Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Control lock is always on on my Whirlpool duet Ht washer.

I did rtry yo unplug from the power outlet, but didn't help.Nothing else is
working.If i open the door and press door switch other lights might go on, but none of the settings can be changed.

Posted by on

  • 1 more comment 
  • eugene rogov Feb 26, 2009

    My washer doesn't have end of cycle signal button

  • eugene rogov Mar 03, 2009

    Thank you very much it's working now

  • jeniferweyer Mar 05, 2009

    i just got a duet washer and the control lock is stuck on and it wont let me do anything... i unplugged it too but it comes on when i plug it back in

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hold the 'end of cycle' signal button for 3 seconds.

Posted on Feb 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool Duet Sport Model WFW8300SW0 basket won't


The following list of codes indicates an electronics communication problem with the washer: - Duet HT washer - F01, F03, F06, F11, F23, F24, F27, F28, F29, F30, F31, F32, F35, F42, F61, F62, F63, F64, F65, F70, F71, and F99

If Pause/Cancel does not work:
  1. Unplug washer or disconnect power for one minute.
  2. Plug in washer or reconnect power.
  3. Re-select the cycle and press Start.
NOTE: If the error remains on the display, call for service.

I would first replace the door latch/lock assembly, a number of users have and it fixed the F-11 error code completely. Its the cheapest part for this problem.

Hope helps.

Jun 27, 2011 | Whirlpool Duet Sport HT WFW8400TE Washer

1 Answer

I have a whirlpool duet HT. The control lock botton is on. So the washer will not start it does nothing. I unpluged it, hold in the unlock door botton nothing works. The door opens and close I just...


Hello Welcome to FixYa here is the answer your searching for..Press and hold the "End of Cycle Signal" button for approximately three seconds until the "Control Locked" indicator light shuts off. The control panel is now unlocked. If this was helpful please rate me Thanks :)

Jun 12, 2011 | Whirlpool Washing Machines

1 Answer

MY WHIRLPOOL FRONT LOADER WASHER JUST QUIT WORKING. IT HAS LOST ALL POWER. THE DOOR WILL NOT EVEN OPEN. PLEASE HELP?


I've worked on similar models with all manner of problems. Try unplugging the machine from the electrical outlet for about 30 seconds then, plug it back in. This will "re-boot" the control board. If it doesn't work, I'd say the control board is bad.

May 06, 2011 | Whirlpool Duet Sport HT WFW8400TE Washer

2 Answers

Duet ht washer control locked. How do I unlock it? Really need your help


Hello & Welcome to FixYa


This is a common issue with Whirlpool Duet washers however, your whirlpool duet washer can be reset to resolve the control lock problem. Press and hold the END OF CYCLE/CYCLE SIGNAL button for 15 seconds to reset the control. Please get back to me if you have any other questions.


Kevin

Apr 25, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Duet HT GHW9300PW4 - The control lock is on


Hold down "end of cycle" button for 3 seconds.

chrisxx

Jun 03, 2009 | Whirlpool GHW9300 Duet Washer

1 Answer

Whirlpool duet ht wouldn't start


remove the lower front panel,3 screws,side up and off,there is a tech sheet inside on the panel that should help you ,let me know what you find-mike

Oct 18, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool Duet WFW9400S - Nothing works but lock button


YOU HAVE A PROBLEM WITH THE CONTROL PANNEL. REPLACE CONTROL PANNEL AND YOUR PROBLEM WILL BE RESOLVED

Jun 01, 2008 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Control Lock is on, how do I reset the machine?


Press and hold down "end of cycle" button at right side of panel for 3 - 5 seconds. This is the child lock feature, do it again and the machine locks.

Dec 25, 2007 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool Duet HT


Mine just did the exact same thing. I unplugged it, then plugged it back in, and it worked perfectly. Good luck!

Dec 09, 2007 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...