Question about D-Link Dlink DI-514 Air Wireless 2.4 GHz Router (A0177337)

1 Answer

I can not aces in my ruter i frogoth my user name end pasword please help me

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 121 Answers

Hello,

My name is Armymason, I have the solution to your problem. You need to reset the Router http://office.manualsonline.com/manuals/mfg/dlink_systems/di514_1.html here is the manual in it should explain how to do a hard reset. I believe for that model you need to have it unplugged and use a pin to hold in the reset button, while holding the reset plug in the router and wait 5 seconds before releasing the reset button. Now it should be set back to factory and all you have to do is enter in the default user name and password. Of course doing this you will have to reset all your settings.

If this solution isnt satisfactory, I suggest using our Premium service.
Thanks,
Armymason

Posted on Feb 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mp252 Audio Codes problem


maybe admin/1234 or you did not reset it, hold the reset button longer

Apr 16, 2014 | Routers

1 Answer

Stuck on router settings


call your ISP and ask them to try reset ur pw and ask them to test the new pw on there test machine. if it works at their end but not at ur modem, it might be a modem issue...
try reseting the modem, if still not working... need to try another modem

Jan 05, 2014 | Belkin Routers

1 Answer

I have 2 laptops. One with windows xp that is connected wirelessly to the router. The other runs windows vista and its connected wirelessly to the network but it says unidentified network and wont connect...


check your ruter .. log to your rutter end see what is in ssdi.. what nameing? see securtiy also... check your wirreles adapter , maybe new driver for vista needs o be install

Feb 25, 2011 | Belkin Basic Wireless Router

1 Answer

How to change a password in my ruter dl 600


to change the password on your router if you don't know it you will have to factory default the router and re-configure it. HERE is the manual with the default settings. page 4 shows a picture of the reset button and the default IP address is 192.168.0.1 and the default user name is Admin and the password is blank by default.

Jan 12, 2011 | D-Link DIR-600 Router

1 Answer

Have taken over this system and need to reset user password as we need to programme the system


There is a small hole somewhere on the back (usually). Get a needle or a staple pin it down to push the button inside the hole. Hold the button 30 seconds to reset the ruter. After the reset you'll have to set it again as it is reset to its defaul user settings (user, password etc). Be sure that you have all the necessary info - IP adress to set it up and default user and password for your ruter (this info is in the manual, a Cd or a sticher on the bottom side of the ruter)

Aug 05, 2010 | Routers

1 Answer

How can i reset my user name & pasword ??


Hi,
If you don't know the user name password of the router then try the default one. For D-link routers the default user name is admin and password is blank (means nothing, leave it empty). If this doesn't work or if you have changed it in past then to put it back to factory settings you need to reset the router.
To reset the router please try the following steps:
1. At the back of the router you will find a reset hole. 2. Press and hold down the reset button for 15-20 seconds with the help of a pen or a paper clip.
Note: Router should be turned on while doing the reset. Also, after reset you need to reconfigure the router means the internet and wireless settings.
Please revert in case of any issue. :)
Regards,
Rashish

Aug 02, 2010 | D-Link Routers

2 Answers

Need Code


connect your router to computer with ethernet cable.
Then you can access it with following link.

http://192.168.1.1
or
http://192.168.0.1


type user as "admin" and password as "admin" or blank or "password"
Then you can see configuration page of router.Click on wireless and If you want secure router then enable WEP security then add new code it is your password key for connect wi fi.
Let me know if you need further assistance.

Nov 18, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Sandrew


connect ethernet cable of your computer lan card to ports on linksys router ethernet port.
then acee in browser tis link
http://192.168.1.1
then username is admin pasword also admin.if not login then try username blank and pasword is admin
then set dynamic ip adreses enable .asl oset in your tcp /ip properties in lancard.set it to obtained dynamic ip aderss auto.aslo make sure in link sys that dns also automatic geting from isp.
thatys it.
u get INTERNET NOW FROM YOUR ISP.

Oct 23, 2008 | NetGear WGR614 Wireless Router

1 Answer

Can noy configure my linksys route


Hello, If you haven't changed from default, the linksys address is 192.168.1.1 It will them prompt for a user name and password. Default would be "admin" for User name. Click enter and if it doesn't work enter "admin" for both user name and password. Hope this helps.

Mar 10, 2008 | Linksys BEFSR41 Cable/DSL Router W/4 Port...

Not finding what you are looking for?
D-Link Dlink DI-514 Air Wireless 2.4 GHz Router (A0177337) Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a D-Link Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...