Question about Vtech 5867 Cordless Phone

1 Answer

How do I get a new manual" I need it when I have trouble.with my phones like today couldn't get a dial tone.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 90 Answers

3 Suggested Answers

  • 1 Answer

SOURCE: GE portable phone model # 26928GE1-D No dial tone-installed new battery still no tone

what does it mean what your phone is out of range

Posted on Sep 06, 2008

  • 50 Answers

SOURCE: GE portable phone model # 26928GE1-D No dial tone-installed new battery still no tone

That isn't a whole lot to work with. Get a working phone and take the cord out of the base of the GE and plug it into the working phone.
If the working phone gets a dial tone, look into the modular receptical on the GE base and see if the contact wires aren't out of place.
If you don't get a dial tone on the working phone, try changing the connection cord between the phone and the wall. Also look for the same problem in the wall receptical as discribed above for the GE base.

Posted on May 28, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2 problems. 1. The orange message light will not stop flashing no matter what I do. 2. Some how the system was switched from touch tone to dial tone. I can't seem to that switched either.


Resetting the voice message waiting indicator
When you receive a new voice mail message, the new message LED on the top of the handset flashes. In the event your message waiting light gets out of sync with your phone company's
voice messaging system, you can manually reset it back to the "No messages waiting" state.
1. Press and hold FiND on the base for five seconds.
Note: The handsets connected to the base will start to beep, however, keep pressing for five seconds.
2. A beep sounds and the message alert tone is reset.
Changing the dial mode
Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most base networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company uses pulse dialing, you will need to change your phone's dial mode. If you don't get a dial tone or can't connect to the telephone network, please follow the steps below to modify your phone's settings:
1. Press MENU/SELECT.
2. Select the Global Setup menu, and then the Dial Mode submenu.
3. Scroll to highlight Pulse.
4. Press MENU/SELECT. You will hear a confirmation tone.
If you ever need to change the dial mode back to tone dialing, follow the same procedure, but select Tone in step 3.

Finally for future ease of use, here is a link to the user manual were I copied the above information from:

http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DECT1580-3om.pdf

Jul 21, 2011 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

No Dail tone on Line 2. We have 4 lines in total. Today when we pick up line 2, it's open and there is no dial tone. How do we fix this?


It's a good bet that the line is dead before it comes into the building. Call your service provider and start a trouble ticket.

May 05, 2010 | NorStar T7316E Corded Phone

1 Answer

One light blinking on the lingo box. no phone service today no dial tone may have a connection problem. i have been on my cell phone for over 2 hours trying to get help. service is not good today. please...


I think you need help from your telco, not from me. This looks like a local loop problem if you have no dial tone. Call your telco and say, "No dial tone, no internet". They will dispatch repair..

Jan 09, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

C6180 FAX UNABLE TO SEND OR RECEIVE


check the the phone line, The fax sinal need good clear. Surely,plug the phone-line is rigth line socket. If you do that all, the broblem is still happenning,need to change "relay" on moderm fax board.

Jul 27, 2009 | HP Photosmart C6180 All-In-One InkJet...

2 Answers

Need to change phone back to tone dialing


Here's what the manual says: Changing the Dial Mode (Tone or Pulse Dialing) (HS1 only) Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most phone networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company uses pulse dialing, you need to change your phone's dial mode. If you don't get a dial tone or can't connect to the telephone network, follow the steps below to modify your phone?s settings: With the phone in standby, press and hold [cid/menu]. Press [vol/ / ] to move the pointer to select DIAL. Press [select/channel] to set the phone to pulse dialing. Press [end]. Return the handset to the base. The handset communicates the new setting to the base, and the base activates the setting on any other handsets. Hope this helps out. K

Jun 05, 2009 | Uniden 2.4 GHz Cordless Phone System

1 Answer

New phone has been set up. I can't get a dial-tone from either handset. What do I do?


Make sure the dial tone is coming into the house at the phone company's "DEMARC" after that is good then trouble is just inside the wiring in the house

Nov 20, 2008 | Lands Phones

2 Answers

No dial tone


Have you tried a known good phone in the jack, if that doesn't work take the phone to the demarc box provided by your phone company and open the door on the box. Under this door locate the mini jack and disconnect it, then plug your known good phone into that jack. If you get no dial tone at this point, then it isn't being provided by the local phone company so it's their trouble. Thank you. Jerry

Dec 18, 2007 | GE 26998GE1 Cordless Phone

1 Answer

Dial tone in fax mode


Is the phone wire from the wall jack plugged into the slot in the back of the machine marked "line" and not "phone"?

Nov 14, 2007 | Lexmark X9350 All-In-One InkJet Printer

1 Answer

Fax dial tone


sure...check the line, with a phone..do you have call waiting or something like that enabled..that can cause some issues, with the tone interruption to the internal modem.

Nov 14, 2007 | Lexmark X9350 All-In-One InkJet Printer

Not finding what you are looking for?
Vtech 5867 Cordless Phone Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vtech Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

4946 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Are you a Vtech Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...