Question about Yukon Fitness Equipment Exercise Treadmill - Inertia Runner X6.5 Treadmill

1 Answer

Temporary lost power. When power resumed treadmill will not restart.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 95 Answers

You need to check the fuse in the lower section. Once you have done that you will need to call yukon fitness and order a lowert board from them. This is an easy repair you can do your self.

Posted on May 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The fuse is going off, and the treadmill works temporary, but after a few minutes will turn itself off


The motor drive circuit or the motor is faulty. Also you have to check the carbon brush of the Motor .
If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Oct 09, 2015 | Bowflex Treadmill Series 7

1 Answer

Speed changes on it own


speed controller is malfunctioning

Dec 11, 2013 | Weslo Epic 10pi Rear Roller For Model...

1 Answer

I have an Ifit treadmill. I was changing speeds and it turned off and won't restart. It beeps when i turn it on but no lights on console.


Power issues with ProForm treadmills fit into two categories: the power does not turn on or the power shuts off when using the treadmill. If the power will not turn on, make sure that the treadmill is plugged into a working power outlet. In addition, you should use a single-outlet surge protector for the treadmill. Single-outlet surge protectors protect the machine from any voltage changes that may occur in your home.

If the machine is plugged into a working outlet, make sure the safety key is in the keyhole on the console. If the safety key is not plugged into the machine or if it is pulled out during operation, the treadmill will not operate.

Finally, make sure the circuit breaker located on the frame near the power cord is set to "Reset." The circuit breaker is set to "Reset" if the top of the button is pushed in. When the breaker is tripped, push it back to the "Reset" position and wait five minutes before powering on the treadmill.

If the ProForm treadmill shuts off during operation, check the power cord and circuit breaker as described above. You can also try removing and reinserting the safety key.

Increase Engine Horse Power.

Jun 02, 2012 | Proform Exercise & Fitness

1 Answer

My question is, last night, I set the speed to 5mile/hr, the treadmill automatically stopped after 12mins( the belt stop, power was on). and I can not restart it immediately, Then after 5 mins, the belt...


A treadmill will shut down from to much friction which is due to high motor current because the walkbelt and deck are not properly lubricated. I would recommend replacing the motor controller,walkbelt,deck and applying .5 oz of lubricant on the deck every 3-6 months or 100 hours of use. This will extend your treadmill's life many years.

Jul 08, 2010 | Nordic Track /proform Treadmill...

4 Answers

Lost safety key


I have a Weslo Candence treadmill and I too lost my safetly key and I recently folded up a leftover valentine's card from my child's kit box and to my surprise it worked. I just folded to the size of the key and inserted and the treadmill started up with no problem. YEAH!

May 18, 2010 | Cadence Weslo 200cs Safety Key...

1 Answer

How do I fix my Endurance Treadmill TF3i Err7 problem? I stopped during operation.


Unplug unit remove motor shroud check connections on lower board (incline board). I believe their is a 3 amp fuse in circuit check with multi meter to see if open replace fuse power up unit and if it blows the fuse then replace incline motor and if not, then use engine mode press stop then Incline + or - to force incline up to max incline then bring it down to 0 then turn off power then wait 10 seconds then hit power on then if error does not appear then hit start and resume using unit. If the procedure above does not activate unit then replace board.

Apr 15, 2010 | Endurance T3 Treadmill

2 Answers

Proform 860 QT doesnt have power


There's a little breaker near the main on/off switch that has tripped. Re-set the breaker. (also check the main on/off switch, typically near where the power cord enters the treadmill...

Mar 13, 2009 | Exercise & Fitness

Not finding what you are looking for?
Yukon Fitness Equipment Exercise Treadmill - Inertia Runner X6.5 Treadmill Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yukon Fitness Equipment Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6364 Answers

Sportsmith LLC
Sportsmith LLC

Level 3 Expert

914 Answers

Tom Chichester

Level 3 Expert

26142 Answers

Are you a Yukon Fitness Equipment Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...