Question about Zodiac BARRACUDA G3 IN-GRND CLEANER

1 Answer

Baracuda G3 zodiac Clings to bottom or sides moving slowly

The cleaner clings to bottom of the pool or sides moving and oscillating
but moving much slower than normal

Posted by on

  • sikblu22 Apr 02, 2009

    Bought the Barracuda G3 and am having troubles with it not cleaning the pool and getting tangled up with the hose at vacuum port, the hose is the length of the pool and the vacuum adjustment has been toyed with up and down.. Please advise

  • Anonymous Mar 19, 2014

    It is running very slow

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 125 Answers

Here is a link to the Technical Support at Baracuda. this should be able to solve your problems. initially sounds like maybe too much suction.

Posted on Feb 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Barracuda G3 manual


http://www.zodiacpoolsystems.com/Products/Cleaners/Suction/Zodiac-G3.aspx

Bottom of the page labeled downloads

Apr 08, 2013 | Zodiac Baracuda Zippy Pool Cleaner

1 Answer

Ihave pulled my baracuda apart and have no instructions on how to put it back together.


Below is a copy of the users manual for these pool cleaners from the Zodiac website. It has detailed instructions and illustrations that will show you how to put the cleaner back together.

http://www.baracuda.com/resources/manuals/TL-2050.pdf

Jan 11, 2011 | Zodiac Baracuda G3 Automatic In Ground...

1 Answer

How to put on the pressure regulator


Here is a copy of the users manual for the G3 pool cleaners from the Zodiac website. Any set up and installation instructions that you need should be in the manual.

http://www.baracuda.com/resources/manuals/TL-2050.pdf

Jan 08, 2011 | Zodiac Baracuda G3 Automatic In Ground...

1 Answer

I have a Zodiac Baracuda G3 pool cleaner once the the pump switches off at night the next morning creepy does not sit flat on the bottom of the pool the front side stands up in the the air if you lift the...


It sounds like your house weights need to be adjusted. When the pool cleaner is resting, it should always sit at a 45 degree angle on the bottom of the pool. If it stands up on the front side, try sliding the weight away from the cleaner head. You may need to make several small adjustments to get the balance right, but this is almost surely your problem. Here is a copy of the users manual if you want to read more about hose weights and balance:

http://www.baracuda.com/resources/manuals/TL-2050.pdf

Oct 11, 2010 | Zodiac Baracuda Zippy Pool Cleaner

2 Answers

Baracuda G3


Check your pool cleaners hose to make sure that it is not becoming tangled. Storing the hose in a coiled position will cause this. If it is not moving and it is not the hose, you could have a leak in a connection somewhere. If the cleaner is getting adequate suction, it should be moving. Try adjust the hose weights to make sure the cleaner is at a 45 degree angle to the pools floor.

Jul 06, 2010 | Zodiac Baracuda G3 Automatic In Ground...

2 Answers

My baracuda G3 stop working is not pulsating and therefore not moving. I checked the suction and the hoses even the diaphram everything looks ok.


If you have suction at the bottom of the cleaner, there has to be a problem with the diaphragm. I would remove it and recheck.

Feb 01, 2010 | Zodiac Baracuda G3 Automatic In Ground...

1 Answer

My baracuda is pulsating and moving but surfaces


The control should be below the water, and if you cut the suction down that should help with the cleaner.

Dec 22, 2009 | Zodiac BARRACUDA G3 IN-GRND CLEANER

1 Answer

I installed this weekend, but the g3 does not move forward, instead it goes backward, how do i fix, or should I?


i assume you mean 'on bottom' pool cleaner? let it run a full cycle, see if it reverses and goes forward. if not get the manual and re-check your programming set-up.
good luck!

Oct 06, 2009 | Zodiac Baracuda G3 Automatic In Ground...

1 Answer

Zodiac g3 doesnt move


Diaphragm ripped. Replace with new one

Jun 09, 2009 | Zodiac Baracuda G3 Automatic In Ground...

Not finding what you are looking for?
Zodiac BARRACUDA G3 IN-GRND CLEANER Logo

968 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zodiac Pool & Spa Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

john h

Level 3 Expert

8286 Answers

Jay Finke
Jay Finke

Level 3 Expert

1224 Answers

Are you a Zodiac Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...