Question about ViewSonic N3735W 37 in. LCD TV
SOURCE: power lock enable
To get rid of the power button enable you need to either press and hold the power button on the tv ( not on the remote control pad) for approx 15 seconds or if that does not work do the same using the source button
Posted on Jul 18, 2008
Actually its a panel fault. You will need new inverter board for the panel. (That is if you get the power and sound, but no picture)
Posted on Sep 12, 2008
SOURCE: Viewsonic n4060w
HI I AM A TECH. I WORK FOR A COMPANY THAT REPAIRS LCD TV'S. IF YOU HAVE SOUND AND NO PIC YOU WILL NEED AN INVERTER BOARD THERE IS A WEB SITE CALLED SHOPJIMMY.COM THEY MAY HAVE IT
Posted on Mar 17, 2009
I have a 19" ViewSonic and if you hold down the 2nd and 3rd buttons together under the screen, counting from the LEFT, it will disable the Powerlock.
Posted on Jan 01, 2010
You may have bad main logic board, http://www.shopjimmy.com/catalogsearch/result/?q=n3752
The back light is working for sure, you may want to check if the Power supply on signal goes to 5v when you push the power button.
If you are going to DIY and have proper tools and know safety precaution then please read on:
Please see my basic troubleshooting guide here:
Posted on Jun 30, 2010
This is caused by ether a stuck button pad under the actual button on the panel or a faulty control board that has the button pads on them, what would need to be done is first investigate if there are any stuck buttons then replace the actual board if that is not the case,
let me know if you have any questions, otherwise please do leave positive feedback and ratings for your free answer today, Thanks
Posted on Oct 12, 2010
Testimonial: "Quick response time! thanks!!"
Tips for a great answer:
on Aug 01, 2010 | Flat Panel Televisions
Mar 21, 2011 | ViewSonic Flat Panel Televisions
Mar 03, 2011 | ViewSonic VT2300LED 23 in LCD TV
Aug 31, 2009 | ViewSonic N2060w 20 in. LCD Television
Jul 13, 2014 | ViewSonic N3735W 37 in. LCD TV
Jun 22, 2014 | ViewSonic N3735W 37 in. LCD TV
157 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: