Question about Xerox Phaser 6110MFP All-In-One Laser Printer

2 Answers

Xerox 6110 MFP scanner locked

How do I unlock the scanner

Posted by on

  • Anonymous Mar 04, 2009

    How do I unlock the scanner

  • Anonymous Mar 04, 2009

    I have the same problem but there is no release button on the left side of the device

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

The Xerox 6110 MFP has a green 'lock/unlock' slider on the "roof" of the "out" paper tray (under the front control pannel assembly); see images below. When slide to the back, it locks the scanner, and to the front unlocks it.
xerox 6110 MFP scanner locked - 75884d7.jpg Front of the Xerox 6110MFP howing paper output tray and control panel.

7020767.jpg Xerox 6110MFP showing the output paper tray and the 'green' scanner slide lever in the roof of the tray.

Posted on Mar 15, 2009

  • zurokovec Oct 09, 2010

    I use MFP Twain driver fromhttp://www.scanworkssoftware.com/twainim... and it works great with this Phaser 6110 MFP

  • angelbdavis Apr 29, 2011

    THIS WORKED FOR ME. BUT REMEMBER TO RESTART THE PRINTER FOR IT TO WORK

×

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 23 Answers

On the left side of the device should be a mechanism to release the scanner

Posted on Feb 27, 2009

4 Suggested Answers

  • 1 Answer

SOURCE: how can you reset the waste toner counter?

Exactly the same problem over here ;-( When replacing the toner recently i forgot to switch of the power, so no reset. I can't find the reset option in the menu, resetting aal settings did not solve my problem.

Posted on Feb 23, 2010

  • 525 Answers

SOURCE: Please, send me the firmware for Xerox 6110 MFP

firmware to have changed only very extreme case!!! no to reset image unit

Posted on Jan 19, 2011

giphtunder10
  • 1 Answer

SOURCE: My Xerox phaser 3300 mfp

Look under the scanner area-Where the finished paper copies come out- There is a little green Tab. Pull Green Tab forward.

Posted on May 21, 2012

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I un-lock the scanner on a Brother MFC 7420?


Unfortunately, the MFC-7420 doesn't have a physical lock switch. You need to turn off the all-in-one and wait for the unit to clear its memory. If the error recurs after you press the power button again, wait 30 minutes and try again. (Note: you will lose any faxes that are in memory. See the User Guide page 11-5 to save this information.) You can find the manual on the Brother support page for the MFC-7420: https://www.brother-usa.com/support/ModelInfo.aspx?R3ModelID=MFC7420 . Click on the Manuals & Documents tab. Then click on the Manuals on our Online Solution Center for the English version of the manual. The direct link to the User Guide is currently: http://download.brother.com/welcome/doc000387/ALLFB_UsaEngUsr_B.pdf .

You can also try unplugging the all-in-one for several minutes to reset the error codes. If the error persists, contact Brother if the MFC-7420 is still under warranty (1 year). If it isn't under warranty, consider replacing the unit. The repair costs may be unreasonable.

I hope this helps.

Cindy Wells

Jan 09, 2017 | Brother MFC-7420 Printer

1 Answer

My 202 doorbell does not "react" if the button is pushed AFTER my neighbor unlocks his car by using his remote key. Can I change the frequency range of the doorbell?


look for a cover that has small switches under it. You can change frequencies there. You must match the door button the same way .

Nov 19, 2014 | Office Equipment & Supplies

1 Answer

Hp laserjet m1522f error 5 turn off and on


Hi, Error 5 is a Scanner error. When turning the printer on, have the lid up so you can watch the scanner movement. Does it move smoothly? It should go through a warm up and you should be able to watch the scanner movement. If there is a problem with the scanner, there isn't a lot you could do except. The service manual says the scanner assembly should be replaced. If it was my printer, I would try to take a closer look at the scanner assembly and check to see if the scanner unit is bound up somewhere, or maybe a drop of 3 in 1 oil on the scanner rails. Let us know what happens.
thanks

Oct 02, 2013 | Office Equipment & Supplies

1 Answer

Canon pixma mx 922 will not scan


This happen due to poor version of drivers.Make sure that you install latest drivers. If you don't have then download it from PIXMA MX922 Canon Software Driver
For more help or guidance check Canon MX922 Manual English

Jul 28, 2013 | Office Equipment & Supplies

3 Answers

HP Laserjet 3330. Scanner bulb warming up doesn't go away. I have done the "solution 1" as discribte but nothing is happening. It goes like: - i put the power on, hewlett packard is flashing, the...


How does the bulb look? Is it bright or kind of dim. The bulb warming error is designed to halt use of the machine until the scanner bulb reaches the correct output level. As these are basically a flourescent tube, they will dim over time and at a certain point they will not generate enough light to enable proper scanning. If the bulb is dim, it will require replacement.

Mar 14, 2011 | Office Equipment & Supplies

1 Answer

Why does canon MP258 printer with scanner can't scan japanese yen paper bill amount 10,000. I tried it over 10 times but it stops,. And when i tried US paper bill, it works well. I need some explanation...


When you scan with any scanner it utilised the software with "Optical Character Recognition functions, usually abbreviated to OCR -> OCR is a field of research in pattern recognition, artificial intelligence and computer vision." to scan and record the scanned object, sometimes it does not or cannot recognise certain symbols or characters because of man made software & hardware have its limitations too.

Hope it helps.

Nov 12, 2010 | Office Equipment & Supplies

2 Answers

HP printer psc 2210 all in one


Chances are that you didn't lock down the scanner when you moved the unit. You can attempt to open the unit and move the scanner bar manually to reset it. HPs are very difficult beasts when it comes to their power up check out. It must be fully functional...including all cartridges...to work in most cases. Good luck.

Dec 20, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
Xerox Phaser 6110MFP All-In-One Laser Printer Logo

3,754 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...