Question about Xerox 5830 Copier

2 Answers

U7-1 how can i solve it

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 239 Answers

A worn out copy cartridge can cause this problem. It is the PR timing belt is worn out. If the edge of the timing belt is ok, the exposure lamp under the machine is not working good. This lamp is located above the copy cartridge, and it provides light to the timing sensor so it can read the hole on the timing belt. The bad timing sensor itself can cause these types of problems.
If this light is ok, a broken copy recieving unit can cause these types of problems. It cracks and hangs .

The other area that can cause problems is with the developer motor. Either the linkage is getting stuck, or the belt is so worn out it will not drive the xerographic drive process. Sometimes the motor itself will bind inside, the gears inside the motor can fail.
The main board can cause these problems, but usually it is realiable.
Good luck.

Posted on Oct 26, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Xerox Master
  • 990 Answers

Hello sir; you have a bad copy cartridge, replace it !

Posted on Feb 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I solve Kyocera KM-1650 error code C6400


Usually these are just software issues which can be solved by uninstalling the old one and reinstalling it. Cleaning the system with a cleaning utility of all old unwanted files, links etc may help solve the issue. Restoring your system to an earlier date when you didnot have any issues will also solve the problem. Especially in Windows Xp.

May 12, 2014 | Kyocera Mita KM-1650 All-In-One Printer

1 Answer

I have IR 4570 error code E0000001-0002 i am reset this function this but this will not solve please help me


If you have resr the error code in service mode and it did not clear.... Odds are you are going to have to replace the upper fuser heating unit with a new fuser film or you may want to replace the whole fuser unit..... The heating element is shorting out...... Good Luck

Dec 25, 2011 | Printers & Copiers

1 Answer

How do I solve error code 0002 on my epson pro 9800 maitenance error code 0002 unable to print


tomas
how do I solve error code 0002 on my epson pro 9800 maitenance error code 0002 unable to print
Solve this problem:

Aug 02, 2010 | Epson Stylus Pro 9600 InkJet Printer

1 Answer

Indicate h 4


When this copier power abnormal or heater abnormal then show H4
Solve: # interrupt C interrupt press 14 press start key if it is power abnormal then solve if you not solve you must be change Heater Lamp.

Mar 31, 2010 | Sharp AR-5320 Black and White Copier

1 Answer

Red light on after changing ink


Perform the following procedure:
n Press the ink cartridge replacement button until the print head has moved to the change cartridge position
n Lift the lid that holds the cartridge (do NOT remove cartridge) and press down immediately. Then press the ink cartridge replacement button and allow the cartridge to charge the print head. Do NOT switch the printer off until the printer has finished charging.
Does this solve the problem?

Yes: Solved
No: Go to Checkpoint 2

2. If you have printed between 100 and 300 pages, and it is your first ink cartridge, or it has been installed for at least 6 months, replace the ink cartridge.
Does this solve the problem?

Yes: Solved
No: Go to Checkpoint 3

3. If you have printed more than 300 pages, and it is your first ink cartridge, or it has been installed for at least 6 months, replace the ink cartridge.
Does this solve the problem?

Yes: Solved
No: Further help required

If red light again you must download resetter software from internet to reset your printer.

Aug 21, 2009 | Epson Stylus Photo 1290 InkJet Printer

1 Answer

I cannot get my cartridges to align. I keep getting a error message. It print black, but not in color


Have you already solved your problem? There are at least three posts about the same problem and about the PSC 950.
If you solved your problem, please comment, saying how you did it, so you can help others.

If you didn´t solve it, check this HP FAQ:
Solving Print Cartridge Alignment Problems

Note that it says (in the end) that you can bypass the alignment page and use the information from the last successful alignment in your printer, by pressing and hold the Enter button, and then press Setup .

I offered this same suggestion to another poster, who replied it didnn't solve his/her problem. It might work for you though. Please try and give some feedback (even if it is not positive).



Jul 18, 2009 | HP PSC 950 All-In-One InkJet Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

Philip Hughes

Level 2 Expert

63 Answers

Are you a Xerox Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...