lap timer, hold down B for 2 seconds. To switch out of chrono and see the normal time, just press the right side crown in.

Chronongraph: To time an interval that is not a lap, just follow the above instructions, but instead of pressing A to stop the first lap, press B and the watch will show the elapsed time to the nearest 1/100th of a second. Hold B to reset.

Crown at 9 o'clock: This crown rotates the inner flange at the edge of the dial and is used to measure total race time (i.e. the total of all the laps). Simply rotate the crown until the the little start trinagle on the flange is aligned with the minute hand. This way, the total elapsed time can be read at any time, similarly to how a rotating bezel works.

To set the time: Ensure the watch is not in CHRONO mode, if so, press the right side crown in. At this time pull the right side crown out until you feel a click.The position the second hand moves to indicates what is currently being set. If the second hand is at 9 o'clock, you are setting am hours, press A repeatedly to set am hours. Then press B and the second hand will move to 6 o'clock, pressing A repeatedly will set the minutes. So on for year (11 o'clock), month (12 o'clock), and day (1 o'clock).

Posted on Apr 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set the alarm on model wau111a tag watch


  • Pull out the crown to the alarm setting position. The crown is located on the right side of the face of the watch. Pull the crown out until "AL", the alarm indicator, is shown on the watch. Depending upon the model of your Tag Heuer Aquaracer watch, you will either pull the crown out in the first or second position.
  • Select the hours and minuets for the alarm. Once your watch is in the alarm setting position, press the bottom right button on your watch. This will enable you to select the hours and minuets that you want to set the alarm for.
  • Set your alarm. To begin setting your alarm turn the crown clockwise until the desired hour or minutes are displayed on your Tag Heuer Aquaracer watch. If you happen to accidentally pass the alarm time, turn the crown counter-clockwise the get back to the desired alarm time.
  • Save your alarm. When you are ready to save your alarm, simply push in the crown. Once your alarm sounds, to silence it press any button on your Tag Heuer Aquaracer watch.

  • Nov 06, 2014 | Tag Heuer Link Watches

    1 Answer

    Tag Heuer Chronograph Problem


    These are a top brand and any dealer should be willing to give you advice for free, drop in to a jeweller that sells them, and ask.

    Dec 15, 2013 | Tag Heuer Kirium Ti5 CL1181.FT6000 Wrist...

    2 Answers

    The chronograph hand of my TAG Formula1 starts at 2 seconds to 12 not at 12 o clock also after reset it stops at this point. What could be the problem?


    If you pull out the crown to the first stop, then press the start/stop button that should move the second had on one second per press. The reset button moves one of the other dials. If you pull the crown out to the second stop, the start/stop moves the minute hand on, and the reset button moves the other small dial round.

    Feb 19, 2010 | Tag Heuer Formula One

    1 Answer

    How can i make the date of my tag heuer formula 1 change automaticaly?


    To s e t t h e t i m e a n d d a t e
    Your TAG Heuer chronograph is fitted
    with a screw-in crown and safety seals
    which guarantee it to be waterproof
    to 200 m (660 ft).
    Position 0: Crown is screwed in
    (normal position).
    Important: The crown must be
    screwed in correctly to guarantee
    the water-resistance of the watch.
    Position 1: Crown unscrewed.
    To change the hour (change of time
    zone) or date quickly, unscrew the
    crown, pull it out to position 2 (quick
    corrector) and turn it in either
    direction. This mode allows you to
    change the hour and the date without
    any loss of minutes.
    The date changes each time the
    hour-hand passes midnight.
    To set the time, unscrew the crown,
    pull it out to position 3 (setting the
    time) and turn it in either direction.
    After setting the date or the
    time, push the crown back and
    screw in to position 0.

    Oct 10, 2009 | Tag Heuer Formula One

    1 Answer

    Hi there i have bought a second hand tag heuer carrera tachymeter,i dont have a user manual,but cant seem to get the chronograph functions to work ?


    Great watch! Operation should be pretty straight forward. The top button starts the chrono and stops it. The bottom button resets it. To calibrate the sweep arm into the right position pull the crown out to the first or second set position and press the start button until the sweep arm is in the start position you desire. This is typically 12:00 or 0.
    If your chrono is not working then have the battery checked. If the battery has been recently replaced then make sure the watch doesn't need to be cleared.
    I recommend you take this to a watch maker/technician who will be familiar with the service requirements of this model including resealing and pressure testing the watch to be sure it is sealed to its marked water resistance specifications.

    Thanks!

    Sep 20, 2009 | Tag Heuer Carrera Series Chronograph Watch

    2 Answers

    Tag heuer automatic series, how do you start the watch after purchasing?


    push the crown in if it is in the adjust position .then shake the watch around the auto mechanism sould start the watch

    Aug 23, 2009 | Tag Heuer Automatic Chronograph Series...

    1 Answer

    Tag Heuer CA 1211-RO Min. Hand resets to 59 Min.


    Unscrew the crown and pull out halfway. Use the stopwatch buttons to advance the hand to where you want it. Then push the crown back in and screw it down. You may need to pull the crown out all the way--I cannot recall which setting controls the minute hand and which the hour hand on the stopwatch function. This has to be done every time the battery is changed.

    Jan 23, 2009 | Tag Heuer Link Automatic Chronometer...

    6 Answers

    Tag Heuer Aquaracer reset red hand


    THANK YOU THANK YOU THANK YOU!!! I had a similar issue and this saved me!!!!

    Apr 14, 2008 | Tag Heuer Aquaracer Quartz Chronograph...

    Not finding what you are looking for?
    Tag Heuer SLR Mercedes Benz Limited Edition (CAG2110.FC6209) Watch Logo

    5,838 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Tag Heuer Watches Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18381 Answers

    The Knight
    The Knight

    Level 3 Expert

    72650 Answers

    Jimmy Accardi

    Level 2 Expert

    98 Answers

    Are you a Tag Heuer Watch Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...