Question about Car APS25CH Prestige 2 Button Remote Security System with Shock Se

1 Answer

The car arms but the alarm does not chirp - Car APS25CH Prestige 2 Button Remote Security System with Shock Se

Posted by on

  • Anonymous Mar 26, 2009

    car blue led light is continuously on and it won't chirp. I have a Honda Passport 2002 with Python 700 installed on it by Circuit City. I do not know where to go to have it checked.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Contributor
  • 19 Answers

Try turning your key on and flip the valet switch, your alarm is most likely in valet mode (youll know cause the led stays on) if that doesnt work, turn the key on and off then toggle thye valet switch 3x and that'll turn off silent mode. Good luck, Martin @ lessco electronics

Posted on Jul 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Hornet alarm doesn't chirp, activate, or go off anymore. I've tried to check the valet mode, but it doesn't do anything. The remote still locks and unlocks door's and it cranks.


My car alarm doesn't chirp all the time, but it still unlocks the ...

forums.anandtech.com > Social > Off Topic

AnandTech
Feb 3, 2003 - 11 posts - ‎7 authors
My car alarm doesn't chirp all the time, but it still unlocks the doors. ... Distributed Computing. ·, Security. ·, Social. ·, Off Topic ... The rest of the electrical systemseems fine. ... Just read the owners manual and find out to to re-enable the ... but like when I arm my alarm it arms but then it'll go off for no reason.

Alarm Troubleshooting Help Tips - Dr.Detail

www.drdetailshop.com/TROUBLE.html
When you try to start the car the alarm goes off.. It could be your battery. 3. Try to start no sound, nothing lights up, alarm doesn't work. It could be a loose battery ...

Viper Alarm won't chirp help!! - 12 Volt Forum : Car security ...

www.tintdude.com > ... > 12 Volt Forum : Car security / Convenience

Sep 11, 2006 - 7 posts
posted in 12 Volt Forum : Car security / Convenience: Hi I am new to this site ... Myproblem is when I lock it it won't chirp or roll my windows up ... If I hold the lock button the siren will go off,and if I press and hold the AUX my windows will go down. ... It won't chirp when activated or when I hold the arm button.Missing: hornet

How To program DEI Viper Python Avital Sidewinder Valet ...

? 3:34
https://www.youtube.com/watch?v=r01ntAXGxBw
Mar 10, 2011 - Uploaded by Lessco Electronics
hi I have the viper 7142v alarm system,tge problem is I only had one remote,I ordered a spare but ... My alarm only chirps when i am programming lock and unlock functions. it does not ... As soon as I connect car battery my alarm goes off. ... I obviously don't have a remote, and it doesn't have a valet switch.

Jan 06, 2016 | Vehicle Parts & Accessories

1 Answer

After I set alarm, it chirps once then 2 seconds later it chirps once again!!


That second chirp is a status alert letting you know a zone was not able arm yet. Most common reason is that the dome light its not out yet. It arms itself as soon as the trigger goes to sleep.

May 01, 2014 | Vehicle Parts & Accessories

1 Answer

Hi. I have a Viper 5701 alarm in my car. Arm and disarm goes very well with the control unit. But I cannot programming to pasive arming, always have to use de button in remote control to works. Is ther a...


Open door, turn ignition on then off. Press aand hold programming button until you hear one chirp. After you hear the chirp, release programming button, press and release button one then press and hold. You will hear one chirp. While holding the programming button, press lock button on remote to change option. One chirp is active arming(what you currently have), Two chirps is passive arming without locks, Three chirps is passive arming with locks. Turn ignition on to exit programming. Test system.

Jun 13, 2011 | 5701 VIPER 5701 2-WAY ALARM w/REMOTE START

1 Answer

The alarm light stay's on but the alarm does not beep or set


It sounds like your alarm is in valet. Open any dooor, press lock, unlock, lock. The LED light should go off and you should be able to arm the alarm with the chirps active.

Apr 06, 2011 | Viper Vehicle Parts & Accessories

1 Answer

My led light for my alarm stays on and the alarm dont work anymore but the button still locks?unlocks/and starts


Your system is in valet. To take the system out of valet with remote: open any door, press lock, unlock, lock. Now check the LED; it should be off. Close the door and arm the system to check.
OR
Turn the key on then off. Within ten seconds press and release the valet switch. The LED should be off now. Close the door and arm the system. The alarm should chirp to confirm that it is armed.

Nov 26, 2010 | Remote Start System

1 Answer

I have had my Viper system for some years now with never a problem, that is until yesterday. Now when I arm or disarm my system the horn does not chirp and the small red dash light stays solid red instead...


Your alarm is is in valet. to take the alarm out of valet with the remote: open any door. Press lock, unlock, lock. The LED should be off now. Close the door and lock the doors with remote. The alarm should chirp to confirm that it is armed.
OR
Turn the key on then off. Within ten seconds press and release the valet switch. The LED should be off now. Close the door and lock the vehicle with the remote. The alarm should chirp to confirm that it is armed.

Nov 26, 2010 | Remote Start System

1 Answer

My remote says no antenna. can not arm alarm.


REPROGRAM YOUR REMOTES USING THIS PROCEDURE:

REMOTE TRANSMITTER PROGRAMMING
Enter:
1. Turn the Ignition 'switch ‘OFF/ON’ 3 TIMES and stay in
ON position. Within 15 seconds.
2. Push the Valet switch 2 times and hold in on the 2nd
push, when a long chirp is heard then release the valet
switch. You are now in the Transmitter programming mode.
Program:
1. Press the Lock button on transmitter 1 until the siren
responds on Car with a confirming chirp; the first
transmitter is now programmed to Car.
Exit: Turn Ignition to 'OFF' position, or leave it for 15
seconds. 3 long chirps will confirm exit.
Note: If more than 4 transmitters programmed, the system
will only keep the last four.

Jul 06, 2010 | C3 RS6652W (NEW with 1 LCD Transmitters)...

1 Answer

I have a sola-larm 835T, the alarm is not recognising or responding to the signal from the key fob transmitter.The alarm is armed and i cannot cancel the immobiliser.New batteries are fitted. Any idea's...


You need to disconnect Battery. On reconnecting, you will hear a "chirp" from the Alarm System. Within 2-3 seconds, press the button on your transmitter, and you should hear the Alarm respond correctly.

Aug 09, 2009 | Vehicle Parts & Accessories

1 Answer

I have a stellar alarm everything works but when it is armed the lights flash and it chirps for no reason like it is to senstive. What is my problem? It's on a 1995 325is BMW I checked but don't see any...


what is happening is your dome light stays on for 30 seconds after locking your doors and the alarm is sensing that a door is still opened and is giving you a warning chirp that a zone is still opened. Some alarms will have a bypass in the menu setup that will bypass the open zone for 2 min after arming. check your owners or installation manual if it is indeed the case.

Aug 08, 2009 | Alarm W/ Remote Start Accessories Car...

Not finding what you are looking for?
Car APS25CH Prestige 2 Button Remote Security System with Shock Se Logo

1,367 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audiovox Vehicle Parts & Accessories Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13213 Answers

Brad Brown

Level 3 Expert

13732 Answers

Are you an Audiovox Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...