Question about Bulova Watch
MENS CROTON CHRONOGRAPH ALARM DATE WATCH CC311098BUWH
I can't figure out how to set it. Help!
good after noon ! press the adjust button hold it up to 3 second when the digit is blinking thats time to set press the mode to select the digit that you want to change after that press the stert or reset button to change no digit ! thank you ! god bless !
Posted on Aug 29, 2008
SOURCE: Sector 250 Chronograph Alarm
the middle dial on the right side of the watch is used to switch from watch settings to alarm settings..
pull the middle dial out to put it in alarm mode.
To set alarm:
-pull the center knob out.
-with it out you can now use the bottom (right) knob to set the alarm.
-pull the bottom right knob out one notch
-turn the knob clockwise or counter clockwise to set the alarm time
-push the knob back in (all the way)
the alarm is now set
if the center (right) knob is pulled out the alarm is ON
if the center (right) knob is pushed in the alarm is OFF
I have owned this watch for about 10 years now and love it.
the past few years the chronograph buttons (on the left side of the watch) were not working well rendering the chronograph and count down timer functions unusable.
repairing a chronographs is expensive and watch makers usually charge several hundred dollars which is not a feasible fee for a watch of this value so i decided to open it up my self and clean it up and that did the trick.. its working like new!
enjoy the watch!
Posted on Jan 09, 2009
Tips for a great answer:
Jan 16, 2016 | Invicta Reserve Mens Arsenal Swiss Quartz...
Jul 05, 2015 | Croton Watches
Jun 06, 2014 | Kenneth Cole Watches
Feb 25, 2014 | Croton Watches Croton Nivada Grenchen Mens...
May 04, 2011 | Elgin Calendar Day/Date w/Crystal Goldtone...
Apr 01, 2011 | Croton Watches
Jul 29, 2010 | Croton MENS AQUAMATIC SPORTS WATCH_ BLUE...
Jan 27, 2010 | Croton Ladies - LADY'S ROLEX-STYLE DIAMOND...
Jan 05, 2009 | Bulova Watch
Sep 03, 2008 | Watches
84 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: