Question about Dell (3456p), 500 MHz Processor

1 Answer

Windows does not boot end up with a blk screen

Windows does not boot and i end up with a blk screen

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

Hi,

first go into safe mode
http://www.computerhope.com/issues/chsafe.htm

then try doing a system restore
http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/systemrestore.mspx

If you are still not able to get windows started, windows needs to be re-installed

Posted on Feb 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to change the boot options


see the Toshiba support page
http://support.toshiba.com/support/viewContentDetail?soid=627009
(I did not check if yours was listed in the applicable models down the LHS of the page)
Advice: do not keep the f2 button depressed, rather repetitively press it a few times per second (not as fast as you can).

There may be other methods to achieve your goal. What are you trying to do in the end ?


18.July.2014

Jul 11, 2014 | Toshiba Satellite P755D-S5378 15.6"...

1 Answer

Can't boot Windows


Hello Victor,

When you get the blue screen, try to remove those newly installed components. If not solve, second option is to restore your windows through windows restore and the last option, is to reformat and try to install again the windows.

Nov 10, 2013 | Asrock Z77E-ITX LGA1155/ DDR3/...

2 Answers

I cant go to the xp window


try repairing your OS.just insert the window cd installer went booting.follow the instructions.until you see repair you operating system or windows repair.

Jul 13, 2011 | Intel Pentium 4 1.7G, 1.7 GHz...

4 Answers

I have Installed Windows7 on Amd athlon64 2800 1 8 ghz athlon 64 k8smx motherboard, 1.5gb RAM, 500GB SATA HDD., It running dam slow & gives blue screen error, While booting it also specifies SATA...


Test your PSU or replace it if your power supply units fan is not working your PSU is faulty

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect/ boot up a computer hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your "((motherboard to your hard drive))" make sure they have a secure connection and are not faulty or just replace them they could be faulty
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error hope this helps

May 04, 2011 | AMD Athlon64 2800+, 1.8 GHz Athlon 64...

1 Answer

Is there another way to have my T3500 run in safe mode other than F8...When I press F8 while my computer is booting up it gives me a blank screen.


If you stop windows from booting up all the way by holding down the power button during the "loading windows" screen, until it turns off. Start it back up and before windows loads it will give you a menu, with options like "start windows in safe mode with networking" or "safe mode with command prompt"

May 03, 2011 | Dell Precision WorkStation T3500/ T5500/...

1 Answer

I did a restore to full factory settings but when I restart computer I think I lost the OS. When I restart the log in screen comes up wanting a user name and password which I dont have. I dont have a...


Here are a few things you can do or try Restart the computer. If you are already in Windows, you can do this from the Windows Start menu, go to Turn off computer and click Restart. As the computer restarts, watch for a progress bar at the bottom of the screen. press F8 about once every second. Immediately press F8 before the progress bar reaches the right side of the screen. From the Windows Start-up menu, highlight Safe Mode and press Enter. Wait for your desktop to appear, and then make the necessary repairs (for example, uninstall programs or devices). When the repairs are done, restart the computer, and allow it to boot normally. Alternate: From the Windows Start menu, click Run. In the Open field, type MSCONFIG and click Ok. On the BOOT.INI tab, check /SAFEBOOT. Click Restart when prompted.

http://majorgeeks.com/download.php?det=5710
UBCD4Win is a bootable CD which contains software that allows you to repair, restore, or diagnose almost any computer problem also has a bios reset tool which can remove your password and bios password
you will have to burn it to a disk as an ISO then you will have to boot from the disc During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS the scroll down to advanced bios features press enter change your first boot device to cd press escape then press f10 to save to cmos to restart (note after you have removed your password you will have change first boot back to your hard drive) Hope this helps

Apr 15, 2011 | Computer Processors

1 Answer

Computer not booting up


Hi,

This sound like you might have corrupted windows systems files. See if you can restart the PC using the last known configuration. You can do the by pressing the F8 key during the windows startup process.

Mar 24, 2009 | Computer Processors

1 Answer

WINDOWS XP PRO SERVICE PACK 3


First off, please use proper case. All upper case makes it look like you are shouting. Thanks.

Try removing everything you can possibly remove from the outside other than the monitor. Remove any cards inside not needed to boot (sound, NIC, modem, etc.).

Disconnect mouse and keyboard, too if it will boot without a keyboard. Some systems will halt at the BIOS screen without a keyboard.

When you have a minimum config for booting, boot and see if it stays on. If so, one of the items disconnected is the culprit.

If not, reconnect keyboard (if disconnected) and boot into Safe mode by tapping F8 after BIOS screen. See if it will stay on in safe mode. If it will stay on in safe mode, problem is O/S.

If it won't stay on in safe mode, see how long it will stay on at the BIOS screen. If it will stay on indefinitely, you could have flaky RAM or possibly hard drive. Power off, unplug power cable, remove hard drive and see if you can boot to the Windows CD. If it will boot up to Starting Windows and stay on, probably not RAM although that is not a definitive test. At that point, I'd try another hard drive and see if the O/S will install or try wiping and reloading the original hard drive.

Let me know if you need more help.

Honest1abe

Jan 17, 2009 | SuperMicro Pentium III Xeon (TMR-004)...

1 Answer

Incomplete booting,


I suggest you set your computer to boot from cd and repair windows installation insert cd reboot computer when asked press a key to boot from cd wait until all drivers etc are loaded a screen will come up asking you what you want to do.
Press R key and follow instructions to repair your installation of windows

Jul 05, 2008 | Dell Computer Processors

Not finding what you are looking for?

Open Questions:

See all Dell (3456p), 500 MHz Processor Questions

Dell (3456p), 500 MHz Processor Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computer Processors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Q4SteveB

Level 2 Expert

159 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Are you a Dell Computer Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...