Question about Lands Phones

1 Answer

ANSWERING MACHINE WON'T RECORD MESSAGES

HELLO. MY UNCLE HAS A TELSTRA M450 DIGITAL ANSWERING MACHINE. WHEN I ATTEMPT TO LEAVE A MESSAGE THE RECORDED VOICE INVITES ME TO LEAVE A MESSAGE AFTER THE TONE, THEN SAYS THAT THE MESSAGE BANK IS FULL.HE HAS CHECKED THAT THE MEMORY IS CLEARED BUT IT IS REPEATING THE SAME MESSAGE FOR SUBSEQUENT CALLS.CAN YOU HELP PLEASE? DI.

Posted by on

  • Jack Iaria
    Jack Iaria May 11, 2010

    You should try unplugging it for at least one minute to let it reboot.

    If this doesn't work please get back to me!



    jackiaria

    Tuesday 02-24-2009 5:55am EST (USA)

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,191 Answers

The answering machine is most likely referring to the other mail boxes.
if a caller presses 1 or 2 they record in the other mail boxes.On the machine you will see an envelope with a 1 or a 2 next to the envelope.
Press and hold one of these mail boxes and when the messages are played press del to delete each message as it plays. Do this for each mail box.
Have this answering machine and have experienced this problem.

Posted on Nov 13, 2012

  • Brett Duxbury
    Brett Duxbury Jul 23, 2015

    had this fault occur on my m450 . Take out the power cord for 30 seconds and plug it back in again.

×

3 Suggested Answers

  • 1 Answer

SOURCE: Telstra M450 answering machine manual?

you can by them for 10 bucks online from the telstra shop.

I need one too..... Let me know if you got one in pdf format.

creationinfinity@gmail.com

Posted on Mar 18, 2009

  • 1 Answer

SOURCE: how to get a message on a telstra m450 answering machine

Sorry, I have manual for this ridiculous device and i STILL can't program the wretched thing. By hitting buttons very fast more or less at random you CAN change the day, the minutes but changing the hour appears to be impossible. If ever there was a useless piece of junk it must be this machine. Here are the 'instructions' for what they are worth
To review to current set day and time, press the stop button.  To change the day and time, press and hold the STOP button (as the day and time are read back). To change the day, press the skip button (either one, apparently).
Next the hour will be read back. To change the hour press the skip button . Press the STOP button to set the selected hour.
Suppposedly the same process for the minutes.
Good luck. You'll need it.

Posted on Jun 04, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i set the answering system on a uniden 1580-3 phone, mine is just background noise on the answering machine when someone calls in to leave a message


Here is the manual for your phone. You can download the manual and the instructions for setting up your answering machine are on page 43:

http://www.uniden.com/pdf/DECT1580-3om.pdf

Setting Up the Answering System
You can set up your answering system's features from the handset. Only one handset at a time can access the answering system menus.

Note: If you have multiple bases, select the base with answering system you want to access (see page 15).

Recording a Personal Greeting
Your answering system comes with a pre-recorded outgoing message or greeting that plays when you receive a call: "Hello, no one is available to take your call. Please leave a message after the tone." You can record your own personal outgoing greeting. Your recorded greeting must be between two seconds and thirty seconds long.

Press /mute. The system announces the number of new and old messages, then starts to play the messages unless it has no messages.

Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the system is in the command waiting mode.

Press 8 to start the recording. The system announces, "Record greeting." Begin recording after the announcement.

When you finish recording, press 8 again or press 5. You will hear a confirmation tone, and your recorded greeting plays back for you.

Selecting a Greeting

Once you have recorded a personal greeting, the phone automatically switches to your personal greeting. You can
also switch back and forth between the pre-recorded greeting and your own greeting at any time.

Press /mute. The system announces the number of new and old messages, then starts to play the messages unless it has no messages.

Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the system is in the command waiting mode.

Press 6. The system plays the current greeting.

Jun 15, 2011 | Uniden 5.8GHz Expandable Cordless Phone...

1 Answer

I have a XS1455 answering m/c. Have a problem


Messagebank provides a personal answering service if your phone line is busy or you can't get to the phone. You don't need extra equipment like answering machines, and you also get greater flexibility on call waiting- if you don't want to interrupt your call, let messagebank take your message. Let me know if this answers your question. Master FixYa: saailer@att.net

Dec 05, 2009 | Uniden 2.4 GHz Expandable Phone System...

