Question about Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+

1 Answer

Keypad for chamberlin garage door opener stopped working

For some reason, the keypad for our garage door opener stopped working. I replaced the battery and when I try to key in the number, there is a non-stopping flashing light lighting the keypad. I did put in new light bulbs for the garage door opener, but I don't see how that can impact the keypad. Any help would be appreciated. Thank you.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 112 Answers

You need to reprogram the keypad. Press and release the learn button on the back of the motor. Within 20 seconds, press your four digit code into the keypad and press and hold the enter button until the lightbulb on the motor blinks once. You are finished.

Posted on Feb 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Schematic for chamberlin 1/2 hp garage door opener model # 139.536006


There are no schematics available for garage door openers. Post your problem and we may be able to help.

Oct 15, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

I have 1half h\p chamberlin garage door opener


Unplug the opener and remove the bulbs. Use a small screwdriver to pull out on the center contact in the socket. Make sure you are using standard bulbs.

May 10, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

I have 1half h\p chamberlin garage door opener


Unplug the unit and remove the bulbs. Using a small screwdriver pull out on the center connection in the socket.

Apr 03, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Chamberline 1/2 hp belt drive opener that stops opening


It sure sounds like a broken spring. Sometimes the break can be difficult to see. How heavy is the door to lift manually. This will give you a good idea.

Jun 15, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Door opener will close door but will not open it chamberlin model 7200


IF THE DOOR WORKS PROPERLY - MANUALLY

TRY ADJUSTING THE UP SENSITIVITY.

IF IT IS HARD TO LIFT OR CATCHES ON ANYTHING - YOU NEED TO FIX THE DOOR.

HOPE THIS HELPS

Apr 21, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Remote/homelink and touchpad problem


Your keypad is not the same "generation" as your remotes. You operator will work with your security plus remotes or your old keypad but not both. Yor cheapest solution is to replace your keypad.

Feb 06, 2009 | Sears Craftsman LiftMaster Chamberlain...

4 Answers

2 different openers stopped working by remote at the same time


Both the older genie and a newer chamberlain (3-4 yrs old) both run on 390Mhz frequency. sounds like you will have to change your receivers on both operators (365LM 315Mhz) then get 3 button remote so you can program both doors on one remote.

Jan 01, 2009 | Sears Craftsman LiftMaster Chamberlain...

Not finding what you are looking for?
Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+ Logo

503 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sears Garage Doors Experts

Al Clark

Level 2 Expert

290 Answers

Cindy Wells

Level 3 Expert

4762 Answers

Pieter Vleeshouwers

Level 3 Expert

1431 Answers

Are you a Sears Garage Door Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...