5 Answers

How to get a message on a telstra m450 answering machine


To change the answer message, hold ans on/off then HOLD the skip back button, don't let go until you finish the message, to change the amount of calls untill it plays the answer machine hold skip forward button till it says how many the press the forward button till you are happy, to change date and time, hold stop, it will say the day to change press skip forward, then press stop again, it will say the hour, press skip forward, then stop the minute, then skip forward, then stop again to confirm, i belive it is in 24hour time as well, when changing the time, but not on playback.

Hope this helps

Feb 08, 2009 | Lands Phones

1 Answer

Says machine is full, but there are no messages on the machine


make sure you retrieve all messages . I mean you may have 0 new messages, but you have lots of old messages ,it may full too.
Otherwise, delete all message, try to record incoming message or record your personal greating. Make sure the record function work, record chip works as well.

Jan 15, 2009 | GE 29875GE Digital Answering Machine

1 Answer

How to change announcement ?


Before using this answering system, you
should record the announcement (up to
one minute long) that callers will hear
when the system answers a call. If you
choose not to record an announcement,
the system answers with a prerecorded
announcement: “Hello. Please leave a
message after the tone.”
1 Press and hold "ANNC/SKIP" . The system
beeps. Speak toward the microphone
normally, from about nine inches away.
While you are recording, the Message
Window displays —.
2 To stop recording, release "ANNC/SKIP".
The system automatically plays back
your announcement.
To review your announcement, press
and release "ANNC/SKIP".

Nov 10, 2008 | AT&T 1717 Digital Answering Machine

1 Answer

Radio shack 43-3829 answering machine


Well, your machine might be broken, or you haven't set the little switch on the unit to ANS. The switch is on the side of the machine where the cables come out. But here are the instructions from the manual:

Recording Outgoing Messages:

Your answering machine has a built-in outgoing message, "Hello, please leave a message after the tone." You can use this message or record your own.

1. Hold the ANNC/DAY/<<, and speak clearly into the microphone, no more than 10 inches away.

2. Release the ANNC/DAY/<< when you finish. Your answering machine beeps and automatically plays back your recorded message.

*Your outgoing message must be between one and 60 seconds.

*If you record your won message but wish to revert to the pre-recorded message, press DELETE during playback of your outgoing message.

Nov 09, 2008 | Radio Shack 3825 Answering Machine

1 Answer

1188 answering machine


I have model no. 1188 bellsouth digital answering machine. If you have to leave a message, the message I recorded is no longer there, there is a generic message saying please record your message. How do I go back and record my voice with my message. I cannot find my original manual.

Oct 07, 2008 | BellSouth Digital Answering System 2006C...

2 Answers

1738 att answ machine-need to change message


Record Your Announcement
Before using this answering system, you
should record the announcement (up to
three minutes long) that callers will hear
when the system answers a call. If you
choose not to record an announcement,
the system answers with a pre-recorded
announcement: “HELLO. PLEASE LEAVE A
MESSAGE AFTER THE TONE.”
1 Press and hold a. When the
system beeps, speak toward the
microphone normally, from about nine
inches away. While you are recording,
the Message Window blinks .
To stop recording, release a.
The system automatically plays back
your announcement.
To review your announcement, press
and release a.
To erase your announcement and
return to the pre-recorded announcement,
press Dwhile your announcement is
playing.
Callers can skip the announcement by
pressing #.

Aug 10, 2008 | AT&T 1738 Digital Answering Machine

2 Answers

How do I change the recorded message?`


Record Your Announcement
Before using this answering system, you
should record the announcement (up to
three minutes long) that callers will hear
when the system answers a call. If you
choose not to record an announcement,
the system answers with a pre-recorded
announcement: “HELLO. PLEASE LEAVE A
MESSAGE AFTER THE TONE.”
1 Press and hold a. When the
system beeps, speak toward the
microphone normally, from about nine
inches away. While you are recording,
the Message Window blinks .
2 To stop recording, release a.
The system automatically plays back
your announcement.
To review your announcement, press
and release a.
To erase your announcement and
return to the pre-recorded announcement,
press Dwhile your announcement is
playing.
Callers can skip the announcement by
pressing #.

HAPPY TRAILS!!

Apr 17, 2008 | AT&T 1738 Digital Answering Machine

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

643 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

4922 Answers

yadayada
yadayada

Level 3 Expert

69199 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...